Page History

...

1. From the Type of controller: drop drop-down list select the type of AAN controller (AAN-32 or AAN-100) depending on the type of hardware being used (1).
   
2. In the Time of confirmation by operator: field  field enter the time period in seconds for operator to make a decision to grant or deny access (2).
3. In the Time of escort card presentation: field  field enter the time period in seconds between the presentation of the first and second access cards which, if exceeded, will result in access not being granted (3).
4. From the PIN drop-down list select the length of PIN-code being used. Select the Do not use value if it's not required to use PIN-code (4).

5. Set the corresponding checkboxes if it's required to use additional 6 (5) or 32 (6) access levels.

   Note
   title Attention!
   Maximum The maximum number of users storing that can be stored in controller memory decreases while using if the additional access levels are used.

   
   

6. To configure antipassback set the Use APB checkbox (7). To configure global antipassback regardless of number of AAN controllers, do the following:
   1. Create the regions in the Intellect software package.
   2. Assign the regions to the readers.
   3. Match the region number of region in the AAN controller to with each region in the Intellect software.

7. Set the Use access with escort checkbox (8) if it is necessary to confirm the access to the zone with the escort card.

8. In the Maximum number of cards: field  field enter the maximum number of access cards that will be stored in the controller's memory (9).

   Info
   title Note.
   The maximum number of access cards that can be stored in the controller's memory depends on the number of memory cards installed in on it.

   
   

9. Click the Request time button (10) to request the AAN controller time.
10. Click the Synchronize time button (11) to synchronize the AAN controller time with the computer time.
11. Click the Apply button (12).

The AAN controller is now configured.