Page History

х32: (X32)\Audio
x64: (x64)\Audio

Gain_control

0, 1, 2

-

up to  4.7.6

Sets the volume control parameter: 

0 - no volume control;
1 - integer processing (less accurate, but faster);

2 - extra accuracy (CPU overload is possible if there are a lot of channels).

х32: (X32)\Audio
x64: (x64)\Audio

Max_file_len_sec

 > = 0

 600

4.7.4 and later

Defines max. length of audio file (sec) when recording via audio player.

х32: (X32)\Audio\
Card\ «Card Name»
x64: (x64)\Audio\Card\ «Card Name»

mix

0, 1

0

4.7.4 and later

Sets input mixing.

0 – logging is disabled.

1 or other value different from 0 – streams logging is enabled.

х32: (x32)
x64: (x64)

ChangePort

> = 0

Depends on the port specified for the Client.

4.7.3 and later

Allows changing the port number. For instance, if it is necessary to change port 20900 to 40900, then 20900="40900" string parameter is created.
The change of this parameter can affect the system.

х32: (x32)
x64: (x64)

CheckPingPeriod

> 0

 10

4.7.4 and later 

Sets Server-computer ping period.

х32: (x32)
x64: (x64)

CheckVersion

0, 1

0

4.7.4 and later

Sets the parameters of Server connection: the version is checked in connected version parameters. If versions do not agree, then there is a corresponding message and no connection.

х32: (x32)
x64: (x64)

Core IP Address

IP address

 -

4.7.3 and later 

Address of the computer to the core of which the slave.exe is to connect.

х32: (x32)
x64: (x64)

DBAttempts

1..∞

 10

4.7.3 and later

Number of attempts to connect to database.

х32: (x32)
x64: (x64)

Debug

1,2,3

0

4.7.3 and later

Sets the debug mode:
0 – disabled;

1 - information is shown in the process window;

2 - information is shown in the process window and logged;

3 - extended log.

х32: (x32)
x64: (x64)

DebugExtension

Any string

LOG

4.7.3 and later

Sets extensions of log files.

х32: (x32)
x64: (x64)

DebugFlushPeriod

> = 0

500

4.7.4 and later

Sets the update rate for log files (ms).

х32: (x32)
x64: (x64)

DebugOptions

Range in decimalsystem: 0-255. 

0x001 (i.e. 1)

4.7.3 and later

Hexadecimal logging in the debug mode. This parameter has a complex structure (bit mask) and it is modified using the Tweaki.exe utility.

х32: (x32)
x64: (x64)

DebugQueueMaxLines

0 - 2147483647

2000

4.7.4 and later

Specifies max. number of messages in a queue to log file. If there are more than 500 log lines in the queue, then they are to be scaled.

х32: (x32)
x64: (x64)

DebugSize

 0-2147483647

1

4.7.3 and later

Specifies the number of megabytes provided for log. Restricted by disk capacity.

х32: (x32)
x64: (x64)

DebugTime

 0-2147483647

48

4.7.3 and later

Specifies the number of hours for storing log files.

х32: (x32)
x64: (x64)

defaultconnection

 0, 1

1

4.7.4 and later

Allows setting connections in the architecture only with the computer where the Computer object is created.

х32: (x32)
x64: (x64)

DisableProtocol

0, 1

0

4.7.3 and later

Allows disabling protocol.

х32: (x32)
x64: (x64)

DisableThreadStatQueue

0, 1

0

4.8.0 and later

By default the key is not created.

Defines whether the queue statistics is called or not. If the registry key value=1, then the box can not be called.

To call the Queue statistics box, follow the steps:

х32: (x32)
x64: (x64)

InstallFolder

Intellect

4.7.3 and later

Specifies the installation folder.

х32: (x32)
x64: (x64)

Ip_port

0, 1

up to  4.7.6

Specifies the port using which the IP camera will operate on the Computer object.

х32: (x32)
x64: (x64)

Language

0x0419

-

4.7.3 and later

Specifies the language to use (0x0419 - English). 

х32: (x32)
x64: (x64)

LogIncommingMsg

0, 1

not created

up to  4.8.0

Defines whether logging of incoming events is enabled or not.

х32: (x32)
x64: (x64)

LogOutgoingMsg

0, 1

not created

up to  4.8.0

Defines whether logging of outgoing events is enabled or not.

х32: (x32)
x64: (x64)

LogStatistics

0, 1

not created

up to  4.8.0

Defines whether the statistics is logged or not.

х32: (x32)
x64: (x64)

OnlyLocalProtocol

0, 1

0

4.7.3 and later

Only local events are logged.

х32: (x32)
x64: (x64)

PeakWorkingSetSizeQuota

>=0

0

4.8.1 and later

Sets RAM limit (MB). When this limit is exceeded, the module that exceeded this limit will be restarted in the restart service.

х32: (x32)
x64: (x64)

PhotoCores

Name or IP address 

-

4.7.3 and later

The list of computers (cores) for mailing user photos.

х32: (x32)
x64: (x64)

PriorityClass

256,

128,

32768,

32,

16384,

64

 16384

4.7.3 and later

Defines the stream priority:

256 - realtime

128 - high

32768 - Above Normal

32 - normal

16384 - below Normal

64 - low

х32: (x32)
x64: (x64)

ShowCrashMessage

0, 1

0

4.7.5 and later

Create or not the module crash message. 

х32: (x32)
x64: (x64)

SyncTime

0, 1

0

Defines whether to synchronize time between computers or not.

х32: (x32)
x64: (x64)

Topmost

0, 1

1

4.7.4 and later

Sets the splash screen location:
1 - splash screen is topmost;
0 - screen is hidden behind other windows.

х32: (x32)
x64: (x64)

Type_view_dept_log

0,1,2

0

4.7.4 and later

Specifies displaying the  name of department in the log:

0 - do not add:  Ivanov Ivan Ivanovich;  
1 - add to the beginning:
[Sales department] Ivanov Ivan Ivanovich;
2 - add to the end:
Ivanov Ivan Ivanovich [Sales department].

х32: (x32)
x64: (x64)

URAttempts

 0 - 10000

3

4.7.3 and later

Sets the number of attempts to enter the user password .

