Page History

x32: (X32)\Audio
x64: (x64)\Audio

Gain_control

0, 1, 2

-

up to  4.7.6

Sets the volume control parameter: 

0 - no volume control;
1 - integer processing (less accurate, but faster);

2 - extra accuracy (CPU overload is possible if there are a lot of channels).

x32: (X32)\Audio
x64: (x64)\Audio

Max_file_len_sec

 > = 0

 600

4.7.4 and later

Defines max. length of audio file (sec) when recording via audio player.

x32: (X32)\Audio\
Card\ «Card Name»
x64: (x64)\Audio\Card\ «Card Name»

mix

0, 1

0

4.7.4 and later

Sets input mixing.

0 – logging is disabled.

1 or other value different from 0 – streams logging is enabled.

x32: (x32)
x64: (x64)

ChangePort

> = 0

Depends on the port specified for the Client.

4.7.3 and later

Allows changing the port number. For instance, if it is necessary to change port 20900 to 40900, then 20900="40900" string parameter is created.
The change of this parameter can affect the system.

x32: (x32)
x64: (x64)

CheckPingPeriod

> 0

 10

4.7.4 to 4.10.2

Sets Server-computer ping period.

Note. In Intellect since version 4.10.3 this parameter is set on the settings panel of the Security zone object.

x32: (x32)
x64: (x64)

CheckVersion

0, 1

0

4.7.4 and later

Sets the parameters of Server connection: the version is checked in connected version parameters. If versions do not agree, then there is a corresponding message and no connection.

x32: (x32)
x64: (x64)

Core IP Address

IP address

 -

4.7.3 and later 

Address of the computer to the core of which the slave.exe is to connect.

x32: (x32)
x64: (x64)

DBAttempts

1..∞

 10

4.7.3 and later

Number of attempts to connect to database.

x32: (x32)\Debug
x64: (x64)\Debug

DebugLevel

0,1,2,3,4

0

4.7.3 and later

Sets the debug mode:
0 – disabled;

1 – information is shown in the process window;

2 – information is shown in the process window and logged;

3 – extended log is written – it contains module events;

4 – extended log is written – it contains module events and parameters.

x32: (x32)\Debug
x64: (x64)\Debug

DebugExtension

Any string

LOG

4.7.3 and later

Sets extensions of log files.

x32: (x32)\Debug
x64: (x64)\Debug

DebugFlushPeriod

> = 0

500

4.7.4 and later

Sets the update rate for log files (ms).

x32: (x32)\Debug
x64: (x64)\Debug

DebugOptions

Range in decimalsystem: 0-255. 

0x001 (i.e. 1)

4.7.3 and later

Hexadecimal logging in the debug mode. This parameter has a complex structure (bit mask) and it is modified using the Tweaki.exe utility.

x32: (x32)\Debug
x64: (x64)\Debug

DebugQueueMaxLines

0 - 2147483647

2000

4.7.4 and later

Specifies max. number of messages in a queue to log file. If there are more than 500 log lines in the queue, then they are to be scaled.

x32: (x32)\Debug
x64: (x64)\Debug

DebugSize

>=100

100

4.7.3 and later

Specifies the number of megabytes provided for log. Restricted by disk capacity.

x32: (x32)\Debug
x64: (x64)\Debug

DebugTime

 0-2147483647

48

4.7.3 and later

Specifies the number of hours for keeping log files.

x32: (x32)
x64: (x64)

defaultconnection

 0, 1

1

4.7.4 and later

Allows setting connections in the architecture only with the computer where the Computer object is created.

x32: (x32)
x64: (x64)

DisableProtocol

0, 1

0

4.7.3 and later

Allows disabling protocol.

x32: (x32)
x64: (x64)

DisableThreadStatQueue

0, 1

0

4.8.0 and later

By default the key is not created.

Defines whether the queue statistics is called or not. If the registry key value=1, then the box can not be called.

To call the Queue statistics box, follow the steps:

x32: (x32)
x64: (x64)

InstallFolder

Intellect

4.7.3 and later

Specifies the installation folder.

x32: (x32)
x64: (x64)

Ip_port

0, 1

up to  4.7.6

Specifies the port using which the IP camera will operate on the Computer object.

x32: (x32)
x64: (x64)

Language

0x0419

-

4.7.3 and later

Specifies the language to use (0x0419 - English). 

x32: (x32)
x64: (x64)

LogIncommingMsg

0, 1

not created

up to  4.8.0

Defines whether logging of incoming events is enabled or not.

x32: (x32)
x64: (x64)

LogOutgoingMsg

0, 1

not created

up to  4.8.0

Defines whether logging of outgoing events is enabled or not.

x32: (x32)
x64: (x64)

LogStatistics

0, 1

not created

up to  4.8.0

Defines whether the statistics is logged or not.

x32: (x32)
x64: (x64)

OnlyLocalProtocol

0, 1

0

4.7.3 and later

Only local events are logged.

x32: (x32)
x64: (x64)

PeakWorkingSetSizeQuota

>=0

0

4.8.1 and later

Sets RAM limit (MB). When this limit is exceeded, the module that exceeded this limit will be restarted in the restart service.

x32: (x32)
x64: (x64)

PhotoCores

Name or IP address 

-

4.7.3 and later

The list of computers (cores) for mailing user photos.

x32: (x32)
x64: (x64)

PriorityClass

256,

128,

32768,

32,

16384,

64

 16384

4.7.3 and later

Defines the stream priority:

256 - realtime

128 - high

32768 - Above Normal

32 - normal

16384 - below Normal

64 - low

x32: (x32)
x64: (x64)

ShowCrashMessage

0, 1

0

4.7.5 and later

Create or not the module crash message. 

x32: (x32)
x64: (x64)

SyncTime

0, 1

0

Defines whether to synchronize time between computers or not.

x32: (x32)
x64: (x64)

Topmost

0, 1

1

4.7.4 and later

Sets the splash screen location:
1 - splash screen is topmost;
0 - screen is hidden behind other windows.

This key is applied for splash screen on the Server/Remote Administrator’s workplace for Intellect versions older than 4.10.0, for versions newer 4.10.1 - both on the Server/Remote Administrator’s workplace and on the Client.

x32: (x32)
x64: (x64)

Type_view_dept_log

0,1,2

0

4.7.4 and later

Specifies displaying the  name of department in the log:

0 - do not add:  Ivanov Ivan Ivanovich;  
1 - add to the beginning:
[Sales department] Ivanov Ivan Ivanovich;
2 - add to the end:
Ivanov Ivan Ivanovich [Sales department].

x32: (x32)
x64: (x64)

URAttempts

 0 - 10000

3

4.7.3 and later

Sets the number of attempts to enter the user password .

x32: (x32)
x64: (x64)

URDelay

 0 - 10000

1060

4.7.3 and later

Sets the delay period (sec) for re-entering the system.

x32: (x32)
x64: (x64)

virtualgrabber

0, 1

0

4.7.6 and later

Defines whether it is possible to create  a virtual video capture card or no.

x32: (x32)
x64: (x64)

SyncNotEmpty

0, 1

0

4.8.5 and later

Defines the database synchronization algorithm:

1 – fast synchronization algorithm is in use;

0 -  standard synchronization algorithm is in use.

x32: (x32)\Debug
x64: (x64)\Debug

counter_period

>=0

0

4.9.0 and later

Defines the time period in seconds, in which information about availability of processor, memory and disk is recorded to the log-file. If the value of parameter is 0, this information is not included to the log-file.

x32: (x32)\ IntellectRunService
x64: (x64)\ IntellectRunService

RestartIntellectOnLogonDisable

0, 1

0

4.9.0 and later

1 – Intellect installed as a Service is not restarted under the current user even for users belonging to the IntellectUsers group.

