Go to documentation repository
Page History
...
| width | 45% |
|---|
| Panel | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| ||||||||||
|
...
| width | 45% |
|---|
...
| borderColor | #CCCCCC |
|---|---|
| bgColor | #FFFFFF |
| titleBGColor | #F0F0F0 |
| borderStyle | solid |
| title | Designations |
The following designations are in the reference guide:
(x32) - HKEY_LOCAL_MACHINE\SOFTWARE\ITV\INTELLECT\ registry section
(x64) - HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\ITV\INTELLECT registry section
For the ATM-Intellect software:
...
For the ATM Event Capture utility:
...
General information on Windows OS registry and working with it is given in the Working with Windows OS registry section of the Administrator's Guide.
Intellect Enterprise base version
...
Video
...
Registry section
...
String parameter
...
Available values
...
Default
...
Product version
...
Parameter in effect
...
x32: (X32)\Video
x64: (x64)\Video
...
AcsStdLimit
...
1-30
...
1
...
4.8.0 and later
...
Sets the upper limit of succession of frames in the stream in the MJPEG format. If the succession of frames sent to the remote workstation rises to the value specified in the registry key, then scaling is enabled.
...
x32: (X32)\Video
x64: (x64)\Video
...
AcsMpegLimit
...
1-30
...
25
...
4.8.0 and later
...
Sets the upper limit of succession of frames in the stream in the H.264/MPEG4 format. If the succession of frames sent to the remote workstation rises to the value specified in the registry key, then scaling is enabled.
...
x32: (X32)\Video
x64: (x64)\Video
...
Activecam
...
0, 1
...
1
...
4.7.3 and later
...
Defines whether to activate the camera by the first click.
...
x32: (X32)\Video
x64: (x64)\Video
...
ActivateTelemetryHotkeys
...
0, 1
...
0
...
4.8.2 and later
...
Defines whether the Telemetry control via hotkeys is activated.
...
x32: (X32)\Video
x64: (x64)\Video
...
AdaptiveClientFrameSkip
...
0, 1
...
1
...
4.8.2 and later
...
When the value is 0, then scaling on the Server is disabled. It is better not to disable scaling.
...
x32: (X32)\Video
x64: (x64)\Video
...
AdaptivePlayer
...
0, 1
...
0
...
4.7.6. HOTFIX build 214 and later
...
The key is created on the Server. It defines whether the AdaptivePlayer is enabled.
When the playback speed is changed, the Client sends data about new speed to the Server. Every time there is the change the Server clears the succession of frames sent to the Client and starts creating a new one with scaling specified by the Client. Hence, the Client does not get every frame – this reduces the Server load.
...
x32: (X32)\Video
x64: (x64)\Video
...
FastPlayStep
...
1-6
...
1
...
4.8.0 and later
...
The key is created on the Client. It allows setting the step of playback speeding-up. Example: for the 3 value the speeding-up step is x6 (i.e. playback speed can be x6, x12, x18, etc.), for 5 - x10.
Max playback speed is x60. High playback speed can be achieved when the AdaptivePlayer is enabled.
...
x32: (X32)\Video
x64: (x64)\Video
...
allclientsbps
...
>=0
...
0
...
4.7.6 and later
...
Sets the upper limit of total outgoing video traffic: :
0 – not in use;
>0 – max bandwidth of outgoing stream for all Video.run clients.
...
x32: (X32)\Video
x64: (x64)\Video
...
AllowDelete
...
0, 1
...
0
...
4.7.3 and later
...
The key allows deleting files in the archive list when clicking the Del button.
...
x32: (X32)\Video
x64: (x64)\Video
...
AlwaysServerConnection
...
0, 1
...
1
...
4.7.3 and later
...
Defines whether to connect the Monitor to the Server.
...
x32: (X32)\Video\ArchDays
x64: (x64)\Video\ArchDays
...
<camera id>
...
> = 0
...
0
...
4.7.5 and later
...
Defines whether to store the archive of the specified camera for xxx days.
...
x32: (X32)\Video\ArchHours
x64: (x64)\Video\ArchHours
...
<camera id>
...
> = 0
...
0
...
4.7.5 to 4.10
...
Defines whether to store the archive of the specified camera for not more than xxx hours. This key can be used only if one disk is selected for storing the archive.
Since version 4.10.0 the Store no more than parameter on the settings panel of the Camera object is in use instead of this key.
...
x32: (X32)\Video
x64: (x64)\Video
...
ArchStatus
...
0, 1
...
1
...
4.7.3 and later
...
Defines whether to send current archive status to the Server. This key can be used only if one disk is selected for recording the archive.
...
x32: (X32)\Video
x64: (x64)\Video
...
ArchSync
...
Defines whether data synchronization between Server and Backup archive is enabled or not.
Synchronization is disabled when the value is 0.
When the value is > 0 the key sets maximum imbalance of Backup archive depth between channels in minutes.
By default the key is not created and its value is 1.
The key must be created/modified on the computer corresponding to the Server on the basis of which the Long-term archive object is created
...
0, 1
...
0
4.7.7 to 4.8.10, 4.9.5
...
Defines whether data synchronization between Server and Backup archive is enabled.
When synchronization is enabled, the smaller fragments are sent to the Backup archive until the latest recorded fragment is not copied. After this, newly recorded fragments on this camera are not sent until the same number of fragments is copied from every camera.
The key must be created/modified on the computer corresponding to the Server on the basis of which the Long-term archive object is created
...
x32: (X32)\Video
x64: (x64)\Video
...
Cfg
...
-
...
name
...
4.7.3 and later
...
Sets the name of configuration file.
...
x32: (X32)\Video
x64: (x64)\Video
...
CheckLostFolders
...
0, 1
...
0
...
4.7.3 and later
...
Defines whether to remove old log files from the oldest directory when going to a new disk.
...
x32: (X32)\Video
x64: (x64)\Video
...
Compression
...
0,1
...
1
...
up to 4.8.0
...
Defines whether to check and delete the folders and files that are not in the index.
...
x32: (X32)\Video
x64: (x64)\Video
...
CompressorVersion
...
0 - 255
...
110
...
from 4.7.3 to 4.9.0
...
The parameter defines the compressor version when the recompression is enabled.
55 value corresponds to MJPEG.
110 value corresponds to MotionWavelet.
...
x32: (X32)\Video
x64: (x64)\Video
...
DebugCam.Camera_ ID
...
0, 1
...
0
...
4.7.7 and later
...
0 - logging is disabled
1 - logging is enabled
...
x32: (X32)\Video
x64: (x64)\Video
...
DecompressThread
...
-
...
-
...
...
Key is not active.
...
x32: (X32)\Video
x64: (x64)\Video
...
DecompressWidth<Monitor_number>
...
...
-
...
4.7.3 and later
...
Sets the size of frame starting from which the <Monitor_number> starts partial decompression of video signal. For instance, when the value of the DecompressWidth1 parameter is 3000, the Monitor1 will not decompress all frames that are less than 3000 pixels.
...
x32: (X32)\Video
x64: (x64)\Video
...
Delay
...
...
0
...
up to 4.7.4
...
The key specifies the delay (in ms) of sending video to the camera.
...
x32: (X32)\Video
x64: (x64)\Video
...
Delta
...
0, 1
...
1
...
4.7.3 and later
Allow sending only key frames from Server to Client.
...
x32: (X32)\Video
x64: (x64)\Video
...
Demo
...
0, 1
...
0
...
4.7.3 and later
...
Defines whether the capture cards are in use or video comes from the file.
...
x32: (X32)\Video
x64: (x64)\Video
...
DetectionFps
...
0.3…30
...
2
...
4.7.8 and later
...
Sets the fps of a detection tool.
...
x32: (X32)\Video
x64: (x64)\Video
...
DisconnectInactive
...
0, 1
...
0
...
4.8.0 HotFix
...
Defines whether the Monitor disconnects the gate if the screen is minimized:
1 - disconnect inactive monitors from the Servers (gates, archivers)
0 - support persistent connection
...
x32: (X32)\Video
x64: (x64)\Video
...
DLinkHttpPort
...
...
80
...
up to 4.8.0
...
Port for VitaminControll; DLink from 2000 to 6000 series are compatible with it. The key is not in use.
...
x32: (X32)\Video
x64: (x64)\Video
...
DrawCursor
...
...
0
...
up to 4.8.0
...
The key is not in use.
...
x32: (X32)\Video
x64: (x64)\Video
...
Drv
...
-
...
-
...
up to 4.7.6
...
The key is not in use.
...
x32: (X32)\Video
x64: (x64)\Video
...
EnableSnapShotMode
...
0, 1
...
0
...
4.7.3 and later
...
Triggers camera in the snapshot mode, for Axis and D-link 900, operates with the delay.
...
x32: (X32)\Video
x64: (x64)\Video
...
ExportDir
...
Path to a folder
...
moduledir + "\export"
...
4.7.3 and later
...
Specifies the directory for saving frames and recordings from monitor interface (but not via background export, see AviExport utility).
...
x32: (X32)\Video
x64: (x64)\Video
...
ExportTime
...
> = 0
...
0
...
4.7.3 and later
...
Specifies time (in ms) for exporting snapshot from live video into jpg.
...
x32: (X32)\Video
x64: (x64)\Video
...
Filter.Exclude
...
Event name
...
not created
...
up to 4.8.0
...
Excludes the events. Format: Filter.Exclude.event_ID. The parameter value is the name of the event to be excluded. Example:
"Filter.Exclude.0"="MD_INFO"
"Filter.Exclude.1"="MD_START"
...
x32: (X32)\Video
x64: (x64)\Video
...
FreeMB
...
> 0
...
1000
...
4.7.3 to 4.9.5
...
Sets free space in the section while storing the archive; when the limit is reached the earliest recordings will be deleted on loop.
...
x32: (X32)\Video
x64: (x64)\Video
...
FreeMbCritical
...
>0
...
100
...
4.8.4 to 4.9.5
...
Specifies free space in the section while loop recording.
...
Specifies free space in the section while loop recording of reserve archive which is not in use for storing reserve archive and can be in use for recording temporary files. If key is not created, the value created by the FreeMB key is in use.
...
x32: (X32)\Video
x64: (x64)\Video
...
GateNoRec
...
0, 1
...
0
...
4.7.3 and later
...
Defines whether the gate performs recording to the archive.
...
x32: (X32)\Video
x64: (x64)\Video
...
Hide
...
0, 1
...
1
...
4.7.3 and later
...
Defines whether the "Hide Monitor" button is visible or hidden:
0 – hidden,
1 - visible.
...
x32: (X32)\Video
x64: (x64)\Video
...
HideMask
...
0, 1
...
0
...
4.7.3 and later
...
Defines whether to hide the image with the mask filled with black.
...
x32: (X32)\Video
x64: (x64)\Video
...
Hubslowspeed
...
0, 1
...
0
...
4.7.3 and later
...
For wavehub. Affects fps. Slows down the multiplexer stepping rate.
...
x32: (X32)\Video
x64: (x64)\Video
...