х32: (x32)
x64: (x64)

URDelay

 0 - 10000

10

4.7.3 and later

Sets the delay period (sec) for re-entering the system.

х32: (x32)
x64: (x64)

virtualgrabber

0, 1

0

4.7.6 and later

Defines whether it is possible to create  a virtual video capture card or no.

х32: (x32)
x64: (x64)

SyncNotEmpty

0, 1

0

4.8.5 and later

Defines the database synchronization algorithm:

1 – fast synchronization algorithm is in use;

0 -  standard synchronization algorithm is in use.

х32: (x32)\Debug
x64: (x64)\Debug

counter_period

>=0

0

4.9.0 and later

Defines the time period in seconds, in which information about availability of processor, memory and disk is recorded to the log-file. If the value of parameter is 0, this information is not included to the log-file.

x32: (x32)\ IntellectRunService
x64: (x64)\ IntellectRunService

RestartIntellectOnLogonDisable

0, 1

0

4.9.0 and later

1 – Intellect installed as a Service is not restarted under the current user even for users belonging to the IntellectUsers group.

0 – Intellect installed as a Service is restarted under the current user only if the user belongs to the IntellectUsers group.

x32: (x32)\ IntellectRunService
x64: (x64)\ IntellectRunService

CheckUserForRestartIntellectDisable

0, 1

-

4.9.0 and later

0 – Intellect installed as a Service is restarted (when entering the system) under the current user only if the user belongs to the IntellectUsers group.

1 – Intellect installed as a Service is restarted (when entering the system) under the current user even if the user doesn’t belong to the IntellectUsers group. The settings of permissions are to be taken into account when using this key. If the permissions are set incorrectly, then some Intellect features can operate incorrectly.

x32: (x32)
x64: (x64)

ShowHiddenObjects

0, 1

0

4.9.0 and later

0 – hidden objects corresponding to IntegratedAudioSource and IntegratedVideoSource objects, as well as to Integrated device child objects are not shown in the object tree in Intellect.

1 – hidden objects are shown in the object tree in Intellect.

Intellect is to be restarted when the key value is changed.

x32: (x32)
x64: (x64)

InheritServiceEnviroment

0, 1

-

4.8.8 only

The key is essential for proper operation of Intellect in MS failover cluster.

x32: (x32)\ IntellectRunService\
x64: (x64)\ IntellectRunService\

InheritServiceEnvironment

0, 1

-

4.9.0 and later

The key is essential for proper operation of Intellect in MS failover cluster.

x32: (x32)
x64: (x64)

SortCamsById

0, 1

-

4.8.8 and later

The key is responsible for sorting the list of cameras on the settings panelof the Monitor object.

1 – cameras are sorted by ID;

0 – cameras are sorted by names.

x32: (x32)
x64: (x64)

EventProcessingThreads

>=0

0

4.9.0

Key reserves the specified number of streams for events processing.

х32: (x32)\Debug
x64: (x64)\Debug

DumpYUV

0, 1

-

4.9.0.959

Key activates the mode of video dump corresponding to compressor.  It is required for diagnostics of StreamLabs (motionWavelet7.1) compressor/decompressor problems.

File (or files) with decompressed data will be created by key in the Modules directory. Names of files correspond to the template:
WxH_hv_chunk_№.yuv

W – width;
H – height;
h – horizontal subsampling;
v – vertical subsampling;
№ - number of file. If resolution or subsampling are changed the new file openes.

For example, file with resolution 640x480 in YUV420 color area will have the 640x480_22_chunk_0.yuv name.

x32: (x32)
x64: (x64)

x32: (x32)
x64: (x64)

0 – receiving of the SETUP reaction from the ATM object is disabled on the computer where this key is specified.

1 - receiving of the SETUP reaction from the ATM object is enabled on the computer where this key is specified. 

1 - F10 and F11 hot keys are in use to control screen displaying (see Main control panel section).

x32: (x32)
x64: (x64)

When the key value = 1, video or archive period is exported from the Monitor interface using the admin password.

By default the key is not created, the value is 10.

The key specifies maximum waiting time (in milliseconds) before sending data over the network.

The higher the value of this parameter, the more productive the system is (due to decreasing resources when sending a large amount of small messages).

The key sets the delay between disabling Guardant and unloading Intellect.

The delay is essential for the FORCED_OFF event generation of the SLAVE object and in case this event is used in scripts or programs, these scripts and programs are executed.

The key is for specifying the way of sorting objects in the tree:

0 – sorting by name.

1 – sorting by ID.

х32: (X32)\
TELEMETRY
x64: (x64)\TELEMETRY

Delay

> = 0

250

4.7.3 and later

Defines the delay (ms) when sending commands to the camera. This key is essential for scaling the stream of commands to the device as some devices can be blocked because of too many commands and cannot process the information.

This parameter is not supported by IP cameras.

х32: (X32)\
TELEMETRY
x64: (x64)\TELEMETRY

JoysticThreshold

> = 0

5

4.7.6 HOTFIX and later

This parameter sets the joystick trigger threshold: the less the number is, the more sensitive joystick is.

0 value is not recommended to be used, as commands can be sent randomly.  When the value is too big, the joystick becomes rotation-insensitive.

х32: (X32)\
TELEMETRY
x64: (x64)\TELEMETRY

max_speed

0-10

-

4.7.3 to 4.9.7

Sets max. camera speed.

х32: (X32)\
TELEMETRY
x64: (x64)\TELEMETRY

min_speed

0-10

-

4.7.3 to 4.9.7

Sets min. camera speed.

х32: (X32)\
TELEMETRY
x64: (x64)\TELEMETRY

PriorityDelay

> =  0

30000

4.7.3 and later

Defines the priority delay (ms).

х32: (X32)\
TELEMETRY
x64: (x64)\TELEMETRY

UseBoschOSRD40

0, 1

-

4.8.4 and later

Enables presets saving for Bosch-Autodome control protocol.

х32: (X32)\
TELEMETRY
x64: (x64)\TELEMETRY

PnPJoystick

0, 1

0

4.8.3 and later 

The key defines whether to restart Intellect after connecting a joystick:

0 - Intellect is to be restarted after connecting the joystick.
1 - Intellect is not to be restarted after connecting the joystick.