0 – Intellect installed as a Service is restarted under the current user only if the user belongs to the IntellectUsers group.

x32: (x32)\ IntellectRunService
x64: (x64)\ IntellectRunService

CheckUserForRestartIntellectDisable

0, 1

-

4.9.0 and later

0 – Intellect installed as a Service is restarted (when entering the system) under the current user only if the user belongs to the IntellectUsers group.

1 – Intellect installed as a Service is restarted (when entering the system) under the current user even if the user doesn’t belong to the IntellectUsers group. The settings of permissions are to be taken into account when using this key. If the permissions are set incorrectly, then some Intellect features can operate incorrectly.

x32: (x32)
x64: (x64)

ShowHiddenObjects

0, 1

0

4.9.0 and later

0 – hidden objects corresponding to IntegratedAudioSource and IntegratedVideoSource objects, as well as to Integrated device child objects are not shown in the object tree in Intellect.

1 – hidden objects are shown in the object tree in Intellect.

Intellect is to be restarted when the key value is changed.

x32: (x32)
x64: (x64)

InheritServiceEnviroment

0, 1

-

4.8.8 only

The key is essential for proper operation of Intellect in MS failover cluster.

x32: (x32)\ IntellectRunService\
x64: (x64)\ IntellectRunService\

InheritServiceEnvironment

0, 1

-

4.9.0 and later

The key is essential for proper operation of Intellect in MS failover cluster.

x32: (x32)
x64: (x64)

SortCamsById

0, 1

-

4.8.8 and later

The key is responsible for sorting the list of cameras on the settings panelof the Monitor object.

1 – cameras are sorted by ID;

0 – cameras are sorted by names.

x32: (x32)
x64: (x64)

EventProcessingThreads

>=0

0

4.9.0

Key reserves the specified number of streams for events processing.

x32: (x32)\Debug
x64: (x64)\Debug

DumpYUV

0, 1

-

4.9.0.959

Key activates the mode of video dump corresponding to compressor.  It is required for diagnostics of StreamLabs (motionWavelet7.1) compressor/decompressor problems.

File (or files) with decompressed data will be created by key in the Modules directory. Names of files correspond to the template:
WxH_hv_chunk_№.yuv

W – width;
H – height;
h – horizontal subsampling;
v – vertical subsampling;
№ - number of file. If resolution or subsampling are changed the new file openes.

For example, file with resolution 640x480 in YUV420 color area will have the 640x480_22_chunk_0.yuv name.

x32: (x32)
x64: (x64)

x32: (x32)
x64: (x64)

0 – receiving of the SETUP reaction from the ATM object is disabled on the computer where this key is specified.

1 - receiving of the SETUP reaction from the ATM object is enabled on the computer where this key is specified. 

1 - F10 and F11 hot keys are in use to control screen displaying (see Main control panel section).

0 - F10 and F11 hot keys are not in use to control screen displaying.

Note.When the key is changed Intellect restart is required. 

 To disable F10 and F11 hot keys on the Administrator Remote Workplace, the key is to be created in the  \HKEY_CURRENT_USER\Software\ITV\Intellect registry section.

To disable F10 and F11 hot keys on the Administrator Remote Workplace when operating under the Admin account, he key is to be created in the same registry section as on Server (x32)/(x64).

0 -  F8 hot key is in use to call the Execute menu on the main control panel.  

1 - F8 hot key is not in use.

Note. To disable F8 hot key on the Administrator Remote Workplace, the key is to be created in the  \HKEY_CURRENT_USER\Software\ITV\Intellect registry section.

To disable F8 hot key on the Administrator Remote Workplace when operating under the Admin account, he key is to be created in the same registry section as on Server (x32)/(x64).

x32: (x32)
x64: (x64)

When the key value = 1, video or archive period is exported from the Monitor interface using the admin password.

By default the key is not created, the value is 10.

The key specifies maximum waiting time (in milliseconds) before sending data over the network.

The higher the value of this parameter, the more productive the system is (due to decreasing resources when sending a large amount of small messages).

The key sets the delay between disabling Guardant and unloading Intellect.

The delay is essential for the FORCED_OFF event generation of the SLAVE object and in case this event is used in scripts or programs, these scripts and programs are executed.

The key is for specifying the way of sorting the objects in the tree:

0 – sorting by name.

1 – sorting by ID.

Note 1. If sorting by name is chosen, and there are numbers in the object name, then the objects will be sorted in alphabetical order. For example, an object with the name "115" will be above the object with the name "15", because in the name "115" the second number is 1, and in the name "15" the second number is 5.

Note 2. This key also affects the sorting of objects in the tree when adding the objects to a layer in the Map Editor utility.

The key enables displaying the main control panel of Intellect on the screen.

0 – the main control panel is displayed when pointing to the upper right corner of the screen.

Sets time period (in days) of storing the change protocol in the database.

The storing period is counted from the last recording or starting from the current time depending on the value of the ClearProtocolFromCurrentTime key (see above).

The key enables the compression of transmitted messages:

0 - compression is disabled.

1 – messages from the cores are sent compressed (zip with maximum compression). Compression allows reducing the network load.

The key is used with the ACS/FAS integration modules that are the part of ACFA Intellect. It enables displaying the access card number for all events associated with the cards in the Event Viewer.
0 - the access card number is not displayed in the Event Viewer.
1 - when an event comes from the ACS device, the param1 parameter is interpreted as an access card number and is displayed in the Event Viewer in the Card column. This column is automatically added to the Event Viewer window when the first such event is received.

Note. In the released version 4.10.3 to show and hide the Card column use the Hide Card checkbox – see Event viewer parameters.

It enables recording of incoming messages to log files for started modules. The file name looks like <module name>.exe.cd.log.

These files are stored in the same folder as the executed module file, for instance, for intellect.exe the intellect.exe.cd.log file is stored in the Intellect installation directory and for itvscript.exe the itvscript.exe.cd.log file is stored in the Modules folder.

When the size of the log file exceeds 4 GB, it is archived to the backup file with .bak extension - <module name>.exe.cd.log.bak. This is necessary to avoid module overload.

