Page History

The list of cameras specified in the configuration panel for the Partition Of Control object defines the cameras whose archives can be accessed through the Search in Archive interface object (see the document Monitoring Software Package: Operator's Guide). In addition, this list defines the cameras whose state and archives are monitored by Agent of Control.

...

1. Go to the configuration panel for the Partition Of Control object.
   
2. Click the Cameras... button. The Add/edit cameras window opens.
   
3. Configure the necessary cameras by clicking the  and  buttons to move cameras from the left list to the one on the right (1).
4. Select cameras in the list on the right.
5. Specify the time for video archive storage, in days (2).
6. Click the Set for cameras selected in the right list button (3).
7. Repeat steps 4 to 6 for all necessary cameras.

8. Set the archive tracking time period (4): For all time or Over period (days). When Over period (days) is selected, the (5) field is enabled to specify the number of days.

   Info
   title Note.
   If For all time is selected, the algorithm of decision-making on an alarm for all time is used, even when the video archive is empty. If Over period (days) is selected, the value entered in field (5) must be greater than or equal to the archive storage time + 1 day. To take into account the regular voids in the archive, the number of days in the tracking period should be increased by the maximum number of days of regular voids during the archive storage.

   
   

9. Click the Apply changes and close button (46). The selected cameras will be added to the list on the configuration panel of the Partition of Control object.
10. Click the Apply button.

...