Page History

To configure the BACnet channel parameters of BACnet channels, do the following:

1. Create a Go to the Bacnet Propertyobject  object settings panel, which is created on the basis of the selected the Bacnet Object (1) object.
   Image RemovedImage Added
2. From the Property Type drop-down list : (1) select the type of the parameter that will be sent and stored on the device (2).

3. From the Value Type drop-down list: list (2) select the data type tha will be used to send and store the parameter on the device (3).

4. In the Value field: field (3) specify the default value of the parameter (4). Check the Subscribe box in order to add the parameter to the change of value monitoring list of the BACnet device (5).

5. From the Rule drop-down

   list:

   list (4) select the rule for processing parameter values. For details on rules configuration, see Configuring the rules for BACnet parameters

   (6)

   .

6. From the Icons drop-down list: list (5) select the icons preset that will be used to indicate the parameter on the map. For details, see Working with channels and BACnet parameters on the map (7). 
7. Click the Apply button (86).Repeat steps 1-8 for all required channels and parameters

Configuring the BACnet channel parameters is complete.