Note. The log file is rewritten when Intellect is restarted.

0 – recording of incoming messages is disabled.

1 – recording of incoming messages is enabled.

х32 and x64:

HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon

The key sets a period in milliseconds to update video on Video Surveillance Monitors of the Clients after Failover Service has transferred configuration.

If the key value is less than 500, the monitors are updated regardless of the number of cameras.

If the key value is more than 500 and the number of cameras on the monitor is more than 64, the update does not occur while the System Settings dialog box is open.

x32: (X32)\
TELEMETRY
x64: (x64)\TELEMETRY

Delay

> = 0

250

4.7.3 and later

Defines the delay (ms) when sending commands to the camera. This key is essential for scaling the stream of commands to the device as some devices can be blocked because of too many commands and cannot process the information.

This parameter is not supported by IP cameras.

x32: (X32)\
TELEMETRY
x64: (x64)\TELEMETRY

JoysticThreshold

> = 0

5

4.7.6 HOTFIX and later

This parameter sets the joystick trigger threshold: the less the number is, the more sensitive joystick is.

0 value is not recommended to be used, as commands can be sent randomly.  When the value is too big, the joystick becomes rotation-insensitive.

x32: (X32)\
TELEMETRY
x64: (x64)\TELEMETRY

max_speed

0-10

-

4.7.3 to 4.9.7

Sets max. camera speed.

x32: (X32)\
TELEMETRY
x64: (x64)\TELEMETRY

min_speed

0-10

-

4.7.3 to 4.9.7

Sets min. camera speed.

x32: (X32)\
TELEMETRY
x64: (x64)\TELEMETRY

PriorityDelay

> =  0

30000

4.7.3 and later

Defines the priority delay (ms).

x32: (X32)\
TELEMETRY
x64: (x64)\TELEMETRY

UseBoschOSRD40

0, 1

-

4.8.4 and later

Enables presets saving for Bosch-Autodome control protocol.

x32: (X32)\
TELEMETRY
x64: (x64)\TELEMETRY

PnPJoystick

0, 1

0

4.8.3 and later 

The key defines whether to restart Intellect after connecting a joystick:

0 - Intellect is to be restarted after connecting the joystick.
1 - Intellect is not to be restarted after connecting the joystick.

x32: (X32)\
TELEMETRY
x64: (x64)\TELEMETRY

Zenable

0, 1

1

4.7.7 and later 

The key is in use with joysticks (e.g., Logitech Attack 3) where the telemetry control operates incorrectly because of shifted Z axis. Z axis is disabled when the parameter value is 0.  Z axis is enabled when the parameter value is 1.

The key is used in order to set the zoom step when panasonic-850 telemetry protocol is in use:

1 – zooming with 50% step of max. possible

0 – zooming with 20% step of max. possible

The key is responsible for coordinate move in the Z-direction.

The key is responsible for coordinate move in the Y-direction.

The key is responsible for coordinate move in the X-direction.

The key specifies way of  command transmission to telemetry:

1 – telemetry server is connected to video servers and sends commands to devices.

0 – telemetry server sends commands to the Intellect core which send them to devices.

See also description of the MonitorToTelemetryDirectCommand key below.

The key specifies way of transmission telemetry commands while control from the Monitor:

1 – telemetry server is connected to video servers and sends commands to devices while telemetry control from the Monitor.

0 – telemetry server sends commands to the Intellect core which send them to devices while telemetry control from the Monitor.

The key is in use with the TelemetryDirectCommand key to provide smoother telemetry control. Recommended values of these keys:

TelemetryDirectCommand = 1 (default value)

MonitorToTelemetryDirectCommand = 1 (attention: default value is 0)

The key is to enable the function of sending events to Intellect core when controlling PTZ. This function is essential for PTZ control audit.

1 – when sending any reaction of TELEMETRY object the corresponding event is generated.

The key enables presets created on the camera in Intellect. The function is only available when camera is connected via ONVIF protocol and only if video server settings are selected when adding a Video capture device using the Camera discovery tool and the Use device settings checkbox is set unchecked on the settings panel of the Video Capture Device object.

0 – presets created on the camera are not used in Intellect.

1 – presets created on the camera are in use in Intellect. The features are listed below:

1. The preset ID on the camera is to be the same as the preset ID in Intellect or differ by 1 depending on the camera features (see item 2).
2. As preset numeration starts differently on various cameras (with 0 or 1), then preset numbers can differ by 1 in Intellect. If the numeration on the camera starts with 0, then numeration in Intellect is the same. If the numeration on the camera starts with 1, then numeration in Intellect is greater by 1 (for instance, the first preset on the camera corresponds to the second in Intellect and the first in Intellect is not active).

x32: (X32)\Player
x64: (x64)\Player

Wav_delay

> = 0

0

 4.7.3 and later 

Defines the sound delay (sec) when playing back synchronously video with the sound.

x32: (X32)\ EventViewer
x64: (x64)\EventViewer

Overlay

0, 1

1

4.7.3 and later

Defines whether to use overlay.

x32: (X32)\ EventViewer
x64: (x64)\EventViewer

Topmost

0, 1

0

4.7.3 and later

Defines whether to display event log as topmost window: 

0 - standard window;

1 - topmost window.

x32: (X32)\ EventViewer
x64: (x64)\EventViewer

It sets the time period in minutes, after which, if there is no user activity, automatic scroll to the end of the event list when new events arrive is enabled in the Event Viewer window.

If 0 is specified, then automatic scroll is disabled.

x32: (X32)\ Subscribe
x64: (x64)\Subscribe

OBJECT_NAME

(*) (№.*) (№.№)

4.7.3 and later

Describes rules for system starting. Unimplemented system objects are disabled.

You should create a string parameter with the name that is used by the system of the object that is to be disabled and specify its ID separated by a full stop.
Example: DEPARTMENT.1:
«0» - disable,
«1» - enable
The “.*” parameter can be used - in this case all objects with “DEPARTMENT” name are disabled. Take into account that parameter with the ID is of a higher priority than the “.*” parameter. So there is no need to describe all objects by listing their IDs if there are a lot of objects that are to be disabled. You can just set 0 value to the “.*” parameter and list the objects that are not to be disabled.
All values are to be written in capital letters.
This registry section is applied to all system objects.

x32: (X32)\Video
x64: (x64)\Video

ArchiveFps

1-24

4.7.5 and later

Sets the number of frames recorded to the archive (max.resolution). LiveFps and ArchiveFps parameters are not to exceed 24 in total.

x32: (X32)\Video
x64: (x64)\Video

ArecontVision

0, 1

up to  4.8.0

Enables the protocol for integrating Arecont cameras. The key is not in use.

x32: (X32)\Video
x64: (x64)\Video

DoubleStream

0, 1

4.7.5 and later

Defines whether asynchronous video display mode is enabled or not.

x32: (X32)\Video
x64: (x64)\Video

IpIntDrivers3

Brand name: Axis; Acti, etc.