HWCompression
...
-
...
3
...
...
The key is not in use.
...
x32: (X32)\Video
x64: (x64)\Video
...
Index
...
-
...
2
...
4.7.3 and later
...
Shows whether file indexing is in use.
The value is not to be modified as file indexing is always in use.
...
x32: (X32)\Video
x64: (x64)\Video
...
InfinityAutoturn
...
-
...
-
...
up to 4.7.6
...
Defines on what Infinity cameras the autoturn is to be enabled (camera IDs are specified and separated by commas).
...
x32: (X32)\Video
x64: (x64)\Video
...
IPCamPort
...
0 -65535
...
80
...
up to 4.7.6
...
Port for IP cameras; action available: connect via the specific port.
...
x32: (X32)\Video
x64: (x64)\Video
...
IsPeriod
...
0, 1
...
0
...
4.7.3 and later
...
x32: (X32)\Video
x64: (x64)\Video
...
Layout
...
-
...
-
...
4.7.3 and later
...
The key cannot be modified.
...
x32: (X32)\Video
x64: (x64)\Video
...
LH_Timeout
...
5-2147483647
...
5
...
4.7.3 and later
...
Time in seconds on the expiry of which it is considered that there is no connection with Linux Hub. Default value - 5 seconds.
Time interval is calculated by formula (LH_Timeout*1000/5) ms, for reconnections to Linux Hub: the more the value the more unlikely the video stream reconnects to LH.
...
x32: (X32)\Video
x64: (x64)\Video
...
ManualBrightnessControl
...
0, 1
...
1
...
4.7.7
...
Defines the way of brightness and contrast control for IP cameras:
1 - enable the manual brightness and contrast control;
0 - brightness and contrast are set in the camera interface.
...
x32: (X32)\Video
x64: (x64)\Video
...
MaxFrames
...
500-10000
...
500
...
4.7.3 and later
...
Sets the number of frames in the file.
...
x32: (X32)\Video
x64: (x64)\Video
...
Missed
...
0 - 2,147,483,647
...
Depends on the "mode" parameter of the video capture card
...
4.7.3 and later
...
Sets the video digitization rate. By default the rate is the same as for the video capture card.
...
x32: (X32)\Video
x64: (x64)\Video
...
Mobile
...
-
...
0
...
up to 4.7.6
...
The key is not in use.
...
x32: (X32)\Video
x64: (x64)\Video
...
Monitor<monitor id>_cw
...
>=0
...
...
4.8.3
...
Sets the number of cameras across (the "All cameras" button).
...
x32: (X32)\Video
x64: (x64)\Video
...
monitor<monitor id>_ch
...
>=0
...
...
4.8.3
...
Sets the number of cameras vertically (the "All cameras" button).
...
x32: (X32)\Video
x64: (x64)\Video
...
monitor<monitor id>_w43
...
>=0
...
4
...
4.8.3
Sets the frame width (against the frame height).
...
x32: (X32)\Video
x64: (x64)\Video
...
monitor<monitor id>_h43
...
>=0
...
3
...
4.8.3
...
Sets the frame height (against the frame width).
...
x32: (X32)\Video
x64: (x64)\Video
...
NewCompressor
...
0, 1
...
1
...
4.7.3 and later
...
Defines whether to use a new motionWavelet compressor:
0 - an old decompressor is in use;
1 - a new multistream one is in use.
...
x32: (X32)\Video
x64: (x64)\Video
...
NewMD
...
0, 1
...
0
...
4.7.6 and later
...
Defines whether to use a new motion detection tool.
...
x32: (X32)\Video
x64: (x64)\Video
...
Noallcamsbutton
...
0, 1
...
0
...
4.7.3 and later
...
Defines whether to show the "All cameras" button on the screen.
...
x32: (X32)\Video
x64: (x64)\Video
...
NoLayoutControl
...
0, 1
...
0
...
4.7.5 and later
...
Disables F1 and F2 hotkeys (monitor ratio).
...
x32: (X32)\Video
x64: (x64)\Video
...
No_main_panel
...
0, 1
...
0
...
4.7.3 and later
...
Defines whether to display control panel on the monitor.
...
x32: (X32)\Video
x64: (x64)\Video
...
Nosign
...
0, 1
...
0
...
4.7.6 and later
...
Disables encryption of the digital signature to the frame.
...
x32: (X32)\Video
x64: (x64)\Video
...
OldDriver
...
KV1999
KV2000
KV2001
KV2002
KV2003
...
Empty string
...
4.7.3 and later
Support for old ISS cards.
...
x32: (X32)\Video
x64: (x64)\Video
...
Oldxeon
...
0, 1
...
0
...
4.7.6 and later
Support for old Xeon processors.
...
x32: (X32)\Video
x64: (x64)\Video
...
Onevideoout
...
0, 1
...
0
...
4.7.3 and later
...
Defines whether video outs are combined on the FS6 video capture card.
...
x32: (X32)\Video
x64: (x64)\Video
...
OnlyServerConnection
...
0, 1
...
0
...
up to 4.7.6
...
If the video gate is a recording one, then it is possible to enter the archive mode by the short click.
...
x32: (X32)\Video
x64: (x64)\Video
...
Overlay
...
-
...
1
...
up to 4.7.6
...
The key is not in use.
...
x32: (X32)\Video
x64: (x64)\Video
...
PostAlarmTime
...
>= 0
...
2
...
4.7.3 and later
...
Sets time (sec) on the expiry of which the alarm by detection tool on Axis IP cameras is not recorded.
...
x32: (X32)\Video
x64: (x64)\Video
...
PreCompress
...
0, 1
...
1
...
Defines whether to compress pre-recorded video.
...
x32: (X32)\Video
x64: (x64)\Video
...
PrintFontSize
...
Any
...
0
...
Sets the font size for printing.
...
x32: (X32)\Video
x64: (x64)\Video
...
PriorityClass
...
256,
128,
32768,
32,
16384,
64
...
16384
...
up to 4.8.0
...
Defines the stream priority:
256 - realtime
128 - high
32768 - Above Normal
32 - normal
16384 - below Normal
64 - low
...
x32: (X32)\Video
x64: (x64)\Video
...
Rbapp
...
-
...
-
...
4.7.3 and later
...
Specifies the path to the app run by right-click in the monitor.
...
x32: (X32)\Video
x64: (x64)\Video
...
IndexRebuilding
...
0, 1
...
0
...
4.7.6 and later
...
Is used when index is being rebuilt. If the system detects IndexRebuilding=1 at start, then index is immediately rebuilt without trying to read idx files.
...
x32: (X32)\Video
x64: (x64)\Video
...
ReCompressMedia
...
0, 1
...
0
...
from 4.7.3 to 4.9.0
...
Defines whether to enable recompression of video from IP camera (recompress data from IP camera into wavelet).
...
x32: (X32)\Video
x64: (x64)\Video
...
Remote_delta
...
-
...
-
...
up to 4.7.6
...
The key is not in use.
...
x32: (X32)\Video
x64: (x64)\Video
...
RestoreMode
...
0, 1
...
1
...
from 4.7.4 HOTFIX
...
Defines whether to quit the archive upon time-out.
...
x32: (X32)\Video
x64: (x64)\Video
...
ShowDate
...
0, 1
...
0
...
from 4.7.3 to 4.8.6
...
Defines whether to show the date on the video.
...
x32: (X32)\Video
x64: (x64)\Video
...
ShowID<Monitor_number>
...
0, 1
...
1
...
4.9.0 to 4.10.1
...
Defines whether to show the Camera ID on the button to open Camera context menu.
Example: ShowID3=0 – the camera number will not be displayed in context men for the third Monitor.
...
x32: (X32)\Video
x64: (x64)\Video
...
ShowName<Monitor_number>
...
0, 1
...
0
...
4.7.3 to 4.10.1
...
Defines whether to show the Camera name on the monitor.
...
x32: (X32)\Video
x64: (x64)\Video
...
ShowTime<Monitor_number>
...
0, 1
...
1
...
4.7.3 to 4.10.1
Defines whether to show the Time on the monitor.
...
x32: (X32)\Video
x64: (x64)\Video
...
ShowTitle
...
0, 1
...
0
...
4.7.3 to 4.10.1
...
Defines whether to show the monitor name instead of the time on the control panel.
...
x32: (X32)\Video
x64: (x64)\Video
...
x32: (X32)\Video
x64: (x64)\Video
...
x32: (X32)\Video
x64: (x64)\Video
...
Sigma
...
-
...
35
...
up to 4.7.6
...
Compressor setting.
...
x32: (X32)\Video
x64: (x64)\Video
...
SnapShotTime
...
> 0
...
1
...
4.7.3 and later
...
Sets time (sec) between snapshots.
...
x32: (X32)\Video
x64: (x64)\Video
...
Speaker
...
-
...
-
...
up to 4.7.6
...
The key is not in use.
...
x32: (X32)\Video
x64: (x64)\Video
...
Threshold
...
-
...
1500
...
up to 4.7.6
...
Compressor setting.
...
x32: (X32)\Video
x64: (x64)\Video
...
TMDCorrellation
...
1-100 %
...
30
...
4.7.6 and later
...
Permissible minimum similarity between frames when they are considered to coincide. 100% for completely identical frames.
...
x32: (X32)\Video
x64: (x64)\Video
...
TMDNonCorrectionStop
...
> = 0
...
1
...
4.7.6 and later
...
Number of incoming frames from PTZ camera upon STOP command; the decision to stop pointing (if there is no command to start motion) is made.
...
x32: (X32)\Video
x64: (x64)\Video
...
TMDSpeed
...
-
...
3
...
up to 4.7.6
...
The key is not in use.
...
x32: (X32)\Video
x64: (x64)\Video
...
TMDSpeedCutoff
...
0..∞
...
15
...
4.7.6 and later
...
Sets the limiting value of speed for camera with automatic centering.
...
x32: (X32)\Video
x64: (x64)\Video
...
TMDTolerance
...
-
...
50
...
4.7.6 and later
...
Sets pointing accuracy (zone of tranquility). Corresponds to the value of area around stop point of PTZ camera (px).
...
x32: (X32)\Video
x64: (x64)\Video
...
UseConfigureByWeb
...
0, 1
...
0
...
4.7.3 and later
...
Defines whether to use IP camera settings. When this key is enabled, the driver will try not to change parameters set on the camera. But behavior depends on specific camera+driver version+firmware combination.
...
x32: (X32)\Video
x64: (x64)\Video
...
UseCompression.
...
0, 1
...
1
...
4.7.3 and later
...
Defines whether video compression is in use (UseCompression.camera ID).
...
x32: (X32)\Video
x64: (x64)\Video
...
UseLowRefFramesFpsFix
...
0, 1
...
1
...
4.7.8 and later
...
Enables stream decompression with low key frame fps. Threshold fps value = 2.
...
x32: (X32)\Video
x64: (x64)\Video
...
VideoDumpMode
...
0, 1, 2
...
0
...
4.7.8 and later
...
