Page History

...

1. Make sure that the power of computer is off.

2. Connect the 4/4 Sensor-Relay (low profile) card to the video capture card with the help of loop bundled with the distribution kit. The loop is connected to J2 and J3 connectors (see the figures below and Appendix 5. Video capture cards pins section).

   Info
   title Note
   The loop is to be connected to the first row of J2 connectors. One of the outers is marked red in the figures. The 4/4 Sensor-Relay card (low profile) can be connected to SC590N4 video capture card both to the first and the second row of J2 connectors.

   The figure showing the 4/4 Sensor-Relay (low profile) card connection to SC200Q4 Low profile (FS115) card:

   

   The figure showing the 4/4 Sensor-Relay (low profile) card connection to SC300Q16to SC330Q16, SC300Q16/SC300D16, /SC310N16 (FX4/8/16) cards:
   Image Modified
   The figure showing the 4/4 Sensor-Relay (low profile) card connection to SC3B0N16 (WS216) card:

   
   The figure showing the 4/4 Sensor-Relay (low profile) card connection to SC590N4 card:

   

   Info
   title Note.
   SC590N4 card supports up to 8 sensors and 8 relays as two 4/4 Sensor-Relay (low profile) cards can be connected to the J2 connector simultaneously.

   The figure showing the 4/4 Sensor-Relay (low profile) card connection to SC230N4 card:

   

3. Connect the cable of computer PSU (disk drive power supply) to J4 connector of the 4/4 Sensor-Relay (low profile) card.
4. Install the card into vacant computer slot and fix it in the casing with the help of screw.
5. To connect Sensor-Relay, unsolder the connector. Unsoldering is made in accordance with the external connector pinout of the 4/4 Sensor-Relay (low profile) card.
   
6. Connect the ready-for-use connector to external connector of the 4/4 Sensor-Relay (low profile) card in order to connect sensors and relays to the Server.

...