х32: (X32)\
TELEMETRY
x64: (x64)\TELEMETRY

Zenable

0, 1

1

4.7.7 and later 

The key is in use with joysticks (e.g., Logitech Attack 3) where the telemetry control operates incorrectly because of shifted Z axis. Z axis is disabled when the parameter value is 0.  Z axis is enabled when the parameter value is 1.

The key is used in order to set the zoom step when panasonic-850 telemetry protocol is in use:

1 – zooming with 50% step of max. possible

0 – zooming with 20% step of max. possible

The key is responsible for coordinate move in the Z-direction.

The key is responsible for coordinate move in the Y-direction.

The key is responsible for coordinate move in the X-direction.

The key specifies way of  command transmission to telemetry:

1 – telemetry server is connected to video servers and sends commands to devices.

0 – telemetry server sends commands to the Intellect core which send them to devices.

See also description of the MonitorToTelemetryDirectCommand key below.

The key specifies way of transmission telemetry commands while control from the Monitor:

1 – telemetry server is connected to video servers and sends commands to devices while telemetry control from the Monitor.

0 – telemetry server sends commands to the Intellect core which send them to devices while telemetry control from the Monitor.

The key is in use with the TelemetryDirectCommand key to provide smoother telemetry control. Recommended values of these keys:

TelemetryDirectCommand = 1 (default value)

MonitorToTelemetryDirectCommand = 1 (attention: default value is 0)

The key is to enable the function of sending events to Intellect core when controlling PTZ. This function is essential for PTZ control audit.

1 – when sending any reaction of TELEMETRY object the corresponding event is generated.

The key enables presets created on the camera in Intellect. The function is only available when camera is connected via ONVIF protocol.

0 – presets created on the camera are not used in Intellect.

1 – presets created on the camera are in use in Intellect. The features are listed below:

1. As preset numeration starts differently on various cameras (with 0 or 1), then preset numbers can differ by 1 in Intellect. If the numeration on the camera starts with 0, then numeration in Intellect is the same. If the numeration on the camera starts with 1, then numeration in Intellect is greater by 1 (for instance, the first preset on the camera corresponds to the second in Intellect and the first in Intellect is not active).

х32: (X32)\Player
x64: (x64)\Player

Wav_delay

> = 0

0

 4.7.3 and later 

Defines the sound delay (sec) when playing back synchronously video with the sound.

х32: (X32)\ EventViewer
x64: (x64)\EventViewer

Overlay

0, 1

1

4.7.3 and later

Defines whether to use overlay.

х32: (X32)\ EventViewer
x64: (x64)\EventViewer

Topmost

0, 1

0

4.7.3 and later

Defines whether to display event log as topmost window: 

0 - standard window;

1 - topmost window.

х32: (X32)\ Subscribe
x64: (x64)\Subscribe

OBJECT_NAME

(*) (№.*) (№.№)

4.7.3 and later

Describes rules for system starting. Unimplemented system objects are disabled.

You should create a string parameter with the name that is used by the system of the object that is to be disabled and specify its ID separated by a full stop.
Example: DEPARTMENT.1:
«0» - disable,
«1» - enable
The “.*” parameter can be used - in this case all objects with “DEPARTMENT” name are disabled. Take into account that parameter with the ID is of a higher priority than the “.*” parameter. So there is no need to describe all objects by listing their IDs if there are a lot of objects that are to be disabled. You can just set 0 value to the “.*” parameter and list the objects that are not to be disabled.
All values are to be written in capital letters.
This registry section is applied to all system objects.

х32: (X32)\Video
x64: (x64)\Video

ArchiveFps

1-24

4.7.5 and later

Sets the number of frames recorded to the archive (max.resolution). LiveFps and ArchiveFps parameters are not to exceed 24 in total.

х32: (X32)\Video
x64: (x64)\Video

ArecontVision

0, 1

up to  4.8.0

Enables the protocol for integrating Arecont cameras. The key is not in use.

х32: (X32)\Video
x64: (x64)\Video

DoubleStream

0, 1

4.7.5 and later

Defines whether asynchronous video display mode is enabled or not.

х32: (X32)\Video
x64: (x64)\Video

IpIntDrivers3

Brand name: Axis; Acti, etc.

4.7.3 and later

The IpIntDrivers3 string parameter is created and the names of brands that need 3.0 driver are listed.

х32: (X32)\Video
x64: (x64)\Video

IpIntDriverVersion

2, 3

4.7.3 and later

Defines the version number of loaded drivers:
2 – to load drivers version 2.0;
3 - to load drivers version 3.0;
This parameter has a high priority and cancels IpIntDrivers3 parameter.

х32: (X32)\Video
x64: (x64)\Video

LiveFps

1-24

4.7.5 and later

Sets the number of frames displayed in the 800х600 format. LiveFps and ArchiveFps parameters are not to exceed 24 in total.

х32: (X32)
x64: (x64)

LoadIpIntDirectly

0, 1

4.9.0 and later 

1 - enable IntegratedDevice via video.run. If the setting is enabled and at least one IntegratedDevice is added, then other IP video capture cards are disabled.

0 - IIntegratedDevice operates as a separate run-module.

х32: (X32)\Video\MetadataTransportProtocols
x64: (x64)\Video\MetadataTransportProtocols

The name of camera driver (in the driver parameter of the

The key sets unused driver unload timeout for cameras when, for instance, connection to the camera is lost.

If the key is not created, then unused drivers are unloaded in 60 seconds.

0 – drivers do not unload (such behavior was in DriverPack versions older than the current one).

The key value that is > 0 sets unused driver unload timeout.

х32: (X32)\ DB Import
x64: (x64)\ DB Import

ChunkSize

> 0 and >= photo size

32768

4.7.3 and later

Sets the buffer size (in bytes) when reading large files (photo) in the external DB.

х32: (X32)\ DB Import
x64: (x64)\ DB Import

CursorLocation

1, 2, 3

2

4.7.3 and later

Sets the cursor location (pointer to DB entries):
1 – do not create the cursor;
2 – create the cursor on the Server;
3 – create the cursor on the Client.