Sets the mode of video dump:
1 – provide all data;
2 – provide data about only those frames that caused errors or decoder failure while being decoded.
...
x32: (X32)\Video
x64: (x64)\Video
...
VideoDumpPath
...
-
...
Intellect/ FrameDump
...
4.7.8 and later
...
Path to the folder where frames are stored.
...
x32:
(x32)\LMCGate
x64: (x64)\LMCGate
...
ExportFrequency
...
-
...
-
...
up to 4.7.6
...
Sets time (sec) for updating buffer.
...
x32:
(x32)\LMCGate
x64: (x64)\LMCGate
...
EnableExport
...
0, 1
...
-
...
up to 4.7.6
Defines whether frame buffer is enabled.
...
x32:
(x32)\LMCGate
x64: (x64)\LMCGate
...
ExportPath
...
-
...
-
...
up to 4.7.6
...
Value is the path to the folder with exported frames.
...
x32: (X32)\Video
x64: (x64)\Video
...
AdaptiveStream
...
0, 1
...
-
...
4.8.3HotFix
...
The key can be used with multistream cameras only.
1 - video stream is transmitted over the network if video from this camera is required. If video is not displayed on the Client, then the there is no stream from the camera and the network is not loaded.
Important! When the value of the key is 1, video is not recorded to the archive when the Video surveillance monitor is hidden. But recording is not stopped. In the result video archive fragment the period over which the Video surveillance monitor was hidden will look like a freeze frame.
0 - video stream is transmitted over the network regardless of whether video from this camera is required or not.
...
x32: (X32)\Video
x64: (x64)\Video
...
ExtractWidth
...
0, 1
...
-
...
4.8.4
...
0 – partial decompression for MotionWavalet is disabled (stream from cameras is enhanced).
1 – partial decompression is enabled.
...
x32: (X32)\Video
x64: (x64)\Video
...
TelemetryMouseWheel
...
0, 1
...
-
...
4.8.4
...
0 - digital image zooming and Telemetry zoom are performed using the mouse as described in ‘Intellect software package. Operator guide’.
1- digital zooming is performed scrolling the mouse wheel and pressing the Ctrl key. Telemetry zoom is controlled using the mouse wheel: when the wheel is scrolled, ZOOM_IN(ZOOM_OUT) commands are performed; the last mouse click performs ZOOM_STOP command.
...
x32: (X32)\Video
x64: (x64)\Video
...
ExportFontAdaptive
...
0, 1
...
-
...
4.8.7
...
The key sets the relative font size for titles (camera N and time) when the frame is exported:
0 - by default (no key). The size of titles stays the same when the frame is exported (regardless of resolution).
1 - the size of titles is scaled depending on resolution when the frame is exported.
...
x32: (X32)\Video
x64: (x64)\Video
...
ClientArchMessage
...
0, 1
...
-
...
4.9.0
...
The key is in to enable the following events for MONITOR object:
ARCH_ENTER - enter the archive;
ARCH_EXIT - exit the archive;
ARCH_FRAME_TIME - time of the frame (second is changed).
...
x32: (X32)\Video
x64: (x64)\Video
...
DrawDetectorNumbers
...
0, 1
...
-
...
4.8.7
...
0 – identifiers of tracking objects are not displayed in the viewing tile (by default).
1 – identifiers of tracking objects are displayed in the viewing tile.
...
x32: (X32)\Video
x64: (x64)\Video
...
DrawDetectorColors
...
0, 1
...
-
...
4.8.7
...
The key sets the color of the frame that marks out the tracking object in the viewing tile:
0 – white color.
1 – the color is calculated as the mean value in the area marked out with a frame.
...
x32: (X32)\Video
x64: (x64)\Video
...
FaceCamOffset
...
>0
...
50000
...
from 4.8.8 to 4.9.7
...
The key specifies the max. possible camera identifier in the system. The bigger values are used for the face detection tool.
...
x32: (X32)\Video
x64: (x64)\Video
...
FontCamNameHeight
...
>=10
...
10
...
4.8.8
...
The key specifies the font size of the camera name when displaying it on the Video surveillance Monitor.
...
x32: (X32)\Video
x64: (x64)\Video
...
FontCamTimeHeight
...
>=10
...
10
...
4.8.8
...
The key specifies the font size of the camera time when displaying it on the Video surveillance Monitor.
...
x32: (X32)\Video
x64: (x64)\Video
...
ShowFileNameInTitles
...
0, 1
...
0
...
4.9.0
...
The key is used to add the name of the file to the titles using the virtual video device:
0 - the name of the file is not shown in the titles;
1 - the name of the file is shown in the titles (the Captioner object is to be created).
...
x32: (X32)\Video
x64: (x64)\Video
...
CorrectFrameNumber
...
0, 1
...
1
...
4.9.0
...
1 – key redefines frame numbers when archive is played back by Axxon_player.exe if frames are recorded to the archive with incorrect number.
0 – key in not active, frames are played in the order corresponding to their numbers in archive.
...
x32: (X32)\Video
x64: (x64)\Video
...
Key specifies time-out in seconds after which “Disappearance in zone” detection alarm is discarded.
...
x32: (X32)\Video
x64: (x64)\Video
...
Key specifies time-out in seconds which defines the duration of object appearance in zone, after which “Appearance in zone more than 10 sec” detection tool triggers.
...
x32: (X32)\Converter
x64: (x64)\Converter
...
The key allows decreasing time of exporting video in the avi format using the Converter.exe. utility. If the key value is 0, then resolution check is disabled when exporting video in the avi format. If resolution check is disabled, then frames are not decompressed when being exported, but when resolution is changed, video artifacts can appear.
...
The key enables frame skip when there is fast playback of the archive in the h264 format.
0 – frame skip is disabled. If the fps value comes up to 50, the frame skip will be enabled regardless of the FastPlayMpegSkip key.
1 – only key frames are played back.
2 (only 4.9.7) – frame skip at fast playback is disabled regardless the fps value.
Note. It is also possible to configure frame skipping while playing back the archive – see also info on MonitorSkipArchFramesEnable registration key.
...
The key specifies the number of frames to buffer when displaying live video from IP cameras. The value of 5 is recommended.
...
The key enables channel limitation for FX4 card.
1 – the limitation is enabled. It is not possible to set the channel number that is bigger than it is provided by the card.
...
The key enables channel limitation for FX6 card.
1 – the limitation is enabled. It is not possible to set the channel number that is bigger than it is provided by the card.
...
The key specifies the value of optical zoom duration (delay) in milliseconds.
...
The key is for operaton of cameras via the ONVIF protocol in the compatibility mode. It is used when the ONVIF protocol is partially supported by the camera. The key enables the compatibility mode for all cameras in the system.
...
TelemetryPointAndClickDelay
...
Sets the interval (in milliseconds) between sending Point&Click commands when controlling PTZ via surveillance monitor by clicking and holding left mouse button and the Ctrl key. See details in Operator's Guide.
...
The parameter is used for loop recording of Server archive in order to store the number of current disk for recording. The figures in ascending order correspond to the letters of the sections (e.g., 0=C, 1=D, 2=E etc.). If the parameter has not been created, then it is created at the moment of selecting the disk for recording the archive with the value of disk number which has the latest recorded archive fragment. When filling the disk, the parameter increases by 1.
...
The parameter is used for loop recording of Server archive. If the parameter has not been created, then it is created at the moment of selecting the disk for recording with the default value. When going to the new disk, the parameter value changes as follows:
- When there is the archive on the disk, then the m_dwTime[FS] parameter equals the date of the latest recorded fragment. If the disk is empty (there is no archive on it), then the parameter’s value is the default one.
The recording will be performed on the current disk until the file with the date specified in the m_dwTime[FS] key becomes an old one on this disk (if the disk wasn’t primarily empty) or until the remaining free space on the disk becomes equal to that specified by the user (if the disk was primarily empty, see The settings panel for the Video subsystem section). Further the system will erase this file and go to the next disk.
...
The parameter is used for loop recording of Backup archive. The parameter is similar to the m_nCurVolume[FS] parameter.
...
The parameter is used for loop recording of Backup archive. The parameter is similar to the
...
The key is not created by default, i.e. the value is 0.
The key defines the playback speed if the playbeck is paused and then resumed at fast archive playback:
0 – playback will be resumed with the same speed as before pause.
1 - playback will be resumed with normal speed.
...
The key allows disabling the control of optical zoom function by mouse buttons.
0 – control of optical zoom by means of long pressing of left or right mouse buttons is not functioned.
1 - control of optical zoom by means of long pressing of left or right mouse buttons is functioned.
...
Sets max. time interval at the end of which the following frame is sent through the video gate.
...
When the value = 1, the key enables displaying information on fps in the first line of captions on the video image in the Viewing tile.
...
After using frame-by-frame reverse playback, when returning to the normal playback mode:
0 – playback starts from the nearest previous key frame.
...
Comma-separated IDs of cameras in Intellect, or *
Note. Use all instead of * value in versions up to 4.9.8
...
Camera sets time of frame while video image transmission after which frames playback by turn depending on the time of frame. Sometimes camera sets incorrect time, so frames playback in invalid order because of bad communication quality or time of camera is not synchronized with server.
The key sets list of IP-cameras for which time of frame will be set according to system time of the Intellect server while reading frames from the network.
Note. The key can be used for cameras with absolute time (e.g. Tattile cameras). Other cameras synchronize with server time on default.
Example. When the value of registry key is “1,10,135”, time of Server will be applied on cameras 1, 10 and 135.
If value of key is * then server time will be applied for all cameras. In Intellect 4.10.0 and later this value is considered as the value by default and is in use if the key is not created.
...
4.9.5
DP 3.2.30
...
The key sets the number of key frames decompressed by MxPEG decompressor before they are returned. The waiting period of specified frames is 3 minutes, on the expiry of this period the decompressor is reinitialized.
...
0 – previously used Mouse PTZ control mode is in use.
1 – a new Mouse PTZ control mode is in use.
...
Most significant byte - 4 = 0.
byte 3 - R (0..255)
byte 2 - G (0..255)
byte 1 - B (0..255)
Examples:
blue color: LetterboxBackgroundColor = 255
white color: LetterboxBackgroundColor = 16777215
...
In the Continous mode camera lens is re-focused slowly – arrow indicating the re-focus direction smoothly follows the pointer. To use the Continous mode, the camera is to support this mode.
...
The key enables frame skipping while playing back the archive.
0 – all frames are displayed. If there is lack of resources, video delays and loss of synchronization with sound are possible, and the playback speed can be increased no more than 4 times (or no more than 60 fps).
...
- Version 4.10.2 and older: only key frames are played back at rate x4 and faster.
- Version 4.10.3 and later: only key frames are played back forward at rate x10 and faster and backwards at rate x6 and faster.
...
from 4.9.5 to 4.9.7
from 4.10.1
...
4.9.6 - 4.9.7
...
The key specifies the path to the existing folder that will be used as a buffer while recording to the archive, e.g., C:\Temp. Temporary files with the name in the writing._<camera_id> format are created in the specified folder while recording. If the key hasn’t been created, then such temporary files are created in the VIDEO folder on a disk with the archive.