4.7.3 and later

The IpIntDrivers3 string parameter is created and the names of brands that need 3.0 driver are listed.

x32: (X32)\Video
x64: (x64)\Video

IpIntDriverVersion

2, 3

4.7.3 and later

Defines the version number of loaded drivers:
2 – to load drivers version 2.0;
3 - to load drivers version 3.0;
This parameter has a high priority and cancels IpIntDrivers3 parameter.

x32: (X32)\Video
x64: (x64)\Video

LiveFps

1-24

4.7.5 and later

Sets the number of frames displayed in the 800x600 format. LiveFps and ArchiveFps parameters are not to exceed 24 in total.

x32: (X32)
x64: (x64)

LoadIpIntDirectly

0, 1

4.9.0 and later 

1 - enable IntegratedDevice via video.run. If the setting is enabled and at least one IntegratedDevice is added, then other IP video capture cards are disabled.

0 - IIntegratedDevice operates as a separate run-module.

The key is used to change a transport protocol used by the IP device.

Example of the key value: "ONVIF"="tcp" means that TCP protocol is used to transfer data via ONVIF.

See details in Changing the transport protocol used by IP-device

Example of the key value: "rtsp"="multicast" allows enabling Multicast mode of the RTSP Server. The object configuration is required in addition to the key.

See details in Configuring RTSP Server module.

x32: (X32)\Video\MetadataTransportProtocols
x64: (x64)\Video\MetadataTransportProtocols

The name of camera driver (in the driver parameter of the

The key sets unused driver unload timeout for cameras. For instance, if camera brand is in several drivers, all of them are loaded at camera connection. To unload the unused drivers, set non-zero value to this key.

If the key is not created, then unused drivers are unloaded in 60 seconds.

0 – drivers do not unload (such behavior was in DriverPack versions older than the current one).

The key value that is > 0 sets unused driver unload timeout.

x32: (X32)\TELEMETRY
x64: (x64)\TELEMETRY

The key is used to enable the compatibility between presets in Intellect and previous versions of Drivers Pack, i.e. to decreasing the preset number by 1 when sending it to the driver.

0 – a new operation mechanism with presets the same as in AxxonNext is in use in Intellect. If preset 1 is selected in Intellect interface, then value 1 is sent to the driver.

x32: (x32)\Video
x64: (x64)\Video

The key sets the number of streams created in FFmpegDecoder.

0 – decoder automatically selects the number of created streams.

>0 – sets the number of streams in use.

By default if there is no key or the value is incorrect, then value 1 is in use.

x32: (x32)\EventSources
x64: (x64)\EventSources

<brand>.<model> (for example, ONVIF.1_channel_device).

If all models of some manufacturer require a specific method of getting events, then there must be a string key named <brand> in the section.

Pull point

Meta data

Disable

By the date the documentation in created, this key is supported for three brands: ONVIF, RVi and IDIS. For models of these brands, the key is created automatically when the Drivers Pack is installed.

The key sets a method of getting data about the analytics and the sensors of the device:

• Pull point – getting events by http request of the camera
• Meta data – getting events from the metadata stream
• Disable – getting events is disabled.

enable

disable

The key is intended for setting up synchronization source (SSRC) for RTSP stream:

enable – SSRC check enabled;

disable – SSRC ched disabled.

x32: (x32)\Video
x64: (x64)\Video

<brand>.<model>, for example, Tattile.ANPR Mobile

If all brand's models require a certain method of the timestamp adjustment, then the section must contain a string key with the name <brand>.

• InfrequentTs
• ValidDeviceTs
• None

The keys in this section specify the method of the frame timestamp adjustment.

If the key is not created, the timestamp transferred to the Intellect equals 0, and then the current time is set as its value.

The None value is used if it is necessary to disable the adjustment and transfer the timestamp received from the camera as is.

The ValidDeviceTs value means that the timestamp adjustment method is used before the timestamps transmission to the Intellect if the timestamp received from the camera differs from the current time by the value greater than the one specified in the MaxTimestampDeviation key (see below). After the adjustment, the timestamp calculated on the basis of the previous frame's timestamp and the time elapsed since its reception is transmitted to the Intellect.

InfrequentTs value discards the relative timestamps, transferring 0 to the Intellect instead (i.e., the current time is set as the timestamp value), and it also transfers the absolute timestamps with the ETimestampValidityFlag flag. This adjustment method should be used for the devices with the license plates recognition which transfer the separate frames to the external system, rather than a continuous video stream.

For some manufacturers, when installing the Drivers Pack, the keys with the necessary values are automatically created in the appropriate registry key.

The key is used for the ValidDeviceTs key value from the TsConverters branch (see above).

The key sets the maximum permissible deviation of the frame timestamp from the current Server time.

The key enables the interruption of the H.265 video decoding via the ffmpeg decoder in case of the slightest error in the video stream.

0 - if the video stream contains errors, then a buffer with artifacts will be received from the ffmpeg decoder.

1 - if the video stream contains errors, then an empty buffer will be received from the ffmpeg decoder.

x32: (X32)\ DB Import
x64: (x64)\ DB Import

ChunkSize

> 0 and >= photo size

32768

4.7.3 and later

Sets the buffer size (in bytes) when reading large files (photo) in the external DB.

x32: (X32)\ DB Import
x64: (x64)\ DB Import

CursorLocation

1, 2, 3

2

4.7.3 and later

Sets the cursor location (pointer to DB entries):
1 – do not create the cursor;
2 – create the cursor on the Server;
3 – create the cursor on the Client.

x32: (X32)\ DB Import
x64: (x64)\ DB Import

DwSleep

> = 0

1

4.7.3 and later

Sets the delay value (ms) when sending modified entries to the core in the external DB in order not to get 100% CPU load.

x32: (X32)\ DB Import
x64: (x64)\ DB Import

FlagsLog

-

-

up to 4.7.5

x32: (X32)\ DB Import
x64: (x64)\ DB Import

MoveFirst

0

0

4.7.3 and later

The key must not be modified.

x32: (X32)\ events
x64: (x64)\ events

Events_out

-

-

up to 4.7.5

Debug key

x32: (X32)\ events
x64: (x64)\ events

Events_out2

-

-

up to 4.7.5

Debug key

x32: (X32)\ events
x64: (x64)\ events

In

-

-

up to 4.7.5

Debug key

x32: (X32)\ events
x64: (x64)\ events

PostedEvents

-

-

up to 4.7.5

Debug key

x32: (X32)\ events
x64: (x64)\ events

PostedReacts

-

-

up to 4.7.5

Debug key

x32: (X32)\ events
x64: (x64)\ events

Reacts_out

-

-

up to 4.7.5

Debug key

x32: (X32)\ Keyb
x64: HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\ITV\ INTELLECT\Keyb

