Versions Compared

Old Version 5

changes.mady.by.user Roman Nazarov

Saved on

compared with

New Version 6

changes.mady.by.user Gleb Matskevich

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Forteza two-position sensor is controlled in the Map interactive box using the function menu of the Forteza two-position sensor object.

Info
titleNote

To set up the Forteza two-position sensor object, it is recommended to use the Text display type on the map.

Find description of function menu commands of the Forteza onetwo-position sensor objects  object in the table.

Sets operation threshold

Function menu command

Executed function

Switch mode

Sequentially switches the sensor operation modes.

The following modes are available for the Forteza sensors:

  • Duty mode
Switches sensor to the mode of threshold configuring
Handle alarmsConfirmation of alarm by Operator (the alarm displays on Map until confirmation)
ArmArms sensor
MIR settingsOpens a dialog box with commands available for MIR device
DisarmDisarms sensor
Threshold
  • - displays the interference level
  • Adjustment - displays the signal level
  • Thresholds - displays the current threshold value

The following modes are available for the MIR sensors:

  • Duty mode - displays the interference level

  • IR adjustment - displays the signal level of the infrared channels

  • RB adjustment - displays the signal level of the radio ray (radio beam) channels

  • Thresholds - displays the current threshold value
Handle alarmsAlarm confirmation by the operator
ArmArms the sensor
SettingsOpens the sensor configuration window
DisarmDisarms the sensor
Change threshold

Sequentially switches the trigger threshold in the range from 0.25V to 1V and the 0.1V interval

Functions available in the Settings menu:

Image Added

Note
titleAttention!

Adjusting and setting the threshold values for sensors should be performed in accordance with the manufacturer's technical documentation.


Info
titleNote.

The MIR device's mode can be changed only via the MIR settings command. The Duty mode and Threshold commands are not intended for the MIR device.

Functions available for the MIR device in the MIR settings dialog box are:

After the adjustment is made and the threshold values are set, the sensors should be switched to the duty mode and the Period of indicator updating parameter value should be set to Do not use. These actions will improve the general responsiveness of the system (see Configuring Forteza two-position sensor).

...