Important! When 64-bit modules are in use (see Configuring of using 64-bits modules) the key is ignored by the system and temporary files are created in RAM.
When the recording is completed these files are renamed and moved to the folder with the archive according to the rules of archiving (see General information on video archiving).
This key can be used when, for example, the archive is recorded to the net disk, but disk performance is not enough and it can’t record new files and/or delete previous recordings recorded on loop.
If in the key the path to a non-existing folder or a folder created after starting Intellect is specified, then the buffer is not in use.
In the TempWritingDir folder there must be MORE free space, than maximum size of temporary files that are stored in it, i.e. the folder must NEVER be filled for 100%.
There should be not less than 100 Mb of free space in TempWritingDir folder.
...
The key is for enabling and disabling titling on the video image using the SC590N4 video capture device.
0 – OSD-captions of device are in use.
1 – OSD-captions of device are not in use.
...
On default the key is not created that corresponds to value 0.
The key is for separating VMDA tracker processes to the single process. It's recommended to do to increase stability and reliability of the Intellect basic functional. Used CPU resources and memory are increasing while separating trackers to the single process.
0 – process of VMDA trackers is starting in the video.run process.
1 – process of VMDA trackers is starting in the single detector_ext.run process.
...
x32: 100
x64: default value is a maximal video length in frames (on default 500)
...
The key sets number of frames storing in RAM until start of data record to buffer. The key can be used with any codec.
...
The key is for changing the way of deleting archive of events at the end of storage period (see Configuring events logging):
1 – storage period is counted from the current PC time. So if there are events "from the future" (date of which is later than the current date) in the archive of events, they are neither taken into account when deleting old entries nor deleted.
0 – storage period of records is counted from the date of creation the newest record.
...
The key specifies the way of archive record to disk or network storage:
0 – each frame is recording to disk at once. This value is not recommended to use for network storages.
1 – at first video is recording to RAM (default video size is 500 frames, it's specified by the Ring parameter on the Settings panel of the Video subsystem section of the Tweaki.exe utility), temporary files are not created. Video will record on disk after its completion. When the recording ends, it is written to the disk in parts, the size of which is set by the WriteBufferSize parameter (1 MB by default). Memory consumption is highly increasing in this case.
...
The key specifies the size of video data chunk that is written to the disk at a time, in megabytes. If the frame size is less than the preset value, then it "merges" with the next one.
The key is used when the value of the MemFile key is 1 or -1.
...
Font size of captions with camera name and time while export from the Monitor.
...
The key is designed to enable and disable showing a cross in the center of Surveillance monitor during PTZ control.
1 – the cross is shown in the center of Surveillance monitor during PTZ control.
...
The key is designed to enable saving titles separately from video.
1 – titles are saved in files of *.t01 type separately from video. If there is time stamp in the titles, then these titles are not displayed in live video, but can be seen in the archive (for the corresponding period of time). Titles with no time stamp are displayed on live video
...
The key allows forbidding change of export catalogue when the archive period is exported and when the archive is exported using the AviExport utility.
1 – export catalogue change is forbidden.
0 – export catalogue change is allowed.
...
The key is used to disable creating and editing of bookmarks meant for protection against video rewriting (see Create a bookmark).
1 – show Create and View bookmarks buttons.
...
The key is used to disable export of bookmarks meant for protection against video rewriting (see List of bookmarks).
1 – show bookmark export button.
...
The key sets the width of frame for printing:
1 – the frame is printed out so that is fits the full width of the page depending on the default layout (portrait or landscape).
...
The key enables paging by layouts.
0 – standard paging.
...
The key is in use for enabling compressor and decompressor on the settings panel of the Camera object.
0 – Compressor and Decompressor parameters are not available for changing.
...
The key sets the order of playing back files when the virtual grabber is in use:
...
Enables restarting record on archive entering.
1 – patch that has been recorded on archive entering is stopped and a new one starts. As a result the user who enters the archive sees a freeze frame corresponding to that on exiting.
0 – recording is not stopped on archive entering
The key is to be created on a Server.
...
Enables restarting record on archive entering and sets time period in seconds (0 or more) to roll back from current time at archive entering and start playback from. All frames are forced to be recorded to the disk at archive entering, taking into account the pre-alarm recording.
-1 – disabled (by default).
Note. The key is to be created on a Server.
...
Note. If every 20th frame is a key frame, entering archive can take up to 2-4 sec., as all frames are warranted to be recorded on disk yet it is possible only if the key frame for the next clip is received in order to avoid gaps in the archive.
...
1 – the Pause button is pressed on archive entering, archive navigation using arrow keys.
0 – the Pause button is not pressed on archive entering.
The key is to be created on a Server.
...
0
1
...
4.9.9 -
4.10.2
4.10.4 and later
...
The key enables fast index download. It is in use for 64-bit modules only as memory usage increases while reading and saving.
Non-depending on the key value the fastIndex.index file is created in the VIDEO folder - using this file indexes are downloaded much faster.
0 – when Intellect is started all indexes are downloaded, so no time is wasted for data loading.
1 – when Intellect is started the specified file is downloaded and data on detailed index for an hour will be loaded if required.
...
The key changes the playback by alarms control mode in the Video surveillance monitor:
0 - long left-click starts continuous playback of archive fragments, short click starts playback of the current selected archive recording only.
1 - long left-click starts playback of the current selected archive recording only, short click starts continuous playback of archive fragments.
...
The key enables control of the playback speed of the archive in the Video surveillance monitor and pausing/resuming playback using the mouse wheel.
0 - playback speed control using the mouse wheel is possible only when the cursor is hovered over the playback control panel. When hovering the cursor over the video, the mouse wheel controls the zoom. Clicking on the mouse wheel is used to control the telemetry (autocentering).
1 - playback speed is adjusted using the mouse wheel while hovering the cursor over the Surveillance window. Clicking the mouse wheel pauses/resumes video playback.
...
The key disables video data transmission from the Server to the Videogate when video data via this Videogate is not requested on the Clients. The key is to be created on the computer under which the Videogate object is created.
0 - video is transmitted from the Server to the Videogate constantly.
...
The key enables transforming the Surveillance window into the single layout mode by left double-clicking. The key is created on the computer where the video is displayed and the described behavior of the video surveillance monitor is required.
0 - by left double-clicking the size of the Surveillance window is increased by one layout.
1 - by left double-clicking the size of the Surveillance window is increased to a single layout (only the selected Surveillance window is displayed in the Video surveillance monitor). Right double-clicking on the Video surveillance monitor restores the original layout.
...
The key is used together with the MaximizeCameraOnDblClk = 1 key and it enables returning to the original layout after enlarging the video surveillance window by left double-clicking. The key is created on the computer where the video is displayed and the described behavior of the video surveillance monitor is required.
0 - returning to the original layout is performed by right-clicking the Surveillance window.
1 - returning to the original layout is performed by left-clicking the Surveillance window.
...
The key allows not changing the video surveillance mode of the active camera (archive or live video) when changing the layout and adding or removing cameras to the Video surveillance monitor.
0 - when adding a new camera to the Video surveillance monitor and when removing cameras from it, the active camera switches into the live video viewing mode.
1 - when adding a new camera to the Video surveillance monitor and removing the cameras from it, the active camera does not change the video surveillance mode (archive or live video).
...
The key defines if it is necessary to delete cameras from Video Surveillance Monitor list when the Camera object is deleted.
1 – the Camera is deleted from the Monitor list on deletion.
0 – the Camera is not deleted from the Monitor list on deletion. If the Camera object with the same ID is created again, it automatically appears in the Monitor list.
...
The key can be created to prohibit moving the Video Surveillance Windows on the layout in the Video Surveillance Monitor (either when the Control Panel is enabled or disabled).
0 – changing the position of the Video Surveillance Windows on the layout is allowed.
1 – changing the position of the Video Surveillance Windows on the layout is prohibited.
...
The key enables the user redirection to the "edge storage" after pressing the Enter archive button.
0 - after pressing the Enter archive button, the user is redirected to the video archive.
1 - after pressing the Enter archive button, the user is redirected to the "edge storage" if there is one, and if it is connected to the camera in the Video Monitor.
The key should be specified on those computers where this option is required.
...
The key sets the Play button hold time in milliseconds to enable the continuous video archive playback on the touch screen.
...
Using this key you can hide the "no disk" icon from being displayed in the Monitor if no disk is selected for recording.
0 – if no disk is selected for recording, the "no disk" icon is not shown.
1 – if no disk is selected for recording, the "no disk" icon is shown in the Monitor.
Note. You should use this key on all computers where the "no disk" icon has to be hidden from being displayed in the Monitor.
...
0 – if enabled, PTZ control remains active after you hide its window or switch to another screen.
1 – if enabled, PTZ control becomes inactive after you hide its window or switch to another screen; you can re-activate it manually.
Refer also to Mouse PTZ control.
...
This key disables ActiveX's (refer to CamMonitor.ocx ActiveX Control) video stream recalculation to fit the display window and forces video display in its native resolution. Therefore, when you export a frame from an ActiveX window called from the Event Log or the Web Reports subsystem, you'll get full resolution frame from either live video or stored footage.
0 – ActiveX optimizes the video resolution to its window size.
1 – ActiveX displays video in its native resolution.
...
This key allows flipping the camera icon on the map while you rotate it.
0 – standard behavior.
1 – the Map receives panning value as CAM|XXXX|UPDATE_ABSOLUTE which flips the camera icon while you rotate it.
...
This key affects the allocation of virtual memory in multi-CPU systems.
0 – uniform allocation of virtual memory.
1 – NUMA allocation for optimal distribution of CPU load between multiple CPUs within a PC.
Note. Before changng this key, please consult your AxxonSoft manager.
...
0 - during the playback, the video archive fragments are read into RAM by one frame.
1 - during the playback, the video archive fragments are read into the RAM all at once.
...
The key disables storing captions in the captions database:
0 – the captions are saved in the captions DB.
1 – the captions are not saved in the captions DB.
...
<Grabber name.MaxChannels>
For example: RTSP.MaxChannels, HikVision(h.264).MaxChannels
Note. Both new and old grabber names are supported. The comparison is case sensitive.
...