Prefix

VK_NUMPAD0
VK_NUMPAD1
VK_NUMPAD2
VK_NUMPAD3
VK_NUMPAD4
VK_NUMPAD5
VK_NUMPAD6
VK_NUMPAD7
VK_NUMPAD8
VK_NUMPAD9
VK_MULTIPLY
VK_ADD
VK_SEPARATOR
VK_SUBTRACT
VK_DECIMAL
VK_DIVIDE
VK_F1
VK_F2
VK_F3
VK_F4
VK_F5
VK_F6
VK_F7
VK_F8
VK_F9
VK_F10
VK_F11
VK_F12
VK_F13
VK_F14
VK_F15
VK_F16
VK_F17
VK_F18
VK_F19
VK_F20
VK_F21
VK_F22
VK_F23
VK_F24

0x60

0x61

0x62

0x63

0x64

0x65

0x66

0x67

0x68

0x69

0x6A

0x6B

0x6C

0x6D

0x6E

0x6F

0x70

0x71

0x72

0x73

0x74

0x75

0x76

0x77

0x78

0x79

0x7A

0x7B

0x7C

0x7D

0x7E

0x7F

0x80

0x81

0x82

0x83

0x84

0x85

0x86

0x87

4.7.3 and later

The list is not full. Any soft key can be in use.

x32: (X32)\Video\Detectors\Vmda

x64:

(x64)\Video\Detectors\Vmda

InactiveInterval

>0

-

4.9.0

Key specifies time period in minutes, during which absence of detected objects by tracker is permitted. If the key is created, after the specified time and if there is no activity of VMDA detection, the message about inactivity will be generated. On default, this message is not generated.

x32:(X32)\Video\Detectors\Vmda

x64:

(x64)\Video\Detectors\Vmda

The VMDA detection tool IDs separated by comma orsemicolon that should be triggered when the object speed is less than the speed configured for the VMDA detection tool.

Note 1. If no ID is specified for this parameter, or there is no parameter at all, the detection tool is triggered when an object crosses the line in the selected direction with a speed that is approximately the same as the speed configured for the VMDA detection tool. 

Note 2. The same VMDA detector id can only be specified for either the VMDA.useSpeedLimitTypeLessThan or the VMDA.useSpeedLimitTypeMoreThan (see below) parameters. The simultaneous operation of both these parameters for the same VMDA detector is not allowed.

x32:(X32)\Video\Detectors\Vmda

x64:

(x64)\Video\Detectors\Vmda

The VMDA detection tool IDs separated by comma orsemicolon that should be triggered when the object speed is greater than the speed configured for the VMDA detection tool.

Note 1. If no ID is specified for this parameter, or there is no parameter at all, the detection tool is triggered when an object crosses the line in the selected direction with a speed that is approximately the same as the speed configured for the VMDA detection tool. 

Note 2. The same VMDA detector id can only be specified for either the VMDA.useSpeedLimitTypeLessThan (see above) or the VMDA.useSpeedLimitTypeMoreThan parameters. The simultaneous operation of both these parameters for the same VMDA detector is not allowed.

The key sets the camera stream used by the detection modules included in the Detector Pack subsystem.

0 - the Video Analytics stream is used.

1 - the Default stream is used.

Note. If the camera is not used in the multi-thread mode, the first stream (the only one) will be used regardless of the key value.

x32: (x32)\WebServer\

x64:

Sets max.time (in milliseconds) for Server to process a request.

x32: (x32)\WebServer\

x64:

x32: (x32)\Map\

x64:

x32: (x32)\Map\

x64:

The key is designed to disable object framing.

0 – the object is framed.

x32: (x32)\Map\

x64:

Sets the Y-axis coordinate of the bottom right corner of the minimap on the monitor in pixels.

x32: (x32)\Map\

x64:

Sets the Y-axis coordinate of the upper left corner of the minimap on the monitor in pixels.

x32: (x32)\Map\

x64:

Sets the X-axis coordinate of the bottom right corner of the minimap on the monitor in pixels.

x32: (x32)\Map\

x64:

Sets the X-axis coordinate of the upper left corner of the minimap on the monitor in pixels.

x32: (x32)\Map\Minimap

x64:

Sets how the minimap is displayed:

0 – using the Minimap item in the Map feature menu.

x32: (x32)\Map\

x64:

Integer

x32: (x32)\Map\

x64:

The key enables the automatic "Fit the window"checkbox activation for all layers in the Map editor window if this checkbox was previously set for any layer.

0 - the layer will be fit into the Map editor window only if the "Fit the window" checkbox was previously set for this layer.

1 - any layer will be fit into the Map editor window, if the "Fit the window" checkbox was previously set for any layer.

x32: (x32)\Map\

x64:

The key hides the "Value =" in the value of the objects on the Map for which the Text type of display is selected.

0 - objects' text values are displayed on the Map with the "Value =.

1 - objects' text values are displayed on the Map without the "Value =.

x32: (x32)\Map\

x64:

x32: (x32)\MMS\

x64:

x32: (X32)\Video
x64: (x64)\Video

UseRealTimeStamps

Comma-separated camera identifiers

-

4.9.5 to 4.9.7

Identifiers are separated by commas for cameras for which current timestamps are to be sent. Due to features of the unattended object detection tool (that is a third-party module) it sends synthetic timestamps by default.

x32: (X32)\Video
x64: (x64)\Video

unattendedObjectSensitivity

Comma-separated sensitivity values in the ‘camera id.sensitivity’ format.

Sensitivity range –[1...25]

EXAMPLE: unattendedObjectSensitivity="1.15,99.20,4.7"

7 for all cameras

4.9.5 to 4.9.7

Sets sensitivity of unattended objects detection tool for specified cameras.

x32: (X32)\Video
x64: (x64)\Video

unattendedObjectLongMemory

Comma-separated camera identifiers

EXAMPLE unattendedObjectLongMemory ="1,1000,2,999,3,5,4,6,7,8"

-

4.9.5 to 4.9.7

Sets identifiers of cameras to which the unattended object detection tool with long memory is to be used.

x32: (X32)\Video
x64: (x64)\Video

unattendedObjectTimeBeforeCheck

Values of periods are comma-separated and are in the ‘camera id.period’ format.

EXAMPLE unattendedObjectTimeBeforeCheck = "4.20,1.10,3.40"

By default it is the same as the waiting for loss period set while configuring the Tracker object (see Creating and configuring the Tracker object).

4.9.5 to 4.9.7

Time in seconds before checking object in case of using the unattended object detection tool with long memory.

x32: (X32)\Video
x64: (x64)\Video

determineNoise

0, 1

1

4.9.5 to 4.9.7

Use (1) or not (0) the algorithms for detecting pseudo-moving objects

x32: (X32)\Video
x64: (x64)\Video

determineColorIdentity

0, 1

1

4.9.5 to 4.9.7

Use (1) or not (0) the algorithms for detecting objects matching by their color characteristics 

x32: (X32)\Video
x64: (x64)\Video

determineHumanCar

Comma-separated camera identifiers.