х32: (X32)\ DB Import
x64: (x64)\ DB Import

DwSleep

> = 0

1

4.7.3 and later

Sets the delay value (ms) when sending modified entries to the core in the external DB in order not to get 100% CPU load.

х32: (X32)\ DB Import
x64: (x64)\ DB Import

FlagsLog

-

-

up to 4.7.5

х32: (X32)\ DB Import
x64: (x64)\ DB Import

MoveFirst

0

0

4.7.3 and later

The key must not be modified.

х32: (X32)\ events
x64: (x64)\ events

Events_out

-

-

up to 4.7.5

Debug key

х32: (X32)\ events
x64: (x64)\ events

Events_out2

-

-

up to 4.7.5

Debug key

х32: (X32)\ events
x64: (x64)\ events

In

-

-

up to 4.7.5

Debug key

х32: (X32)\ events
x64: (x64)\ events

PostedEvents

-

-

up to 4.7.5

Debug key

х32: (X32)\ events
x64: (x64)\ events

PostedReacts

-

-

up to 4.7.5

Debug key

х32: (X32)\ events
x64: (x64)\ events

Reacts_out

-

-

up to 4.7.5

Debug key

х32: (X32)\ Keyb
x64: HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\ITV\ INTELLECT\Keyb

Prefix

VK_NUMPAD0
VK_NUMPAD1
VK_NUMPAD2
VK_NUMPAD3
VK_NUMPAD4
VK_NUMPAD5
VK_NUMPAD6
VK_NUMPAD7
VK_NUMPAD8
VK_NUMPAD9
VK_MULTIPLY
VK_ADD
VK_SEPARATOR
VK_SUBTRACT
VK_DECIMAL
VK_DIVIDE
VK_F1
VK_F2
VK_F3
VK_F4
VK_F5
VK_F6
VK_F7
VK_F8
VK_F9
VK_F10
VK_F11
VK_F12
VK_F13
VK_F14
VK_F15
VK_F16
VK_F17
VK_F18
VK_F19
VK_F20
VK_F21
VK_F22
VK_F23
VK_F24

0x60

0x61

0x62

0x63

0x64

0x65

0x66

0x67

0x68

0x69

0x6A

0x6B

0x6C

0x6D

0x6E

0x6F

0x70

0x71

0x72

0x73

0x74

0x75

0x76

0x77

0x78

0x79

0x7A

0x7B

0x7C

0x7D

0x7E

0x7F

0x80

0x81

0x82

0x83

0x84

0x85

0x86

0x87

4.7.3 and later

The list is not full. Any soft key can be in use.

x32: (X32)\Video\Detectors\Vmda

x64:

(x64)\Video\Detectors\Vmda

InactiveInterval

>0

-

4.9.0

Key specifies time period in minutes, during which absence of detected objects by tracker is permitted. If the key is created, after the specified time and if there is no activity of VMDA detection, the message about inactivity will be generated. On default, this message is not generated.

x32: (x32)\WebServer\

x64:

Sets max.time (in milliseconds) for Server to process a request.

x32: (x32)\WebServer\

x64:

x32: (x32)\Map\

x64:

x32: (x32)\Map\

x64:

The key is designed to disable object framing.

0 – the object is framed.

x32: (x32)\MMS\

x64:

x32: (x32)\Script\

x64:

х32: (X32)\Video
x64: (x64)\Video

UseRealTimeStamps

Comma-separated camera identifiers

-

4.9.5 to 4.9.7

Identifiers are separated by commas for cameras for which current timestamps are to be sent. Due to features of the unattended object detection tool (that is a third-party module) it sends synthetic timestamps by default.

х32: (X32)\Video
x64: (x64)\Video

unattendedObjectSensitivity

Comma-separated sensitivity values in the ‘camera id.sensitivity’ format.

Sensitivity range –[1...25]

EXAMPLE: unattendedObjectSensitivity="1.15,99.20,4.7"

7 for all cameras

4.9.5 to 4.9.7

Sets sensitivity of unattended objects detection tool for specified cameras.

х32: (X32)\Video
x64: (x64)\Video

unattendedObjectLongMemory

Comma-separated camera identifiers

EXAMPLE unattendedObjectLongMemory ="1,1000,2,999,3,5,4,6,7,8"

-

4.9.5 to 4.9.7

Sets identifiers of cameras to which the unattended object detection tool with long memory is to be used.

х32: (X32)\Video
x64: (x64)\Video

unattendedObjectTimeBeforeCheck

Values of periods are comma-separated and are in the ‘camera id.period’ format.

EXAMPLE unattendedObjectTimeBeforeCheck = "4.20,1.10,3.40"

By default it is the same as the waiting for loss period set while configuring the Tracker object (see Creating and configuring the Tracker object).

4.9.5 to 4.9.7

Time in seconds before checking object in case of using the unattended object detection tool with long memory.

х32: (X32)\Video
x64: (x64)\Video

determineNoise

0, 1

1

4.9.5 to 4.9.7

Use (1) or not (0) the algorithms for detecting pseudo-moving objects

х32: (X32)\Video
x64: (x64)\Video

determineColorIdentity

0, 1

1

4.9.5 to 4.9.7

Use (1) or not (0) the algorithms for detecting objects matching by their color characteristics 

х32: (X32)\Video
x64: (x64)\Video

determineHumanCar

Comma-separated camera identifiers.

EXAMPLE determineHumanCar ="1,1000,2,999,3,5,4,6,7,8"

-

4.9.5 to 4.9.7

Sets the list of camera identifiers for which the algorithm of determining whether it is a car or a human is to be ENABLED.

For proper operation of the tracker determineGivenTaken and determineHumanCar keys MUST be used at the same time. There is no point in using only one key.

х32: (X32)\Video
x64: (x64)\Video

determineGivenTaken

Comma-separated camera identifiers.

EXAMPLE determineGivenTaken ="1,1000,2,999,3,5,4,6,7,8"

4.9.5 to 4.9.7

Sets the list of camera identifiers for which the algorithm of determining whether the object is given or taken is to be enabled in the unattended object detection tool.