Audio | |||||
Registry section | String parameter | Available values | Default | Product version | Parameter in effect |
x32: (X32)\Audio | Gain_control | 0, 1, 2 | - | up to 4.7.6 | Sets the volume control parameter: 0 - no volume control; 2 - extra accuracy (CPU overload is possible if there are a lot of channels). |
x32: (X32)\Audio | Max_file_len_sec | > = 0 | 600 | 4.7.4 and later | Defines max. length of audio file (sec) when recording via audio player. |
x32: (X32)\Audio\
| mix | 0, 1 | 0 | 4.7.4 and later | Sets input mixing. |
| x32: (x32)\Audio x64: (x64)\Audio | AudioStreamLoggerEnable | 0, 1 | 0 | 4.9.8 and later | 0 – logging is disabled. 1 or other value different from 0 – streams logging is enabled. The module restart is not required to change the key value. |
Core | |||||
Registry section | String parameter | Available values | Default | Product version | Parameter in effect |
x32: (x32) | ChangePort | > = 0 | Depends on the port specified for the Client. | 4.7.3 and later | Allows changing the port number. For instance, if it is necessary to change port 20900 to 40900, then 20900="40900" string parameter is created. |
x32: (x32) | CheckPingPeriod | > 0 | 10 | 4.7.4 to 4.10.2 | Sets Server-computer ping period. Note. In Intellect since version 4.10.3 this parameter is set on the settings panel of the Security zone object. |
x32: (x32) | CheckVersion | 0, 1 | 0 | 4.7.4 and later | Sets the parameters of Server connection: the version is checked in connected version parameters. If versions do not agree, then there is a corresponding message and no connection. |
x32: (x32) | Core IP Address | IP address | - | 4.7.3 and later | Address of the computer to the core of which the slave.exe is to connect. |
x32: (x32) | DBAttempts | 1..∞ | 10 | 4.7.3 and later | Number of attempts to connect to database. |
x32: (x32)\Debug | DebugLevel | 0,1,2,3,4 | 0 | 4.7.3 and later | Sets the debug mode: 1 – information is shown in the process window; 2 – information is shown in the process window and logged; 3 – extended log is written – it contains module events; 4 – extended log is written – it contains module events and parameters. |
x32: (x32)\Debug | DebugExtension | Any string | LOG | 4.7.3 and later | Sets extensions of log files. |
x32: (x32)\Debug | DebugFlushPeriod | > = 0 | 500 | 4.7.4 and later | Sets the update rate for log files (ms). |
x32: (x32)\Debug | DebugOptions | Range in decimalsystem: 0-255. | 0x001 (i.e. 1) | 4.7.3 and later | Hexadecimal logging in the debug mode. This parameter has a complex structure (bit mask) and it is modified using the Tweaki.exe utility. |
x32: (x32)\Debug | DebugQueueMaxLines | 0 - 2147483647 | 2000 | 4.7.4 and later | Specifies max. number of messages in a queue to log file. If there are more than 500 log lines in the queue, then they are to be scaled. |
x32: (x32)\Debug | DebugSize | >=100 | 100 | 4.7.3 and later | Specifies the number of megabytes provided for log. Restricted by disk capacity. |
x32: (x32)\Debug | DebugTime | 0-2147483647 | 48 | 4.7.3 and later | Specifies the number of hours for keeping log files. |
| x32: (x32)\Debug x64: (x64)\Debug | DebugZipDays | >0 | 2 | 4.7.5 and later | Specifies the number of days for keeping log files in the gz format. |
x32: (x32) | defaultconnection | 0, 1 | 1 | 4.7.4 and later | Allows setting connections in the architecture only with the computer where the Computer object is created. |
x32: (x32) | DisableProtocol | 0, 1 | 0 | 4.7.3 and later | Allows disabling protocol. |
x32: (x32) | DisableThreadStatQueue | 0, 1 | 0 | 4.8.0 and later |
By default the key is not created.
Defines whether the queue statistics is called or not. If the registry key value=1, then the box can not be called.
To call the Queue statistics box, follow the steps:
|
x32: (x32) | InstallFolder |
| Intellect | 4.7.3 and later | Specifies the installation folder. |
x32: (x32) | Ip_port | 0, 1 |
| up to 4.7.6 | Specifies the port using which the IP camera will operate on the Computer object. |
x32: (x32) | Language | 0x0419 | - | 4.7.3 and later | Specifies the language to use (0x0419 - English). |
x32: (x32) | LogIncommingMsg | 0, 1 | not created | up to 4.8.0 | Defines whether logging of incoming events is enabled or not. |
x32: (x32) | LogOutgoingMsg | 0, 1 | not created | up to 4.8.0 | Defines whether logging of outgoing events is enabled or not. |
x32: (x32) | LogStatistics | 0, 1 | not created | up to 4.8.0 | Defines whether the statistics is logged or not. |
x32: (x32) | OnlyLocalProtocol | 0, 1 | 0 | 4.7.3 and later | Only local events are logged. |
x32: (x32) | PeakWorkingSetSizeQuota | >=0 | 0 | 4.8.1 and later | Sets RAM limit (MB). When this limit is exceeded, the module that exceeded this limit will be restarted in the restart service. |
x32: (x32) | PhotoCores | Name or IP address | - | 4.7.3 and later | The list of computers (cores) for mailing user photos. |
x32: (x32) | PriorityClass | 256, 128, 32768, 32, 16384, 64 | 16384 | 4.7.3 and later | Defines the stream priority: 256 - realtime 128 - high 32768 - Above Normal 32 - normal 16384 - below Normal 64 - low |
x32: (x32) | ShowCrashMessage | 0, 1 | 0 | 4.7.5 and later | Create or not the module crash message. |
x32: (x32) | SyncTime | 0, 1 | 0 | 4.7.3 and later | Defines whether to synchronize time between computers or not. |
x32: (x32) | Topmost | 0, 1 | 1 | 4.7.4 and later | Sets the splash screen location: This key is applied for splash screen on the Server/Remote Administrator’s workplace for Intellect versions older than 4.10.0, for versions newer 4.10.1 - both on the Server/Remote Administrator’s workplace and on the Client. |
x32: (x32) | Type_view_dept_log | 0,1,2 | 0 | 4.7.4 and later | Specifies displaying the name of department in the log: 0 - do not add: Ivanov Ivan Ivanovich; |
x32: (x32) | URAttempts | 0 - 10000 | 3 | 4.7.3 and later | Sets the number of attempts to enter the user password . |
x32: (x32) | URDelay | 0 - 10000 | 60 | 4.7.3 and later | Sets the delay period (sec) for re-entering the system. |
x32: (x32) | virtualgrabber | 0, 1 | 0 | 4.7.6 and later | Defines whether it is possible to create a virtual video capture card or no. |
x32: (x32) | SyncNotEmpty | 0, 1 | 0 | 4.8.5 and later | Defines the database synchronization algorithm: 1 – fast synchronization algorithm is in use; 0 - standard synchronization algorithm is in use. |
x32: (x32)\Debug | counter_period | >=0 | 0 | 4.9.0 and later | Defines the time period in seconds, in which information about availability of processor, memory and disk is recorded to the log-file. If the value of parameter is 0, this information is not included to the log-file. |
x32: (x32)\ IntellectRunService | RestartIntellectOnLogonDisable | 0, 1 | 0 | 4.9.0 and later | 1 – Intellect installed as a Service is not restarted under the current user even for users belonging to the IntellectUsers group. 0 – Intellect installed as a Service is restarted under the current user only if the user belongs to the IntellectUsers group. |
x32: (x32)\ IntellectRunService | CheckUserForRestartIntellectDisable | 0, 1 | - | 4.9.0 and later | 0 – Intellect installed as a Service is restarted (when entering the system) under the current user only if the user belongs to the IntellectUsers group. 1 – Intellect installed as a Service is restarted (when entering the system) under the current user even if the user doesn’t belong to the IntellectUsers group. The settings of permissions are to be taken into account when using this key. If the permissions are set incorrectly, then some Intellect features can operate incorrectly. |
x32: (x32) | ShowHiddenObjects | 0, 1 | 0 | 4.9.0 and later | 0 – hidden objects corresponding to IntegratedAudioSource and IntegratedVideoSource objects, as well as to Integrated device child objects are not shown in the object tree in Intellect. 1 – hidden objects are shown in the object tree in Intellect. Intellect is to be restarted when the key value is changed. |
x32: (x32) | InheritServiceEnviroment | 0, 1 | - | 4.8.8 only | The key is essential for proper operation of Intellect in MS failover cluster. |
x32: (x32)\ IntellectRunService\ | InheritServiceEnvironment | 0, 1 | - | 4.9.0 and later | The key is essential for proper operation of Intellect in MS failover cluster. |
x32: (x32) | SortCamsById | 0, 1 | - | 4.8.8 and later | The key is responsible for sorting the list of cameras on the settings panelof the Monitor object. 1 – cameras are sorted by ID; 0 – cameras are sorted by names. |
x32: (x32) | EventProcessingThreads | >=0 | 0 | 4.9.0 | Key reserves the specified number of streams for events processing. |
| 0-8 | Equal to CPU cores number | 4.10.4 | |||
x32: (x32)\Debug | DumpYUV | 0, 1 | - | 4.9.0.959 | Key activates the mode of video dump corresponding to compressor. It is required for diagnostics of StreamLabs (motionWavelet7.1) compressor/decompressor problems. File (or files) with decompressed data will be created by key in the Modules directory. Names of files correspond to the template: W – width; For example, file with resolution 640x480 in YUV420 color area will have the 640x480_22_chunk_0.yuv name. |
x32: (x32) | settings_height | >0, depends on screen resolution | 438 | Sets the height of the object settings panel (in pixels). | |
x32: (x32) | settings_width | >0, depends on screen resolution | 600 | Sets the width of the object settings panel (in pixels). | |
| x32: (x32) x64: (x64) | ATMSendSetup | 0, 1 | 1 | 4.9.3 | 0 – receiving of the SETUP reaction from the ATM object is disabled on the computer where this key is specified. 1 - receiving of the SETUP reaction from the ATM object is enabled on the computer where this key is specified. |
| x32: (x32) x64: (x64) | RegisterF10andF11 | 0, 1 | 1 | 4.9.2 | 1 - F10 and F11 hot keys are in use to control screen displaying (see Main control panel section). 0 - F10 and F11 hot keys are not in use to control screen displaying. Note.When the key is changed Intellect restart is required. To disable F10 and F11 hot keys on the Administrator Remote Workplace, the key is to be created in the \HKEY_CURRENT_USER\Software\ITV\Intellect registry section. To disable F10 and F11 hot keys on the Administrator Remote Workplace when operating under the Admin account, he key is to be created in the same registry section as on Server (x32)/(x64). |
| x32: (x32) x64: (x64) | DisableF8 | 0, 1 | 0 | 4.10.4 | 0 - F8 hot key is in use to call the Execute menu on the main control panel. 1 - F8 hot key is not in use. Note. To disable F8 hot key on the Administrator Remote Workplace, the key is to be created in the \HKEY_CURRENT_USER\Software\ITV\Intellect registry section. To disable F8 hot key on the Administrator Remote Workplace when operating under the Admin account, he key is to be created in the same registry section as on Server (x32)/(x64). |
x32: (x32) | check_digital | 0, 1 | 0 | 4.8.0 | When the key value = 1, video or archive period is exported from the Monitor interface using the admin password. |
| x32: (x32) x64: (x64) | CONNECT_ATTEMPTS | >=1 | 1 | 4.9.4 | The key sets the number of attempts to connect the Client to Server. The key is specified on the side of the Client. |