EXAMPLE determineHumanCar ="1,1000,2,999,3,5,4,6,7,8"

-

4.9.5 to 4.9.7

Sets the list of camera identifiers for which the algorithm of determining whether it is a car or a human is to be ENABLED.

For proper operation of the tracker determineGivenTaken and determineHumanCar keys MUST be used at the same time. There is no point in using only one key.

x32: (X32)\Video
x64: (x64)\Video

determineGivenTaken

Comma-separated camera identifiers.

EXAMPLE determineGivenTaken ="1,1000,2,999,3,5,4,6,7,8"

4.9.5 to 4.9.7

Sets the list of camera identifiers for which the algorithm of determining whether the object is given or taken is to be enabled in the unattended object detection tool.

For proper operation of the tracker determineGivenTaken and determineHumanCar keys MUST be used at the same time. There is no point in using only one key.

x32: (X32)\Video
x64: (x64)\Video

VMDAFPS

>=-1

30

4.9.5 to 4.9.7

Sets fps to be sent to the tracker.  
-1 – ALL FRAMES
0 – send a frame to the tracker if the tracker is available (processed the previous frame).
>0 – maximum fps sent to the tracker.

The key specifies usage of previous frame processing before its sending to video analytics repository:

0 – not to use.

1 – to use.

If the key is enabled, it's in use for all cameras.

Important! The useFilterFrame parameter is to have ‘1’ value for key operation (see below).

The key specifies post processing usage of frames received from video analytics repository. Procedure is configured only for operation with frames from left-off items detection, so it can operate incorrectly with frames from tracker. If the key is enabled, it is in use for all cameras.

Important! The useFilterFrame parameter is to have ‘1’ value for key operation (see below).

The key is responsible for enabling frame pre-process before its analysis. If it is disabled, useLeftImprover and useLeftImproverGeometry keys won’t work (see above).

1 – enabled;

0 – disabled.

 x32: (X32)\Video\AVI
x64: (x64)\Video\AVI

1 – utility is started in export mode in the AXXN codec if Export to AVI in initial format item is selected.

0 – export is possibly performed in original format.

Key sets priorities of the AviExport utility and is used by the Video.run module while its starting:

-2 – low priority (IDLE_PRIORITY_CLASS)

-1 – below average priority(BELOW_NORMAL_PRIORITY_CLASS)

 0 – average priority (NORMAL_PRIORITY_CLASS)

 1 – above average priority (ABOVE_NORMAL_PRIORITY_CLASS)

 2 – high priority (HIGH_PRIORITY_CLASS)

>0

Fractional values can be specified with comma as decimal separator  (for example, "0,5")

When the export period is being set, the key disables the automatic loading of indexes until the date/time control focus is removed.

0 - the indexes are loaded automatically.

1 - the indexes are not loaded until the focus is removed from the date/time controls.

The key sets the width of buttons (in pixels) of the Monitoring Center. The button position is changed automatically when the values are changed. 

x32: (x32)\POS
x64: (x64)\POS

Capture

0, 1

1

4.7.3 and later

Defines whether to store log-files or not. 
Log-files are stored in the IntellectFolder\Modules\PosCapture folder.

x32: (x32)\POS
x64: (x64)\POS

Dos2Win

0, 1

1

4.7.3 and later

Detects encoding:
1 - read XML encoding in DOS codepage;
0 - read  XML as it is

x32: (x32)\POS
x64: (x64)\POS

GlobalTextDelay

-

0

4.7.3 and later

Sets the shift of Text data from video to TextSearch.

x32: (x32)\POS
x64: (x64)\POS

Nohotkey

0, 1

1

4.7.3 and later

Allows disabling hot keys used for POSVIEWER and TITLEVIEWER. If Nohotkey = 1, then when clicking
Ctrl+Shift+E - the frame export folder is opened;
Ctrl+Shift+T - the Tools folder is opened.

x32: (x32)\POS
x64: (x64)\POS

PosLogMaxsize

>0

10

5.1

The key sets maximum size (in MBs) of the POS terminal’s log.

Note. POS terminal logging is enabled using the Capture key – see above.

The key enables the received local timestamp conversion to UTC when creating a record in the corresponding POS-Intellect database.

0 - received local timestamp will be recorded to the corresponding database without any changes.

1 - received local timestamp will be converted to UTC when creating a record in the corresponding database.

In case the D-store POS-terminals are used, the key enables saving the info about the last cashier whose data was received by the POS-terminal. Until there is no data, the following default values are used: cashier_name = "Jane B."; cashier_number = "1147911";

0 - the info about the last cashier whose data was received by the POS-terminal, is not saved.

1 - the info about the last cashier whose data was received by the POS-terminal, is saved.

In case the D-store POS-terminals are used, the key enables initiating the receipt creation by any data input. In addition to that, the text line specified in the NewReceipt.Word key (see below) is added to the receipt text.

0 - the receipt creation is initiated by the word specified to trigger the receipt creation.

1 - the receipt creation is initiated by any data input, and the text line specified in the NewReceipt.Word key (see below) is added to the receipt text.

Note. This key works only if the UseLastCashierInfo key (see above) is enabled.

NewReceipt.Word

The key activates displaying in the Monitor the time (UTC) when each caption appeared.

0 - the captions timestamps (UTC) are not displayed in the Monitor.

1 - the captions timestamps (UTC) are displayed in the Monitor.

x32: (x32)\FRS
x64: (x64)\FRS

The key defines on how many CPU cores the face recognition module will operate (firserver.run process). All cores are in use by default.

The key sets the timeout upon which Face Server ‘loses’ the face if there is no new data about it.

Sets the parameters of generating and attaching face biometrics in the detection tool:

1 – Face detection tools generate and attach face biometrics to the photo. 

0 – Face detection tools do not generate face biometrics - the face is only captured.

Note. Face recognition Server that performs search in the user database checks up whether it has attached biometrics when it gets a face photo. If yes, then biometrics are not further generated for search in the database - data attached to the photo is in use. If no, then recognition Server generates biometrics itself using the photo. 

Specifies what data will be stored in the database when using the Face recognition Server:

1 - all captured faces.
0 - only the faces about which there are recognition results.

The key is in use in order to avoid the database overflow.

Note. Since version 6.2 use the UseFaceDB key in order to minimize the amount of data stored in DB.

The key is used to configure the face detection tool – it sets time on the expiry of which the face is considered lost.

For instance, if timeUntilLost = 1 and a man covers his face with the hands in front of the camera and then shows it again, then the face detection tool does not capture it as it considers that the face was lost for the time it was covered.

The key sets the mode for storing metadata, images and vectors of captured and reference faces.

0 – metadata, images and vectors are stored only in database.

1 – metadata, images and vectors are stored in database, images and vectors are also storing in a folder on disk. Path to folder is specified using the FaceDB parameter(it is possible to specify both a local and network folder).

