Unable to render embedded object: File (books.jpg) not found.
Go to documentation repository
Page History
...
Element name | Element description | Element content | Element attribute | Attribute description | Value range |
InputPortType | POS-terminal data transfer protocol | Protocol name | - | - | RS232 – data transfer via COM-port UDP – data transfer using UDP TCP – data transfer using TCP/IP TCPCLIENT - data transfer using TCP/IP from remote Server |
ServerPort | Local port number, if InputPortType is TCP or UDP | Whole positive numbers | - | - | From 0 to 65535 |
MultiCast | Enables the function of receiving multicast messages | - | - | - | True – function of multicast messages receiving is enabled False – function of multicast messages receiving is disabled |
| MultiCastIP | Address to which multicast messages from external POS program will be sent in case of the UDP interface is selected in InputPortType parameter | - | - | - | IP address to which the multicast messages sending is performed |
ProtocolName | Current data transfer protocol from the POS-terminal | Protocol name | - | - | Depends on the number of plug-ins linked to MixForward |
LogFileMaxSize | Maximum log file size, bytes | Whole positive numbers | - | - | - |
| LogInput | Enables or disables the received data log | - | - | - | true - the log is enabled false - the log is disabled |
| PingTime | The period of test package sending in seconds | - | - | - | Up to 60 seconds |
RS232_settings | COM-port settings if InputPortType is RS-232 | -
| PortName | Available COM-port name | Depends on the number of available ports |
BaudRate | Supported bit rate, bit/s | Depends on the number of supported bit rates | |||
RtsEnable | Enable RTS option | 0 – do not use RTS control signal 1 – use RTS control signal | |||
DtrEnable | Enable DTR option | 0 – do not use DTR control signal 1 – use DTR control signal | |||
MSMQ_settings | MSMQ settings if InputPortType is MSMQ | ReconnectTimeout | The time after which an attempt is made to restore connection, if messages are not received | Up to 60 seconds | |
| NoTimeFilter | Enables or disables messages filtering by time | true - messages are filtered by time | |||
| DeleteMessages | Enables or disables message deletion after they are read | true - messages are deleted | |||
| Queue Path | Path to the queue | - | |||
| Terminal | Number of the terminal that is inserted for the specified queue | - | |||
forwards | Sets the correspondence between the routing id and POS-server IP-address/port | - | ip | POS-server IP-address | Depends on the POS-server network settings |
port | POS-server port | Depends on the POS-terminal object settings | |||
id | Routing id | Depends on the routing id value in the data package. If the id=”*”, then data from all POS-terminals is redirected to the POS-server | |||
| Info | ||
|---|---|---|
| ||
If the events come in from several objects, the correspondence between the routing id and POS-server IP-address/port should be set for each of these objects. See the example below. |
| Note | ||
|---|---|---|
| ||
| If the routing id of a package has no match in the utility configuration file, and the id=”*” is not set, the package is deleted. |
...
Overview
Content Tools