For proper operation of the tracker determineGivenTaken and determineHumanCar keys MUST be used at the same time. There is no point in using only one key.

х32: (X32)\Video
x64: (x64)\Video

VMDAFPS

>=-1

30

4.9.5 to 4.9.7

Sets fps to be sent to the tracker.  
-1 – ALL FRAMES
0 – send a frame to the tracker if the tracker is available (processed the previous frame).
>0 – maximum fps sent to the tracker.

The key specifies usage of previous frame processing before its sending to video analytics repository:

0 – not to use.

1 – to use.

If the key is enabled, it's in use for all cameras.

Important! The useFilterFrame parameter is to have ‘1’ value for key operation (see below).

The key specifies post processing usage of frames received from video analytics repository. Procedure is configured only for operation with frames from left-off items detection, so it can operate incorrectly with frames from tracker. If the key is enabled, it is in use for all cameras.

Important! The useFilterFrame parameter is to have ‘1’ value for key operation (see below).

The key is responsible for enabling frame pre-process before its analysis. If it is disabled, useLeftImprover and useLeftImproverGeometry keys won’t work (see above).

1 – enabled;

0 – disabled.

 х32: (X32)\Video\AVI
x64: (x64)\Video\AVI

1 – utility is started in export mode in the AXXN codec if Export to AVI in initial format item is selected.

0 – export is possibly performed in original format.

Key sets priorities of the AviExport utility and is used by the Video.run module while its starting:

-2 – low priority (IDLE_PRIORITY_CLASS)

-1 – below average priority(BELOW_NORMAL_PRIORITY_CLASS)

 0 – average priority (NORMAL_PRIORITY_CLASS)

 1 – above average priority (ABOVE_NORMAL_PRIORITY_CLASS)

 2 – high priority (HIGH_PRIORITY_CLASS)

х32: (х32)\POS
x64: (х64)\POS

Capture

0, 1

1

4.7.3 and later

Defines whether to store log-files or not. 
Log-files are stored in the IntellectFolder\Modules\PosCapture folder.

х32: (х32)\POS
x64: (х64)\POS

Dos2Win

0, 1

1

4.7.3 and later

Detects encoding:
1 - read XML encoding in DOS codepage;
0 - read  XML as it is

х32: (х32)\POS
x64: (х64)\POS

GlobalTextDelay

-

0

4.7.3 and later

Sets the shift of Text data from video to TextSearch.

х32: (х32)\POS
x64: (х64)\POS

Nohotkey

0, 1

1

4.7.3 and later

Allows disabling hot keys used for POSVIEWER and TITLEVIEWER. If Nohotkey = 1, then when clicking
Ctrl+Shift+E - the frame export folder is opened;
Ctrl+Shift+T - the Tools folder is opened.

х32: (х32)\POS
x64: (х64)\POS

PosLogMaxsize

>0

10

5.1

The key sets maximum size (in MBs) of the POS terminal’s log.

Note. POS terminal logging is enabled using the Capture key – see above.

х32: (х32)\FRS
x64: (х64)\FRS

The key defines on how many CPU cores the face recognition module will operate (firserver.run process). All cores are in use by default.

The key sets the timeout upon which Face Server ‘loses’ the face if there is no new data about it.

Sets the parameters of generating and attaching face biometrics in the detection tool:

1 – Face detection tools generate and attach face biometrics to the photo. 

0 – Face detection tools do not generate face biometrics - the face is only captured.

Note. Face recognition Server that performs search in the user database checks up whether it has attached biometrics when it gets a face photo. If yes, then biometrics are not further generated for search in the database - data attached to the photo is in use. If no, then recognition Server generates biometrics itself using the photo. 

Specifies what data will be stored in the database when using the Face recognition Server:

1 - all captured faces.
0 - only the faces about which there are recognition results.

The key is in use in order to avoid the database overflow.

The key is used to configure the face detection tool – it sets time on the expiry of which the face is considered lost.

For instance, if timeUntilLost = 1 and a man covers his face with the hands in front of the camera and then shows it again, then the face detection tool does not capture it as it considers that the face was lost for the time it was covered.

The key allows selecting of algorithm for Tevian face recognition and seach.

0 – the less resourceintensive algorithm is in use.

1 – the more resourceintensive algorithm is in use.

Attention! Biometric vectors received by one algorithm can't be used with vectors received by another algorithm. It's required to convert biometric vectors for correct operation of the Face-Intellect software after changing the algorithm (see the Switching over face recognition modules section).

The key specifies mode of storing metadata, images and vectors.

0 – metadata, images and vectors are storing only in database.

1 – metadata, images and vectors are storing in database, images and vectors are also storing in a folder on disk. Path to folder is specified using the FaceDB parameter.

2 – metadata are storing in database, images and vectors are storing only in a folder on disk. Path to folder is specified using the FaceDB parameter.

x32: (х32)\DetectorExt\HeatZoneDetector

x64: (х64)\DetectorExt\HeatZoneDetector
 

Sets the data collection frequency (sec) for heat zone detection tool.

x32: (х32)\DetectorExt\HeatZoneDetector

x64: (х64)\DetectorExt\HeatZoneDetector

Sets the data update frequency (sec) from heat zone detection tool in the Debug window in seconds.

Rovalant A6-A16 ISS 

х32: (х32)\Rovalant_A6_A16
x64: (х64)\Rovalant_A6_A16

access_point_count

-

10

4.7.6 and later

Internal module setting. You’d better not modify the key.

х32: (х32)\Rovalant_A6_A16
x64: (х64)\Rovalant_A6_A16

rele_count

-

20

4.7.6 and later

Internal module setting. You’d better not modify the key. 

Apollo (AAN 100, AAN 32, AIM-4, AIM-4SL)

х32: (х32)\Apollo
x64: (х64)\Apollo

DisableLogOffLineEvents

0, 1

0

4.7.4 and later

Disables event logging when the controller is in the offline mode.

х32: (х32)\Apollo
x64: (х64)\Apollo

EnableHardwareReset

0, 1

1

4.7.4 and later

Enables hardware reset before forwarding configuration.