2 – metadata are stored in the database, images and vectors are storing only in a folder on disk. Path to folder is specified using the FaceDB parameter (it is possible to specify both a local and network folder).

CpuCoreCountAddPerson

The key defines the number of CPU cores where the vectors of persons are generated when adding a reference face to the database.

0 - vectors are generated on the number of cores specified in the CpuCoreCount key. The cores are used successively. Recognition sample is bound to each core. 

1 - only 1 fixed core (different from those specified in CpuCoreCount) is in use when adding a reference face to the database. 

2 - only 2 fixed cores (different from those specified in CpuCoreCount) are in use when adding a reference face to the database.

Face.HardwareCPU

The key defines the order of binding streams to CPU cores when generating vectors of persons.

no value or 0 - streams are bound randomly to CPU cores.
1 - streams are bound successively to CPU cores depending on their total number. 
2 - streams are bound to first cores of each CPU.

Mechanism of displaying faces. When a new mechanism of displaying is enabled, the photo in the list of captured faces is not duplicated - it is updated in the same cell while the tracker "sees" it.  

0 - new mechanism of displaying faces. 

1 - old mechanism of displaying faces. 

The key enables saving the last recognized face and all its necessary data to a file. This image file can be sent directly to the recognition server via the iidk_client utility.

0 - General operation mode.

1 - When the face is captured, the captureFrame (cam_N) .log file is created (where N is the camera number that captured the face) in the <Intellect Installer directory>\Modules (64)\ folder. This file will contain the last recognized face and all its necessary data. This image file can be sent directly to the recognition server via the iidk_client utility.

Note. The file is overwritten every time a new face is captured.

The key restricts resolution (width) of the photo when adding it to the faces database.

Set greater value to the key if the following message appears when adding a face to DB: "Adding error. The face was not added. Insufficient image quality to add".

The key restricts resolution (height) of the photo when adding it to the faces database.

The key enables selecting the Tevian algorithm.

0 – less resource intensive algorithm is in use

1 – more resource intensive algorithm is in use 

Important! Biometric vectors received using this algorithm cannot be used with alternative one. For proper operation of Face Intellect after changing this parameter biometric vectors are to be converted as described in Transition between face recognition modules section. 

Another filtering false events algorithm. This key is in use if Tevian.GlobalTrackingDetectionFilter=0 and Tevian.DetectionFilterValue > 0 (see the corresponding parameters below). 

0 - ALG1

1 - ALG2

Note. It is not recommended to change this parameter without consulting Tevian.

Configuring alternative algorithm filtering. It is in use if the value ofTevian.GlobalTrackingDetectionFilter if more than 0 (see the corresponding parameter below).

Note. It is not recommended to change this parameter without consulting Tevian.

Face detection operation mode (identification). The recommended parameter value is 0.

0 - ALG1

1 - ALG2

Note. It is not recommended to change this parameter without consulting Tevian.

This parameter affects the detector captioning capacity. If there is a great value, the tracks can rend.

Note. It is not recommended to change this parameter without consulting Tevian.

Face detector confidence threshold (do not confuse with face quality).

Note. It is not recommended to change this parameter without consulting Tevian.

Filtering false events in the tracker (IGlobalTracker).

0 - disabled

1 - enabled

Note. It is not recommended to change this parameter without consulting Tevian.

The key enables selecting the Tevian algorithm.

0 - ALG1 less resource intensive algorithm is in use.

1 - ALG2 identification of the highest quality, but more resource intensive.

Important! Biometric vectors received using this algorithm cannot be used with alternative one. For proper operation of Face Intellect after changing this parameter biometric vectors are to be converted as described in Transition between face recognition modules.

The number of seconds to accumulate the best frames for recognition in the track. The longer the time, the poorer is the accuracy of the age determinination.

If the 1 second value is set, the average error in determining the age will be 2-3 years, and if the 5 seconds value is set, it will be 3-4 years.

Time since the last recognition after which the track is considered ended.

Note. It is not recommended to change this parameter without consulting Tevian.

x32: (x32)\DetectorExt\HeatZoneDetector

x64: (x64)\DetectorExt\HeatZoneDetector

Sets the data collection frequency (sec) for heat zone detection tool.

x32: (x32)\DetectorExt\HeatZoneDetector

x64: (x64)\DetectorExt\HeatZoneDetector

Sets the data update frequency (sec) from heat zone detection tool in the Debug window in seconds.

Rovalant A6-A16 ISS 

x32: (x32)\Rovalant_A6_A16
x64: (x64)\Rovalant_A6_A16

access_point_count

-

10

4.7.6 and later

Internal module setting. You’d better not modify the key.

x32: (x32)\Rovalant_A6_A16
x64: (x64)\Rovalant_A6_A16

rele_count

-

20

4.7.6 and later

Internal module setting. You’d better not modify the key. 

Apollo (AAN 100, AAN 32, AIM-4, AIM-4SL)

x32: (x32)\Apollo
x64: (x64)\Apollo

DisableLogOffLineEvents

0, 1

0

4.7.4 and later

Disables event logging when the controller is in the offline mode.

x32: (x32)\Apollo
x64: (x64)\Apollo

EnableHardwareReset

0, 1

1

4.7.4 and later

Enables hardware reset before forwarding configuration.

x32: (x32)\Apollo
x64: (x64)\Apollo

nCardType

0, 1

0

4.7.4 and later

Defines the card type. When the value is 1, support for Weigand32 is enabled.

x32: (x32)\Apollo
x64: (x64)\Apollo

nPINType

0, 1, 2

1

4.7.4 and later

Defines whether PIN is in use:
0 – not is use;
1- PIN 4 figures;
2 - PIN 6 figures.

x32: (x32)\Apollo
x64: (x64)\Apollo

SetLinkParametersAfterReset

0, 1

1

4.7.4 and later

Sets link parameters after reset.

ABC (Access Net) 

x32: (x32)\ABC
x64: (x64)\ABC

UseDynamic

0, 1

0

4.7.4 and later

Defines whether the Dynamic checkbox is available in the controller settings. In this case configuration forwarding in a separate stream can cause module crash.

x32: (x32)\ABC
x64: (x64)\ABC

UseMultiThreaded

0, 1

0

4.7.4 and later

Sets the use of the multithreading mode.

Perco Card Reader

x32: (x32)\Perco CR
x64: (x64)\Perco CR

ReadTotalTimeoutConstant

> = 0

-

4.7.4 and later

Sets timeout of reader query. If connection is lost sometimes, then the value is to be increased.