| x32: (x32) x64: (x64) | FLUSH_TIMER_TIMEOUT | >0 | By default the key is not created, the value is 10. | 4.9.4 | The key specifies maximum waiting time (in milliseconds) before sending data over the network. The higher the value of this parameter, the more productive the system is (due to decreasing resources when sending a large amount of small messages). However, time of response to events can also increase. |
| x32: (x32) x64: (x64) | UnloadDelay | 0 to 60000 ms | 5000 | 4.9.5 | The key sets the delay between disabling Guardant and unloading Intellect. The delay is essential for the FORCED_OFF event generation of the SLAVE object and in case this event is used in scripts or programs, these scripts and programs are executed. If UnloadDelay = 0, unloading is performed without any delays, i.e. script/program in which the specified event is used, cannot execute. |
| x32: (x32) x64: (x64) | SortSubItems | 0, 1 | 1 | - | The key is for specifying the way of sorting the objects in the tree: 0 – sorting by name. 1 – sorting by ID. Note 1. If sorting by name is chosen, and there are numbers in the object name, then the objects will be sorted in alphabetical order. For example, an object with the name "115" will be above the object with the name "15", because in the name "115" the second number is 1, and in the name "15" the second number is 5. Note 2. This key also affects the sorting of objects in the tree when adding the objects to a layer in the Map Editor utility. |
| x32: (x32) x64: (x64) | RestPort | 0 - 65535 | 10112 | from 4.10.1 to 4.10.2 | Sets the port through which Intellect receives events and reactions via HTTP request. See also Sending reactions and events to Intellect using HTTP request. |
| 0 | from 4.10.3 | ||||
| x32: (x32) x64: (x64) | ShowSmallBarAlways | 0, 1 | 0 | 4.10.1 | The key enables displaying the main control panel of Intellect on the screen. 0 – the main control panel is displayed when pointing to the upper right corner of the screen. 1 – the main control panel is always displayed in the upper right corner of the screen. |
| x32: (x32) x64: (x64) | UpdateProtocolPeriod | > 0 | - | 4.10.2 | Sets time period (in days) of storing the change protocol in the database. The storing period is counted from the last recording or starting from the current time depending on the value of the ClearProtocolFromCurrentTime key (see above). Recordings storing period of which has expired are deleted at midnight every 24 hours in case the license is activated. |
| x32: (x32) x64: (x64) | permissible_memory_limit | >0 | - | 4.10.3 | The key sets the occupied memory threshold, reaching which the core starts receiving messages with a delay. The key should be used when due to excessive memory consumption, the module shuts down. |
| x32: (x32) x64: (x64) | MsgCompressOn | 0, 1 | 0 | 4.10.3 | The key enables the compression of transmitted messages: 0 - compression is disabled. 1 – messages from the cores are sent compressed (zip with maximum compression). Compression allows reducing the network load. |
| x32: (x32) x64: (x64) | user_card_info_on | 0, 1 | 0 | Intermediate versions 4.10.3 | The key is used with the ACS/FAS integration modules that are the part of ACFA Intellect. It enables displaying the access card number for all events associated with the cards in the Event Viewer. Note. In the released version 4.10.3 to show and hide the Card column use the Hide Card checkbox – see Event viewer parameters. |
| x32: (x32) x64: (x64) | CriticalErrGui | 0, 1 | 0 | 4.10.3 | It enables displaying messages about database connection errors regardless the debugging mode (see the description of the Debug key and Selecting and enabling the debug mode of Intellect software section). 0 - messages about database connection errors are displayed only at Debug 4 debugging levels. 1 - messages about database connection errors are displayed regardless the selected debugging level. |
| x32: (x32) x64: (x64) | IntellectCloseTimeout | >0 | 60000 | 4.8.3 | It sets Intellect close timeout in milliseconds. If intellect.exe process does not close during this timeout, then it is terminated forcefully. If there is no key, then timeout is 60 seconds. |
| x32: (x32) x64: (x64) | SaveIncommingMsg | 0, 1 | 0 | 4.7.8 | It enables recording of incoming messages to log files for started modules. The file name looks like <module name>.exe.cd.log. These files are stored in the same folder as the executed module file, for instance, for intellect.exe the intellect.exe.cd.log file is stored in the Intellect installation directory and for itvscript.exe the itvscript.exe.cd.log file is stored in the Modules folder. When the size of the log file exceeds 4 GB, it is archived to the backup file with .bak extension - <module name>.exe.cd.log.bak. This is necessary to avoid module overload. Note. The log file is rewritten when Intellect is restarted. 0 – recording of incoming messages is disabled. 1 – recording of incoming messages is enabled. |
| x32: (x32) x64: (x64) | BackupFolder | Address of a local or network folder | - | 4.7.6 | Specifies the address of the folder to save a backup copy of the database created by a macro or using the idb.exe utility. For example, C:\Documents and Settings\AVP\Desktop\Backup If the database copy is to be stored on the network disk, then the UNC path to the network folder (with the recording access) is to be specified on the disk in the \\ServerName\ShareName format. Take into account the fact that all network resources that require additional authentication are to be enabled using the same username as for running the SQL Server service. See also Creating the database backup copy |
х32 and x64: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon | Shell | Any text value | explorer.exe | 4.10.5 | If the key value contains the "explorer" string (for example, the default value, "testexplorertest" or "123explorertest125" values), the Save button is displayed in the About program... window. Otherwise, the Save button is hidden. |
| x32: (x32)\ IntellectRunService x64: (x64)\ IntellectRunService | IntellectUserGroup | Any text value | from 4.10.0 | If Intellect is installed as a Service, and you need to use a user group other than IntellectUsers, then specify the required user group name in this key. | |
| x32: (x32) x64: (x64) | monitor_refresh_delay | 10 - 3000 | 3000 | from 4.10.5 | The key sets a period in milliseconds to update video on Video Surveillance Monitors of the Clients after Failover Service has transferred configuration. If the key value is less than 500, the monitors are updated regardless of the number of cameras. If the key value is more than 500 and the number of cameras on the monitor is more than 64, the update does not occur while the System Settings dialog box is open. |
| x32: (x32) x64: (x64) | DisableUpdateProtocol | 0, 1 | 0 | from 4.7.5 | The key disables the filling of the UPDATE_PROTOCOL table storing information about changes of Intellect object settings (except the User objects). 0 – the UPDATE_PROTOCOL table is filled. 1 – the UPDATE_PROTOCOL table is not filled. |
Telemetry | |||||
Registry section | String parameter | Available values | Default | Product version | Parameter in effect |
x32: (X32)\ | Delay | > = 0 | 250 | 4.7.3 and later | Defines the delay (ms) when sending commands to the camera. This key is essential for scaling the stream of commands to the device as some devices can be blocked because of too many commands and cannot process the information.
This parameter is not supported by IP cameras. |
x32: (X32)\ | JoysticThreshold | > = 0 | 5 | 4.7.6 HOTFIX and later | This parameter sets the joystick trigger threshold: the less the number is, the more sensitive joystick is. 0 value is not recommended to be used, as commands can be sent randomly. When the value is too big, the joystick becomes rotation-insensitive. |
x32: (X32)\ | max_speed | 0-10 | - | 4.7.3 to 4.9.7 | Sets max. camera speed. |
x32: (X32)\ | min_speed | 0-10 | - | 4.7.3 to 4.9.7 | Sets min. camera speed. |
x32: (X32)\ | PriorityDelay | > = 0 | 30000 | 4.7.3 and later | Defines the priority delay (ms). |
x32: (X32)\ | UseBoschOSRD40 | 0, 1 | - | 4.8.4 and later | Enables presets saving for Bosch-Autodome control protocol. |
x32: (X32)\ | PnPJoystick | 0, 1 | 0 | 4.8.3 and later | The key defines whether to restart Intellect after connecting a joystick: 0 - Intellect is to be restarted after connecting the joystick. |
x32: (X32)\ | Zenable | 0, 1 | 1 | 4.7.7 and later | The key is in use with joysticks (e.g., Logitech Attack 3) where the telemetry control operates incorrectly because of shifted Z axis. Z axis is disabled when the parameter value is 0. Z axis is enabled when the parameter value is 1. |
| x32: (X32)\ TELEMETRY x64: (x64)\TELEMETRY | ZoomSpeed850 | 0,1 | 1 | 4.9.0 and later | The key is used in order to set the zoom step when panasonic-850 telemetry protocol is in use: 1 – zooming with 50% step of max. possible 0 – zooming with 20% step of max. possible |
| x32: (X32)\ TELEMETRY x64: (x64)\TELEMETRY | Zdirection | 0, 1 | 0 | 4.7.6 | The key is responsible for coordinate move in the Z-direction. |
| x32: (X32)\ TELEMETRY x64: (x64)\TELEMETRY | Ydirection | 0, 1 | 0 | 4.7.6 | The key is responsible for coordinate move in the Y-direction. |
| x32: (X32)\ TELEMETRY x64: (x64)\TELEMETRY | Xdirection | 0, 1 | 0 | 4.7.6 | The key is responsible for coordinate move in the X-direction. |
| x32: (X32)\ TELEMETRY x64: (x64)\TELEMETRY | WaitDelay | >=0 | 0 | 4.7.5 | If a joystick sends the messages about its state to Intellect too frequently and Intellect has no time to process these messages, then this parameter is in use – it allows calling the signal handler less frequently. For instance, this parameter should be used with Axis 295 joystick. The best parameter value is to be chosen. The value should match the 100 – 300 range. |
| x32: (x32)\ TELEMETRY x64: (x64)\TELEMETRY | TelemetryDirectCommand | 0, 1 | 1 | 4.9.8 | The key specifies way of command transmission to telemetry: 1 – telemetry server is connected to video servers and sends commands to devices. 0 – telemetry server sends commands to the Intellect core which send them to devices. See also description of the MonitorToTelemetryDirectCommand key below. |
| x32: (x32)\ TELEMETRY x64: (x64)\TELEMETRY | MonitorToTelemetryDirectCommand | 0, 1 | 0 | 4.9.8 | The key specifies way of transmission telemetry commands while control from the Monitor: 1 – telemetry server is connected to video servers and sends commands to devices while telemetry control from the Monitor. 0 – telemetry server sends commands to the Intellect core which send them to devices while telemetry control from the Monitor. The key is in use with the TelemetryDirectCommand key to provide smoother telemetry control. Recommended values of these keys: TelemetryDirectCommand = 1 (default value) MonitorToTelemetryDirectCommand = 1 (attention: default value is 0) Attention! Client, server and camera should be in one subnet without video gate when using these registry keys. Otherwise, systemwillnotoperate. |