х32: (х32)\Apollo
x64: (х64)\Apollo

nCardType

0, 1

0

4.7.4 and later

Defines the card type. When the value is 1, support for Weigand32 is enabled.

х32: (х32)\Apollo
x64: (х64)\Apollo

nPINType

0, 1, 2

1

4.7.4 and later

Defines whether PIN is in use:
0 – not is use;
1- PIN 4 figures;
2 - PIN 6 figures.

х32: (х32)\Apollo
x64: (х64)\Apollo

SetLinkParametersAfterReset

0, 1

1

4.7.4 and later

Sets link parameters after reset.

ABC (Access Net) 

х32: (х32)\ABC
x64: (х64)\ABC

UseDynamic

0, 1

0

4.7.4 and later

Defines whether the Dynamic checkbox is available in the controller settings. In this case configuration forwarding in a separate stream can cause module crash.

х32: (х32)\ABC
x64: (х64)\ABC

UseMultiThreaded

0, 1

0

4.7.4 and later

Sets the use of the multithreading mode.

Perco Card Reader

х32: (х32)\Perco CR
x64: (х64)\Perco CR

ReadTotalTimeoutConstant

> = 0

-

4.7.4 and later

Sets timeout of reader query. If connection is lost sometimes, then the value is to be increased.

PERCO-SYSTEM-12000L ACS 

х32: (х32)\Perco
x64: (х64)\Perco

AdditionNumberOfCard

0

4.7.4 and later

If the number of card is read with displacement (error of COM Server Perco), then the value of this parameter defines the displacement.

х32: (х32)\Perco
x64: (х64)\Perco

AutoconfigType

0, 1,2,3

0

4.7.5 and later

Sets auto configuration mode:
0 – feature is not available;
1 – controllers that do not exist are deleted;
2  - controllers that do not exist are deleted and new found controllers are stored at the end of the object tree;
3 – new found controllers are stored at the end of the object tree.

х32: (х32)\Perco
x64: (х64)\Perco

DisableOffLine

0, 1, 2

0

4.7.4 and later

0  - standard action;
1 - controller access  to all cards with  shift schedule is forbidden;
2 - controller access to all cards is forbidden.

х32: (х32)\Perco
x64: (х64)\Perco

RequestTime

> = 0

1000

4.7.4 and later

Sets the time period during which the log is read, at the end of this period the reading stops and commands are executed (ms).

х32: (х32)\Perco
x64: (х64)\Perco

SendLevelBeforePerson

0, 1

0

4.7.4 and later

Defines whether to send the access level after sending person to controller or not.

х32: (х32)\Perco
x64: (х64)\Perco

ShowSendLevel

0, 1

0

4.7.4 and later

Defines whether the Send access levels button is shown for Perco object in Intellect settings or not:
0 - disabled (by default);
1 – enabled.

х32: (х32)\Perco
x64: (х64)\Perco

Show_progress

0, 1

0

4.7.4 and later

Defines whether to show progress bar when forwarding configuration or not.

х32: (х32)\Perco
x64: (х64)\Perco

TimeOut

-

-

4.7.4 and later

Set the gateway query timeout.

х32: (х32)\Perco
x64: (х64)\Perco

VerifyLogMesDB

-

-

-

The key is not in use.

Rubeg

х32: (х32)\RUBEG8_ISB
x64: (х64)\RUBEG8_ISB

ConvertUserBcpToUserIntellect

0, 1

0

4.7.4 and later

Defines whether to allow Rubeg users to access Intellect or not:
0 - forbid importing Rubeg users to Intellect;
1 - allow importing Rubeg users to Intellect.

х32: (х32)\RUBEG8_ISB
x64: (х64)\RUBEG8_ISB

ShowError

0, 1

0

4.7.4 and later

Defines whether to show dialog boxes with Rubeg COM server errors:
0  - forbid displaying dialog boxes;
1 - allow displaying dialog boxes.

х32: (х32)\RUBEG8_ISB
x64: (х64)\RUBEG8_ISB

UseThreadDynamicProcess

0, 1

1

4.7.5 and later

Sets the thread for forwarding user configuration:
0 - forwarding in the primary thread;
1 - forwarding in the secondary thread.

х32: (х32)\RUBEG8_ISB
x64: (х64)\RUBEG8_ISB

1 - algorithm of correction of duplicated users is in use;
0 - algorithm of correction of duplicated users is not in use.

NAC-501/W6500.CNT ACS controller

х32: (х32)\Nac\Dll
x64: (х64)\Nac\Dll

delay

> = 1

1

4.7.4 and later

Delay (ms) when sending users between them. Default - 1 (no delay).

х32: (х32)\Nac
x64: (х64)\Nac

Delay green led

> = 0

0

4.7.4 and later

Defines how much time (ms) the reader (NAC51P only) is excluded from the query after receiving the event.

х32: (х32)\Nac
x64: (х64)\Nac

Delay open door

> = 0

500

4.7.4 and later

Defines how much time (ms) the reader (NAC51P only) is excluded from the query after authorized access.

х32: (х32)\Nac
x64: (х64)\Nac

Delay prohibited access

> = 0

250

4.7.4 and later

Defines how much time (ms) the reader (NAC51P only) is excluded from the query after enabling the prohibited access mode.

х32: (х32)\Nac
x64: (х64)\Nac

Delay red led

> = 0

250

4.7.4 and later

Defines how much time (ms) the reader (NAC51P only) is excluded from the query after prohibiting access.

х32: (х32)\Nac
x64: (х64)\Nac

enable_thread

1

1

4.7.4 and later

Checkbox of forwarding configuration in a separate thread; the value is always 1 (do not modify). The key is out of date.

х32: (х32)\Nac
x64: (х64)\Nac

fqLinkSet

> = 0

1000

Defines the rate (ms) of attempts to connect the reader if there is no connection.

х32: (х32)\Nac
x64: (х64)\Nac

FlagsLog

0x01 - erroneous file recording/reading
0x02 - sent commands
0x04 - poll
0x08 - erroneous answers to sent commands
0x10 - erroneous answers to poll commands
0x20 - the reader is occupied, repeat is in nn ms
0x40 - card status confirmation
0x80 - master card is shown
0x100 - door open/close
0x200 - TIMEOUT

0x02F9

4.7.4 and later

Sets bit values for logging to log file (what to log).

