Page History

...

The operator protocol interface is shown in the following figures.
The operator protocol interface. The Current events tab:
Image Modified

The operator protocol interface. The Search in events archive tab:

Image Modified

The operator protocol interface. The Create report tab:

Image Modified

The operator protocol interface. The Create Event tab:

Image Modified

Interface elements of the operator protocol are described below.

The Current events tab

The event control panel is at the top of the Current events tab. The following elements can be found on this panel:

1. The button to switch to the archive to view and export video of the event Image Added.

2. The button to switch to the map layer where there is the source of the even Image Added.

3. The button to escalate the event Image Added.

frame of alarm moment:
Image Removed

4. Information about an event:

   Image Removed

   • system name of the event;
   • object logged the event;
   • time left before assigning the "non-processed event" type to the event or before event escalation;
   • date and time of event logging;
   • name of the Part object corresponding to the area where the event is logged;
   • information about event escalation.
5. The field for a comment:
   Image Removed

6. Enabling the Image Removed checkbox, the type assigned to the corresponding event is applied to all events in the Current events tab

7. The buttons of assigning the type (status) to the event. Image Removed

   Info
   title Note.
   If the event has got the "Escalate" Escalated status, then it is this event will be displayed in the interface of the operator protocol of a the higher level. If there is no "Escalate" button, then there is Escalation button it means that no superior interface for the current operator protocol.is assigned to the current Operator.

   Several superior interfaces can be assigned to the Operator protocol but escalation is performed to one of them. If more than one superior interfaces is assigned, then before clicking the Escalation button select the required Operator protocol of the higher level in the dropdown list that can be found below the Escalation button.

8. The buttons to assign the type (status) to the event Image Added.

9. The Image Added button enables delaying

   The Image Removed button allows postponing the

   event processing once for

   the

   a time period specified when configuring the Operator protocol.

    

   Optional parameters. Image Removed

   Info
   title Note.
   The list of optional parameters is set in the settings of the Operator protocol object (see Intellect software package. Administrator guide)

10. The field to enter a comment:

    Image Added

11. When enabling the Image Addedcheckbox, the type assigned to the corresponding event is applied to all events in the Current events tab.

12. The Image Added checkbox is used for auto creation of the bookmark in the archive when the event is processed by the operator. The entered comment will be used as the bookmark name.

There are cells corresponding to the events at the bottom of the Current events tab. The number of horizontal cells is determined by the Operator protocol window width.The information on the event and the frame from the camera linked to the object from which the event is received are displayed in the cell (see Connection of objects with cameras in Administrator’s Guide):

Image Added

1. system name of the event;
2. object registered the event;
3. name of the Region object corresponding to the area where the event is registered;
4. date and time of event registration;
5. time left before the Non-processed event type is assigned to the event;

6. information about event escalation or optional parameters.

   Info
   title Note
   The list of optional parameters is set when configuring the Operator protocol object (see Administrator’s Guide).

7. The button of going to the archive to view and export video of the event Image Removed
8. The button of going to the map layer where the source of event is Image Removed

The Search in events archive tab

1. Selection list of department to which operator belongs Image RemovedImage Added The list to select the department which the operator belongs to. If the field is empty, than all operators are available for choiceto select.

    

2. Image Added The list

   of selecting the operator Image Removed
   
3. The list of selecting the object Image Removed
4. The button of setting the initial date Image Removed

5. to select the operator.

6. Select the region the object corresponds to:

   Image Added

7. Enabling the filter by objects and object selection:

   The button of setting the final date Image Modified
8. The types of events by which the search is performed by:
   Image Removed
   Image Added
   
9.  The button to set the initial date Image Added.
10. The button to set the final date Image Added.
11. The button of search start Image Removedstart Image Added.
12. The button of going to switch to the archive to view and export video of the event Image Removedevent Image Added.

There is the protocol table containing the search data results at the bottom of the Search in events archive tab.

Image RemovedImage Added

The description of the protocol table is given in the table.below:

...

1. The list of objects by the events from which the report can be created:
   Image RemovedImage Added
   
2. The list of events by which the report can be created:
   Image RemovedImage Added
   
3.  The button of setting the date after which events get into the report Image Removedreport Image Added.
4. The button of setting the date after which events do not get into the report Image Removedthe report Image Added.
5. The Image Added checkbox enables displaying an event in the report only once. If this checkbox is set unchecked, then one event will be displayed for each Operator protocol in the report.
6. The button of creating a report Image RemovedThe button to create a report Image Added.
   

The Create event tab

1. The field for description of the event:
   Image Removed Image Added.
   
2. The button of setting the date and time of the event Image RemovedImage Added.
3. Dropdown The dropdown list to select the data source typetype Image Added. Image Removed
4. The drop-down list for selecting dropdown list to select the source object of the event Image RemovedImage Added.
5. The button of creating to create an event Image RemovedImage Added.