| x32: (x32)\ TELEMETRY x64: (x64)\TELEMETRY | SendEventToCore | 0, 1 | 0 | 4.10.0 | The key is to enable the function of sending events to Intellect core when controlling PTZ. This function is essential for PTZ control audit. 1 – when sending any reaction of TELEMETRY object the corresponding event is generated. 0 – during PTZ control events are not generated. |
| x32: (X32)\ Video\CommonPresets x64: (x64)\Video\CommonPresets | ONVIF | 0, 1 | 0 | 4.10.0 | The key enables presets created on the camera in Intellect. The function is only available when camera is connected via ONVIF protocol and only if video server settings are selected when adding a Video capture device using the Camera discovery tool and the Use device settings checkbox is set unchecked on the settings panel of the Video Capture Device object. 0 – presets created on the camera are not used in Intellect. 1 – presets created on the camera are in use in Intellect. The features are listed below:
|
| x32: (x32)\ TELEMETRY x64: (x64)\TELEMETRY | panas850_stop_dublicates | >0 | - | 4.10.2 | The key is in use if the camera rotation is not stopped when telemetry is controlled over Panasonic-850 protocol. The key specifies how many times the stop command is to be duplicated. |
Player | |||||
Registry section | String parameter | Available values | Default | Product version | Parameter in effect |
x32: (X32)\Player | Wav_delay | > = 0 | 0 | 4.7.3 and later | Defines the sound delay (sec) when playing back synchronously video with the sound. |
Event log | |||||
Registry section | String parameter | Available values | Default | Product version | Parameter in effect |
x32: (X32)\ EventViewer | Overlay | 0, 1 | 1 | 4.7.3 and later | Defines whether to use overlay. |
x32: (X32)\ EventViewer | Topmost | 0, 1 | 0 | 4.7.3 and later | Defines whether to display event log as topmost window: 0 - standard window; 1 - topmost window. |
x32: (X32)\ EventViewer | UserActivityTimeout | >0 | 3 | 4.10.3 | It sets the time period in minutes, after which, if there is no user activity, automatic scroll to the end of the event list when new events arrive is enabled in the Event Viewer window. If 0 is specified, then automatic scroll is disabled. |
Disabling system objects | |||||
Registry section | String parameter | Available values | Default | Product version | Parameter in effect |
x32: (X32)\ Subscribe | OBJECT_NAME | (*) (№.*) (№.№) |
| 4.7.3 and later | Describes rules for system starting. Unimplemented system objects are disabled. You should create a string parameter with the name that is used by the system of the object that is to be disabled and specify its ID separated by a full stop. |
IP integration (drivers and codecs pack for Intellect) | |||||
Registry section | String parameter | Available values | Default | Product version | Parameter in effect |
x32: (X32)\Video | ArchiveFps | 1-24 |
| 4.7.5 and later | Sets the number of frames recorded to the archive (max.resolution). LiveFps and ArchiveFps parameters are not to exceed 24 in total. |
x32: (X32)\Video | ArecontVision | 0, 1 |
| up to 4.8.0 | Enables the protocol for integrating Arecont cameras. The key is not in use. |
x32: (X32)\Video | DoubleStream | 0, 1 |
| 4.7.5 and later | Defines whether asynchronous video display mode is enabled or not. |
x32: (X32)\Video | IpIntDrivers3 | Brand name: Axis; Acti, etc. |
| 4.7.3 and later | The IpIntDrivers3 string parameter is created and the names of brands that need 3.0 driver are listed. |
x32: (X32)\Video | IpIntDriverVersion | 2, 3 |
| 4.7.3 and later | Defines the version number of loaded drivers: |
x32: (X32)\Video | LiveFps | 1-24 |
| 4.7.5 and later | Sets the number of frames displayed in the 800x600 format. LiveFps and ArchiveFps parameters are not to exceed 24 in total. |
x32: (X32) | LoadIpIntDirectly | 0, 1 |
| 4.9.0 and later | 1 - enable IntegratedDevice via video.run. If the setting is enabled and at least one IntegratedDevice is added, then other IP video capture cards are disabled. 0 - IIntegratedDevice operates as a separate run-module. |
| x32: (X32)\Video\TransportProtocols x64: (x64)\Video\TransportProtocols | <Driver name> | <protocol> | - | DP 3.1.1 and later | The key is used to change a transport protocol used by the IP device. Example of the key value: "ONVIF"="tcp" means that TCP protocol is used to transfer data via ONVIF. See details in Changing the transport protocol used by IP-device Example of the key value: "rtsp"="multicast" allows enabling Multicast mode of the RTSP Server. The object configuration is required in addition to the key. See details in Configuring RTSP Server module. |
x32: (X32)\Video\MetadataTransportProtocols | The name of camera driver (in the driver parameter of the C:\Program Files\ Common Files\ AxxonSoft\ Ipint.DriverPack \3.0.0\ Ipint.<Driver name>.rep file) | The name of transport protocol (is to be the same as one of the values specified in metadataTransportProtocol property in the corresponding .rep file). | - | DP 3.31.1613 and later | The key is used to change a metadata transport protocol. At the time of writing this documentation change of a metadata transport protocol was available for ONVIF driver only (possible values are tcp and udp). |
| x32: (X32)\Video x64: (x64)\Video | UnloadUnusedDriverTimeout | >=0 | 60 | DP 3.32.1638 and later | The key sets unused driver unload timeout for cameras. For instance, if camera brand is in several drivers, all of them are loaded at camera connection. To unload the unused drivers, set non-zero value to this key. If the key is not created, then unused drivers are unloaded in 60 seconds. 0 – drivers do not unload (such behavior was in DriverPack versions older than the current one). The key value that is > 0 sets unused driver unload timeout. If the key is created but it consists of NaN value, then unused driver unload timeout is set to the default value – 60 seconds. |
x32: (X32)\TELEMETRY | PresetCompatibility | 0, 1 | - | DP 3.43.1950 and later | The key is used to enable the compatibility between presets in Intellect and previous versions of Drivers Pack, i.e. to decreasing the preset number by 1 when sending it to the driver. 0 – a new operation mechanism with presets the same as in AxxonNext is in use in Intellect. If preset 1 is selected in Intellect interface, then value 1 is sent to the driver. 1, or if the key is not created – the compatibility mode is in use: if preset 1 is selected/created in Intellect interface, then value 0 is sent to the driver. |
x32: (x32)\Video | FFTHREADCOUNT | >=0 | 1 | DP 3.43.1955 and later | The key sets the number of streams created in FFmpegDecoder. 0 – decoder automatically selects the number of created streams. >0 – sets the number of streams in use. By default if there is no key or the value is incorrect, then value 1 is in use. Auto selection of the number of streams can result in the system load reduction or its increase as the number of streams recreated during decoding increases – this affects the performance. |
x32: (x32)\EventSources | <brand>.<model> (for example, ONVIF.1_channel_device). If all models of some manufacturer require a specific method of getting events, then there must be a string key named <brand> in the section. | Pull point Meta data Disable | Meta data | DP 3.35.1692 | By the date the documentation in created, this key is supported for three brands: ONVIF, RVi and IDIS. For models of these brands, the key is created automatically when the Drivers Pack is installed. The key sets a method of getting data about the analytics and the sensors of the device:
|
| x32: (x32)\Video\UseSsrcChecking x64: (x64)\Video\UseSsrcChecking | RTSP | enable disable | enable | DP 3.45.2055 | The key is intended for setting up synchronization source (SSRC) for RTSP stream: enable – SSRC check enabled; disable – SSRC ched disabled. |
x32: (x32)\Video | FFLOGDELAY | 0, 1 | 0 | CP 1.580 | Enables logging of delays of frames decoding and idle time for FFMPEG codec. |
| х32: (x32)\Video\TsConverters x64: (x64)\Video\TsConverters | <brand>.<model>, for example, Tattile.ANPR Mobile If all brand's models require a certain method of the timestamp adjustment, then the section must contain a string key with the name <brand>. |
| Depends on the brand | DP 3.34 and later | The keys in this section specify the method of the frame timestamp adjustment. If the key is not created, the timestamp transferred to the Intellect equals 0, and then the current time is set as its value. The None value is used if it is necessary to disable the adjustment and transfer the timestamp received from the camera as is. The ValidDeviceTs value means that the timestamp adjustment method is used before the timestamps transmission to the Intellect if the timestamp received from the camera differs from the current time by the value greater than the one specified in the MaxTimestampDeviation key (see below). After the adjustment, the timestamp calculated on the basis of the previous frame's timestamp and the time elapsed since its reception is transmitted to the Intellect. InfrequentTs value discards the relative timestamps, transferring 0 to the Intellect instead (i.e., the current time is set as the timestamp value), and it also transfers the absolute timestamps with the ETimestampValidityFlag flag. This adjustment method should be used for the devices with the license plates recognition which transfer the separate frames to the external system, rather than a continuous video stream. For some manufacturers, when installing the Drivers Pack, the keys with the necessary values are automatically created in the appropriate registry key. |
| х32: (x32)\Video x64: (x64)\Video | MaxTimestampDeviation | >=0 | - | DP 3.34 and later | The key is used for the ValidDeviceTs key value from the TsConverters branch (see above). The key sets the maximum permissible deviation of the frame timestamp from the current Server time. |
| x32: (x32)\Video x64: (x64)\Video | ErrorSensitivity | 0, 1 | 0 | DP 3.54 and later | The key enables the interruption of the H.265 video decoding via the ffmpeg decoder in case of the slightest error in the video stream. 0 - if the video stream contains errors, then a buffer with artifacts will be received from the ffmpeg decoder. 1 - if the video stream contains errors, then an empty buffer will be received from the ffmpeg decoder. |
Import module | |||||
Registry section | String parameter | Available values | Default | Product version | Parameter in effect |
x32: (X32)\ DB Import | ChunkSize | > 0 and >= photo size | 32768 | 4.7.3 and later | Sets the buffer size (in bytes) when reading large files (photo) in the external DB. |
x32: (X32)\ DB Import | CursorLocation | 1, 2, 3 | 2 | 4.7.3 and later | Sets the cursor location (pointer to DB entries): |
x32: (X32)\ DB Import | DwSleep | > = 0 | 1 | 4.7.3 and later | Sets the delay value (ms) when sending modified entries to the core in the external DB in order not to get 100% CPU load. |
x32: (X32)\ DB Import | FlagsLog | - | - | up to 4.7.5 |
|
x32: (X32)\ DB Import | MoveFirst | 0 | 0 | 4.7.3 and later | The key must not be modified. |
x32: (X32)\ events | Events_out | - | - | up to 4.7.5 | Debug key |
x32: (X32)\ events | Events_out2 | - | - | up to 4.7.5 | Debug key |
x32: (X32)\ events | In | - | - | up to 4.7.5 | Debug key |