х32: (х32)\Nac\Dll
x64: (х64)\Nac\Dll

show_progress

0, 1

1

4.7.4 and later

Defines whether to show the progress when forwarding the configuration.

SATEL FAS ACS

х32: (х32)\Satel
x64: (х64)\Satel

Get_Outputs

0, 1

1

4.7.4 and later

1 - Allow getting relay states;
0 - Forbid getting relay states.

х32: (х32)\Satel
x64: (х64)\Satel

Get_Troubles

0, 1

1

4.7.4 and later

1 - Allow getting states of troubles;
0 - Forbid getting states of troubles.

х32: (х32)\Satel
x64: (х64)\Satel

Timeout

Any positive number

300

4.7.4 and later

Timeout of getting next message byte from the controller, ms.

х32: (х32)\Satel
x64: (х64)\Satel

Transmit_Cmd_Timeout

Any positive number or 0 to forbid receiving states

1000

4.7.4 and later

Rate of getting states (relay and troubles) in ms.

х32: (х32)\Satel
x64: (х64)\Satel

Verify_Link_Timeout

Any positive number

500

4.7.4 and later

Max. waiting time (ms) of getting an event from controller.
If the value is exceeded, then module considers that there is no connection with controller.

х32: (х32)\nc

х64: (х64)\nc

х32: (х32)\nc

х64: (х64)\nc

х32: (х32)\nc

х64: (х64)\nc

х32: (х32)\nc

х64: (х64)\nc

х32: (х32)\nc

х64: (х64)\nc

VMS (Visitor Management System)

х32: (х32)\id_limit
x64: (х64)\id_limit

PERSON_MINID

1-99999

-

4.7.6 and later

These keys are created to generate disjoint IDs of objects on different computers.
PERSON_MINID - PERSON_MAXID – allowed range of user IDs to edit access control service.
If PERSON_Restrict = 0, then keys are not active.

х32: (х32)\

x64: (х64)\

Note. If this section has not been created, then the system will look for the key in the section.

HKEY_CURRENT_USER\Software\ITV\INTELLECT\

In ACFA 5.4 and later versions it is possible to delete irrelevant photos in the Photo identification module: when the Photo identification module gets an event and if there is no photo on the Server that gets the event, then this photo is considered irrelevant and the clients connected to the Server get a command to delete the photo.

They key allows keeping irrelevant photos on the computer where the key value is 1.

0 – delete irrelevant photos on the computer.

1 – do not delete irrelevant photos on the computer.

AUTO Intellect

Registry section

Available values

Default

Product version

Parameter in effect

х32: (х32)\LPRVIEWER
x64: (х64)\LPRVIEWER

protocollimit

<1000

-

4.7.5 and later

Sets number of lines shown in the protocol (this parameter is for testing only).

х32: (х32)\radar
x64: (х64)\radar

EmulateRefreshSpeed

1 - 2147483647

100

4.7.5 and later

Radar emulator. Sets time period (ms) for refreshing data about speed in the radar emulation mode. 0 value blocks data refreshing.

х32: (х32)\radar
x64: (х64)\radar

WriteSpeedOnTitles

0, 1

0

4.7.5 and later

Defines whether to write speed values on titles.

х32: (х32)\URMLPR
x64: (х64)\URMLPR

DisableUrmOutput

0, 1

0

4.7.5 and later

Disables results output.

х32: (х32)\URMLPR
x64: (х64)\URMLPR

GlobalUrmDebug

0, 1

0

4.7.5 and later

Enables displaying CZoneInfo objects in dbgview. 

х32: (х32)\URMLPR
x64: (х64)\URMLPR

OneSpeedDetect

0, 1

0

4.7.5 and later

Enables filtering the radar speed values.

х32: (х32)\URMLPR
x64: (х64)\URMLPR

ReadSpeedFromTitles

0, 1

0

4.7.5 and later

Defines whether to read speed from titles or not.

х32: (х32)\URMLPR
x64: (х64)\URMLPR

TestWidth

-

0

4.7.5 and later

 Image width change (internal use only).

х32: (х32)\URMLPR
x64: (х64)\URMLPR

TestHeight

-

0

4.7.5 and later

 Image height change (internal use only).

х32: (х32)\URMLPR
x64: (х64)\URMLPR

Time

-

-

4.7.5 and later

Saves time of the last viewed archive fragment in the test mode.

х32: (х32)\URMLPR
x64: (х64)\URMLPR

UrmDebug

0, 1

0

4.7.5 and later

Enables recording of  tiff files to UrmDebug folder.

х32: (х32)\URMLPR
x64: (х64)\URMLPR

UrmSendProcessEvents

0, 1

0

4.7.5 and later

Sends beginning (VEHICLES_BEGIN) and ending (VEHICLES_END) parameters of license plate recognition to the core.

х32: (х32)\URMLPR
x64: (х64)\URMLPR

UseTry

0, 1

0

4.7.5 and later

Enables the seh module.

х32: (х32)\URMLPR
x64: (х64)\URMLPR

WriteUraganErrorBuf

0, 1

0

4.7.5 and later

If failure occurs, the uragan.buf file is created (only of UseTry=1). 

х32: (х32)\URMLPR\UnitTest
x64: (х64)\URMLPR\UnitTest

CountryName

Text

RUS

4.7.5 and later

Sets the test country name.

х32: (х32)\URMLPR\UnitTest
x64: (х64)\URMLPR\UnitTest

Enabled

0, 1

0

4.7.5 and later

Enables/disables test.

х32: (х32)\URMLPR\UnitTest
x64: (х64)\URMLPR\UnitTest

ExecuteSecond

> = 0

3

4.7.5 and later

Sets time of test execution.

х32: (х32)\URMLPR\UnitTest
x64: (х64)\URMLPR\UnitTest

Number

Текст

M038EH150

4.7.5 and later

Sets the test number.

х32: (х32)\URMLPR\UnitTest
x64: (х64)\URMLPR\UnitTest

PlateHeightPercent

> 0

15

4.7.5 and later

Sets the test license plate height.

