Page History

...

1. Select the input address from the Number drop-down list (1).
2. Set the Configured checkbox if the input is in working state (2).
3. Set the Tamper is normally opened checkbox if it's required to receive alarm events while breaking or opening the sensor housing (3).
4. Set the Sensor is normally opened checkbox if it's required that input is to be in normal state (not alarm) while opened contacts (4).
5. To require disarming of input set the corresponding checkbox (5).
6. In the Delay for entrance field enter the value in seconds defining time for input disarming (6).
7. In the Delay for exit field enter the value in seconds defining time period during which the object can exit after the input arming (7).
8. From the Mask by time zone drop-down list select the time zone during which events won't be generated for the input (8).

9. If necessary, assign the input with a term of an internal variable (9, see Associating AIO input with a term).

10. Click the Apply button.

The AIO input is now configured.