PERCO-SYSTEM-12000L ACS 

x32: (x32)\Perco
x64: (x64)\Perco

AdditionNumberOfCard

0

4.7.4 and later

If the number of card is read with displacement (error of COM Server Perco), then the value of this parameter defines the displacement.

x32: (x32)\Perco
x64: (x64)\Perco

AutoconfigType

0, 1,2,3

0

4.7.5 and later

Sets auto configuration mode:
0 – feature is not available;
1 – controllers that do not exist are deleted;
2  - controllers that do not exist are deleted and new found controllers are stored at the end of the object tree;
3 – new found controllers are stored at the end of the object tree.

x32: (x32)\Perco
x64: (x64)\Perco

DisableOffLine

0, 1, 2

0

4.7.4 and later

0  - standard action;
1 - controller access  to all cards with  shift schedule is forbidden;
2 - controller access to all cards is forbidden.

x32: (x32)\Perco
x64: (x64)\Perco

RequestTime

> = 0

1000

4.7.4 and later

Sets the time period during which the log is read, at the end of this period the reading stops and commands are executed (ms).

x32: (x32)\Perco
x64: (x64)\Perco

SendLevelBeforePerson

0, 1

0

4.7.4 and later

Defines whether to send the access level after sending person to controller or not.

x32: (x32)\Perco
x64: (x64)\Perco

ShowSendLevel

0, 1

0

4.7.4 and later

Defines whether the Send access levels button is shown for Perco object in Intellect settings or not:
0 - disabled (by default);
1 – enabled.

x32: (x32)\Perco
x64: (x64)\Perco

Show_progress

0, 1

0

4.7.4 and later

Defines whether to show progress bar when forwarding configuration or not.

x32: (x32)\Perco
x64: (x64)\Perco

TimeOut

-

-

4.7.4 and later

Set the gateway query timeout.

x32: (x32)\Perco
x64: (x64)\Perco

VerifyLogMesDB

-

-

-

The key is not in use.

Rubeg

x32: (x32)\RUBEG8_ISB
x64: (x64)\RUBEG8_ISB

ConvertUserBcpToUserIntellect

0, 1

0

4.7.4 and later

Defines whether to allow Rubeg users to access Intellect or not:
0 - forbid importing Rubeg users to Intellect;
1 - allow importing Rubeg users to Intellect.

x32: (x32)\RUBEG8_ISB
x64: (x64)\RUBEG8_ISB

ShowError

0, 1

0

4.7.4 and later

Defines whether to show dialog boxes with Rubeg COM server errors:
0  - forbid displaying dialog boxes;
1 - allow displaying dialog boxes.

x32: (x32)\RUBEG8_ISB
x64: (x64)\RUBEG8_ISB

UseThreadDynamicProcess

0, 1

1

4.7.5 and later

Sets the thread for forwarding user configuration:
0 - forwarding in the primary thread;
1 - forwarding in the secondary thread.

x32: (x32)\RUBEG8_ISB
x64: (x64)\RUBEG8_ISB

1 - algorithm of correction of duplicated users is in use;
0 - algorithm of correction of duplicated users is not in use.

x32: (x32)\RUBEG8_ISB
x64: (x64)\RUBEG8_ISB

The key is required for operation of integration with Failover module.

0 – do not save Rubezh server configuration to DB.

1 – save Rubezh server configuration to DB.

NAC-501/W6500.CNT ACS controller

x32: (x32)\Nac\Dll
x64: (x64)\Nac\Dll

delay

> = 1

1

4.7.4 and later

Delay (ms) when sending users between them. Default - 1 (no delay).

x32: (x32)\Nac
x64: (x64)\Nac

Delay green led

> = 0

0

4.7.4 and later

Defines how much time (ms) the reader (NAC51P only) is excluded from the query after receiving the event.

x32: (x32)\Nac
x64: (x64)\Nac

Delay open door

> = 0

500

4.7.4 and later

Defines how much time (ms) the reader (NAC51P only) is excluded from the query after authorized access.

x32: (x32)\Nac
x64: (x64)\Nac

Delay prohibited access

> = 0

250

4.7.4 and later

Defines how much time (ms) the reader (NAC51P only) is excluded from the query after enabling the prohibited access mode.

x32: (x32)\Nac
x64: (x64)\Nac

Delay red led

> = 0

250

4.7.4 and later

Defines how much time (ms) the reader (NAC51P only) is excluded from the query after prohibiting access.

x32: (x32)\Nac
x64: (x64)\Nac

enable_thread

1

1

4.7.4 and later

Checkbox of forwarding configuration in a separate thread; the value is always 1 (do not modify). The key is out of date.

x32: (x32)\Nac
x64: (x64)\Nac

fqLinkSet

> = 0

1000

Defines the rate (ms) of attempts to connect the reader if there is no connection.

x32: (x32)\Nac
x64: (x64)\Nac

FlagsLog

0x01 - erroneous file recording/reading
0x02 - sent commands
0x04 - poll
0x08 - erroneous answers to sent commands
0x10 - erroneous answers to poll commands
0x20 - the reader is occupied, repeat is in nn ms
0x40 - card status confirmation
0x80 - master card is shown
0x100 - door open/close
0x200 - TIMEOUT

0x02F9

4.7.4 and later

Sets bit values for logging to log file (what to log).

x32: (x32)\Nac\Dll
x64: (x64)\Nac\Dll

show_progress

0, 1

1

4.7.4 and later

Defines whether to show the progress when forwarding the configuration.

SATEL FAS ACS

x32: (x32)\Satel
x64: (x64)\Satel

Get_Outputs

0, 1

1

4.7.4 and later

1 - Allow getting relay states;
0 - Forbid getting relay states.

x32: (x32)\Satel
x64: (x64)\Satel

Get_Troubles

0, 1

1

4.7.4 and later

1 - Allow getting states of troubles;
0 - Forbid getting states of troubles.

x32: (x32)\Satel
x64: (x64)\Satel

Timeout

Any positive number

300

4.7.4 and later

Timeout of getting next message byte from the controller, ms.

x32: (x32)\Satel
x64: (x64)\Satel

Transmit_Cmd_Timeout

Any positive number or 0 to forbid receiving states

1000

4.7.4 and later

Rate of getting states (relay and troubles) in ms.

x32: (x32)\Satel
x64: (x64)\Satel

Verify_Link_Timeout

Any positive number

500

4.7.4 and later

Max. waiting time (ms) of getting an event from controller.
If the value is exceeded, then module considers that there is no connection with controller.

x32: (x32)\nc

x64: (x64)\nc

x32: (x32)\nc

x64: (x64)\nc

x32: (x32)\nc

x64: (x64)\nc

x32: (x32)\nc

x64: (x64)\nc

x32: (x32)\nc

x64: (x64)\nc

VMS (Visitor Management System)

x32: (x32)\id_limit
x64: (x64)\id_limit

PERSON_MINID

1-99999

-

4.7.6 and later

These keys are created to generate disjoint IDs of objects on different computers.
PERSON_MINID - PERSON_MAXID – allowed range of user IDs to edit access control service.
If PERSON_Restrict = 0, then keys are not active.

x32: (x32)\

x64: (x64)\

Note. If this section has not been created, then the system will look for the key in the section.

HKEY_CURRENT_USER\Software\ITV\INTELLECT\