Go to documentation repository
Page History
In the Intellect software it is possible to use modules specialized for working in 32-bits and 64-bits OS. Video.run and vmdadb.run modules, coderscodecs, part of IP-cameras and video capture cards drivers are converted to the 64-bits platform.
Modules specialized for working on the 64-bits system allow removing restrictions on the number of connected and simultaneously displayed video channels in the Intellect software. Using of 64-bits modules allows the system performance improvement until up to 10 % comparing with 32-bits modules.
Info | ||
---|---|---|
| ||
If the 64-bit versions of the following modules are not available in use, the following Intellect functionality does not work:
|
Info | ||
---|---|---|
| ||
Some modules of Intellect and vertical solutions support operation in 64-bit mode only:
|
By default, modules for 32-bit system are loaded in Intellect versions up to 4.10.2 inclusive. Starting with version 4.10.3, 64-bit modules are loaded by default, and if there is no corresponding bit module, then a 32-bit module is started.
Using of 64-bits bit system is recommended in the following ways:
- if the large number of cameras are to be displayed simultaneously (over 100 cameras);
- if the large number of cameras are to be displayed in the ultrahigh resolution (over 50 cameras with 5Mpxls resolution in format without local unpacking);
- if the large number of channels of forensic detections with search are to be in use (over 25 Tracker objects on the Server when video resolution is higher than 800х600).
Info | ||
---|---|---|
| ||
There is no 64-x bits bit decoder for WS7 and WS17 cards with hardware compression. So video from these cards is not displayed on the remote client when 64-x bits bit modules are in use. |
Info | ||
---|---|---|
| ||
The Auto-Uragan license plate recognition module integrated in the Auto - Intellect software package does not support 64-bits bit operation mode. So if the Uragan Module object is created in the Intellect object tree, 32-bits modules will run regardless of the set Run x64 modules checkbox. |
To use the 64-bits bit modules do the following:
- Go to the settings panel of the Computer object (1).
- Set the Run x64 modules checkbox (2).
- Click the Apply button (3).
- Restart the Restart Intellect software.
As a result modules specialized for 64-bits bit OS will be loaded. If the 64-bits bit module is not found, the corresponding 32-bits bit module will be loaded.
Configuring of using 64-bits bit module is completed.