х32: (х32)\URMLPR\UnitTest
x64: (х64)\URMLPR\UnitTest

PlateWidthPercent

> 0

25

Sets the test license plate width.

х32: (х32)\URMLPR
x64: (х64)\URMLPR

ParkingMode

0, 1

-

5.0

Enabling the parking mode for  recognizer:

1 – parking mode is enabled. Recognition starts at ULPR|START reaction. As soon as one license plate is recognized, the recognition stops.

0 – parking mode is disabled. Recognition continues till getting the ULPR|STOP reaction. 

Important! For correct operation of the key make sure that the Enable on motion detection trigger checkbox is set on the settings panel of the LPR channel object corresponding to the CARMEN-parking recognition module (see Setting the joint operation of the LPR channel and the motion detector of the Intellect platform).

Note. The ULPR|START and ULPR|STOP reactions are created using the scripts. Operator command, sensor triggering, motion detection tool triggering, etc. can cause the reaction.

х32: (х32)\URMLPR
x64: (х64)\URMLPR

When value = 1, the key allows saving frames transmitted from Intellect to the CARMEN Parking / CARMEN-Auto module.

• For CARMEN Parking the frames are saved to the following folders:
  < Intellect installation folder>\Modules\CPD_RawResults\idDetector\ - frames with data for recognition.
  <Intellect installation folder >\Modules\CPD_RawResults\idDetector\NotFound – frames with no data for recognition.If value = 0, then frames are not saved.

• For CARMEN Auto the results are stored to the <Intellect>\Modules\CarmenResults\idDetector\ folder. The results are represented by pairs of files: ‘<recognition time in UTC format>.bmp’ file (with a frame to be recognized) and xml file with settings of the recognizer and recognition results.

• If the module is restarted, the Apply button is clicked or 5000 files are saved, then the specified folder and the data in it are automatically deleted and the folder is recreated. 

When value = 1, frames are not saved.

х32: (х32)\URMLPR
x64: (х64)\URMLPR

х32: (х32)\URMLPR
x64: (х64)\URMLPR

х32: (х32)\URMLPR
x64: (х64)\URMLPR

Sets time (in milliseconds) corresponding to the delay with which events about green/red traffic lights are received.

х32: (х32)\URMLPR
x64: (х64)\URMLPR

х32: (х32)\Video\Defragmentation
x64: (х64)\Video\Defragmentation

IntervalMinutes

> = 0

60

1.0.2 and later

Sets interval (min) between iterations of disk defragmentation.

х32: (х32)\Video\Defragmentation
x64: (х64)\Video\Defragmentation

IntervalOnStartMinutes

> = 0

60

1.0.2 and later

Sets interval (min) from system start to the first iteration of disk defragmentation.

х32: (х32)\Video\Defragmentation
x64: (х64)\Video\Defragmentation

MaxFileFragmentsAllowed

> = 0

10

1.0.2 and later

Defines the *.db3 file fragmentation threshold on the disk. It is calculated as a sum of fragments of idx.db3 and detectorevent.db3 files (log file is not taken into account). If after *.db3 files defragmentation the total number of fragments on the disk is greater than the threshold value, then the disk is defragmented. 

х32: (х32)\Video\Defragmentation
x64: (х64)\Video\Defragmentation

ModeForFull

0 - 10

4

1.0.4 and later

Sets the mode to defragment files with *.db3 mask.

х32: (х32)\Video\Defragmentation
x64: (х64)\Video\Defragmentation

Mode

0-10

2

1.0.4 and later

0 - Analyze only, do not defragment or optimize.
1 - Analyze and modify, do not optimize. 
2 - Analyze, modify and do quick defragmentation. 
3 - Not recommended.  Analyze, modify and optimize.
4 - Analyze and speed up at the same time.
5 - Analyze and go to the end of the disk.
6 - Analyze and sort files according to their name.
7 - Analyze and sort files according to their size (in ascending order).
8 - Analyze and sort files according to access time (starting from the latest). 
9 - Analyze and sort files according to modification time (starting from the oldest). 
10 - Analyze and sort files according to creation time (starting from the oldest).

х32: (х32)\Video\Defragmentation
x64: (х64)\Video\Defragmentation

ModeForPartial

0-10

3

1.0.4 and later

Sets the mode in which disk defragmentation starts.

х32: (х32)\Video\Defragmentation
x64: (х64)\Video\Defragmentation

FreeSpace

0 - 10

1

1.0.4

Sets free space on the disk (% from the total space).

х32: (х32)\Video\Defragmentation
x64: (х64)\Video\Defragmentation

Speed

0 - 100

3

1.0.4 and later

Sets the defragmentation speed (%).

х32: (х32)\Video\Defragmentation
x64: (х64)\Video\Defragmentation

ThreadPriority

0 - THREAD_PRIORITY_LOWEST
1 - THREAD_PRIORITY_BELOW_NORMAL
2 - THREAD_PRIORITY_NORMAL
3- THREAD_PRIORITY_ABOVE_NORMAL

0

1.0.4 and later

Sets the defragmentation priority.

х32: (х32)\Debug
x64: (х64)\Debug

Module name

-

-

1.0.4 and later

Specifies the module for which messages will be filtered in the log file.

For instance, if log files are to be filtered for video.exe process, then the folder is to have SOFTWARE\ITV\INTELLECT\Debug\ video.exe name.

х32: (х32)\Debug
x64: (х64)\Debug

Filter

Text

-

1.0.4 and later

Specifies an alphabetic word or word-combination that is to be in the message.

х32: (х32)\LMCGate
x64: (х64)\LMCGate

SmartSearch

0, 1

1

up to 4.8.0

Defines whether forensic search is enabled or disabled:
0 – forensic search is  disabled;
1- forensic search is enabled.

х32: (х32)\Video
x64: (х64)\Video

scene

0, 1

1

1.0.5 SP1

Defines whether there is a scene in the configuration. 

х32: (х32)\Video
x64: (х64)\Video

momentquest

0, 1

1

1.0.5 SP1

MomentQuest application (0 – feature is disabled).