x32: (X32)\ events | PostedEvents | - | - | up to 4.7.5 | Debug key |
x32: (X32)\ events | PostedReacts | - | - | up to 4.7.5 | Debug key |
x32: (X32)\ events | Reacts_out | - | - | up to 4.7.5 | Debug key |
Special keyboard | |||||
Registry section | String parameter | Available values | Default | Product version | Parameter in effect |
x32: (X32)\ Keyb
| Prefix | VK_NUMPAD0 | 0x60 0x61 0x62 0x63 0x64 0x65 0x66 0x67 0x68 0x69 0x6A 0x6B 0x6C 0x6D 0x6E 0x6F 0x70 0x71 0x72 0x73 0x74 0x75 0x76 0x77 0x78 0x79 0x7A 0x7B 0x7C 0x7D 0x7E 0x7F 0x80 0x81 0x82 0x83 0x84 0x85 0x86 0x87 | 4.7.3 and later | The list is not full. Any soft key can be in use. |
| x32:(X32)\ Keyb x64:(x64)\Keyb | ProcessAll | 0 ,1 | 0 | The key allows using the standard keyboard as the special one. In this case keypress on the standard keyboard will be considered as keypress on the special keyboard and processed according to the ini file. | |
Video analytics | |||||
Registry section | String parameter | Available values | Default | Product version | Parameter in effect |
x32: (X32)\Video\Detectors\Vmda x64: (x64)\Video\Detectors\Vmda | InactiveInterval | >0 | - | 4.9.0 | Key specifies time period in minutes, during which absence of detected objects by tracker is permitted. If the key is created, after the specified time and if there is no activity of VMDA detection, the message about inactivity will be generated. On default, this message is not generated. |
x32:(X32)\Video\Detectors\Vmda x64: (x64)\Video\Detectors\Vmda | VMDA.useSpeedLimitTypeLessThan | VMDA detector IDs separated by comma or semicolon | - | 4.10.4 and later | The VMDA detection tool IDs separated by comma orsemicolon that should be triggered when the object speed is less than the speed configured for the VMDA detection tool. Note 1. If no ID is specified for this parameter, or there is no parameter at all, the detection tool is triggered when an object crosses the line in the selected direction with a speed that is approximately the same as the speed configured for the VMDA detection tool. Note 2. The same VMDA detector id can only be specified for either the VMDA.useSpeedLimitTypeLessThan or the VMDA.useSpeedLimitTypeMoreThan (see below) parameters. The simultaneous operation of both these parameters for the same VMDA detector is not allowed. |
x32:(X32)\Video\Detectors\Vmda x64: (x64)\Video\Detectors\Vmda | VMDA.useSpeedLimitTypeMoreThan | VMDA detector IDs separated by comma or semicolon | - | 4.10.4 and later | The VMDA detection tool IDs separated by comma orsemicolon that should be triggered when the object speed is greater than the speed configured for the VMDA detection tool. Note 1. If no ID is specified for this parameter, or there is no parameter at all, the detection tool is triggered when an object crosses the line in the selected direction with a speed that is approximately the same as the speed configured for the VMDA detection tool. Note 2. The same VMDA detector id can only be specified for either the VMDA.useSpeedLimitTypeLessThan (see above) or the VMDA.useSpeedLimitTypeMoreThan parameters. The simultaneous operation of both these parameters for the same VMDA detector is not allowed. |
| х32: (X32)\Video\VMDA x64: (x64)\Video\VMDA | VMDA.ignoreAnaliticStream | 0, 1 | 0 | 4.9.8 and later | The key sets the camera stream used by the detection modules included in the Detector Pack subsystem. 0 - the Video Analytics stream is used. 1 - the Default stream is used. Note. If the camera is not used in the multi-thread mode, the first stream (the only one) will be used regardless of the key value. |
Web Server | |||||
|---|---|---|---|---|---|
Registry section | String parameter | Available values | Default | Product version | Parameter in effect |
x32: (x32)\WebServer\ x64: (x64)\WebServer\ | RequestTimeout | >0 | 10000 | 4.9.0 | Sets max.time (in milliseconds) for Server to process a request. |
x32: (x32)\WebServer\ x64: (x64)\WebServer\ | ConnectionTimeoutAtIdle | >0 | 30000 | 4.9.0 | Sets max.time (in milliseconds) for connection inactivity between Client and Server. Inactive connection is disconnected upon timeout. |
| Map | |||||
|---|---|---|---|---|---|
| Registry section | String parameter | Available values | Default | Product version | Parameter in effect |
x32: (x32)\Map\ x64: (x64)\Map\ | NotUsingCash | 0, 1 | - | 4.9.2 | The key is in use on the map when there are objects the backgrounds of which are overlaied. In these cases the object icons can be erroneously displayed because of background caching. To fix these bugs you should disable caching by specifying 1 value for the key. Take into account the fact that caching disabling can cause high CPU load. |
x32: (x32)\Map\ x64: (x64)\Map\ | AlternativeSelect | 0, 1 | 0 | 4.10.0 | The key is designed to disable object framing. 0 – the object is framed. 1 – the object is not framed. |
x32: (x32)\Map\ x64: (x64)\Map\ | <Map_id>MiniMapB | >0 | MiniMapT + 169 | 4.10.1 | Sets the Y-axis coordinate of the bottom right corner of the minimap on the monitor in pixels. Changing of the key value can be required for exact minimap sizing or for resetting minimap position (by deleting MiniMap keys). |
x32: (x32)\Map\ x64: (x64)\Map\ | <Map_id>MiniMapL | >0 | The X-axis coordinate of the upper left corner of the Map | 4.10.1 | Sets the Y-axis coordinate of the upper left corner of the minimap on the monitor in pixels. Changing of the key value can be required for exact minimap sizing or for resetting minimap position (by deleting MiniMap keys). |
x32: (x32)\Map\ x64: (x64)\Map\ | <Map_id>MiniMapR | >0 | MiniMapL + 287 | 4.10.1 | Sets the X-axis coordinate of the bottom right corner of the minimap on the monitor in pixels. Changing of the key value can be required for exact minimap sizing or for resetting minimap position (by deleting MiniMap keys). |
x32: (x32)\Map\ x64: (x64)\Map\ | <Map_id>MiniMapT | >0 | The Y-axis coordinate of the upper left corner of the Map | 4.10.1 | Sets the X-axis coordinate of the upper left corner of the minimap on the monitor in pixels. Changing of the key value can be required for exact minimap sizing or for resetting minimap position (by deleting MiniMap keys). |
x32: (x32)\Map\Minimap x64: (x64)\Map\Minimap | ShowOnMouseMove | 0, 1 | 0 | 4.10.2 | Sets how the minimap is displayed: 0 – using the Minimap item in the Map feature menu. 1 – pointing the mouse cursor to the top left corner of the Map. |
x32: (x32)\Map\ x64: (x64)\Map\ | EventFontHeight | Integer | -8 | 4.10.3 | Specifies the font size for displaying information about the latest event in the feature menu of the object on the map. |
x32: (x32)\Map\ x64: (x64)\Map\ | InscribeEditor | 0, 1 | 1 | 4.10.5 and later | The key enables the automatic "Fit the window"checkbox activation for all layers in the Map editor window if this checkbox was previously set for any layer. 0 - the layer will be fit into the Map editor window only if the "Fit the window" checkbox was previously set for this layer. 1 - any layer will be fit into the Map editor window, if the "Fit the window" checkbox was previously set for any layer. |
x32: (x32)\Map\ x64: (x64)\Map\ | HideAnalogName | 0, 1 | 0 | 4.10.5 and later | The key hides the "Value =" in the value of the objects on the Map for which the Text type of display is selected. 0 - objects' text values are displayed on the Map with the "Value =. 1 - objects' text values are displayed on the Map without the "Value =. |
x32: (x32)\Map\ x64: (x64)\Map\ | TouchScreen | 0, 1 | 0 | 4.10.5 and later | The key enables opening of the functional menu of the object on the Map by left double clicking the icon. 0 - left double-clicking the icon of an object on the Map does not open the functional menu. 1 - left double-clicking the icon of an object on the Map opens a functional menu. |
Mail Message Service | |||||
|---|---|---|---|---|---|
| Registry section | String parameter | Available values | Default | Product version | Parameter in effect |
| x32: (x32)\MMS\ x64: (x64)\MMS\ | UseTls | 0, 1 | 1 | Defines whether to use TLS encoding for Mail Message Service or not. | |
Short Message Service | |||||
|---|---|---|---|---|---|
| Registry section | String parameter | Available values | Default | Product version | Parameter in effect |
| x32: (x32)\SMS\ x64: (x64)\SMS\ | ProcessFromSim | 0, 1 | By default the key is not created, the value is 0. | 4.9.4 | The key is to be created with value 1 if a USB modem is connected to Intellect and it operates in Intellect, but Intellect does not get the RECEIVE event from SMS object when sending messages to such modem. HUAWEI E173 is an example of such modem. Important! SMS messages are to be stored on SIM for proper operation of the registry key. Important! When the key is in use, SMS messages sent to the modem are deleted. |
Script | |||||
|---|---|---|---|---|---|
| Registry section | String parameter | Available values | Default | Product version | Parameter in effect |
x32: (x32)\Script\ x64: (x64)\Script\ | DebugMaxLines | >=0 | 200 | 4.9.5 | Sets the number of lines to be displayed in the Script debug window (for details see Programming Guide (JScript)). |
x32: (x32)\Script\ x64: (x64)\Script\ | TerminateProcessOnHang | 0, 1 | 1 | 4.10.4 | 0 – Intellect core does not terminate the itvscript.exe process when it hangs. 1 – Intellect core terminates the itvscript.exe process when it hangs. |
Abandoned objects detection tool of the Tracker object | |||||
|---|---|---|---|---|---|
Registry section | String parameter | Available values | Default | Product version | Parameter in effect |
x32: (X32)\Video | UseRealTimeStamps | Comma-separated camera identifiers | - | 4.9.5 to 4.9.7 | Identifiers are separated by commas for cameras for which current timestamps are to be sent. Due to features of the unattended object detection tool (that is a third-party module) it sends synthetic timestamps by default. |
| x32:(X32)\Video\VMDA x64:(x64)\Video\VMDA | 4.9.8 and later | ||||
x32: (X32)\Video | unattendedObjectSensitivity | Comma-separated sensitivity values in the ‘camera id.sensitivity’ format. Sensitivity range –[1...25] EXAMPLE: unattendedObjectSensitivity="1.15,99.20,4.7" | 7 for all cameras | 4.9.5 to 4.9.7 | Sets sensitivity of unattended objects detection tool for specified cameras. |
| x32:(X32)\Video\VMDA x64:(x64)\Video\VMDA | 4.9.8 and later | ||||
x32: (X32)\Video | unattendedObjectLongMemory | Comma-separated camera identifiers EXAMPLE unattendedObjectLongMemory ="1,1000,2,999,3,5,4,6,7,8" | - | 4.9.5 to 4.9.7 | Sets identifiers of cameras to which the unattended object detection tool with long memory is to be used. |
| x32:(X32)\Video\VMDA x64:(x64)\Video\VMDA | 4.9.8 and later | ||||
x32: (X32)\Video | unattendedObjectTimeBeforeCheck | Values of periods are comma-separated and are in the ‘camera id.period’ format. EXAMPLE unattendedObjectTimeBeforeCheck = "4.20,1.10,3.40" | By default it is the same as the waiting for loss period set while configuring the Tracker object (see Creating and configuring the Tracker object). | 4.9.5 to 4.9.7 | Time in seconds before checking object in case of using the unattended object detection tool with long memory. |
| x32:(X32)\Video\VMDA x64:(x64)\Video\VMDA | 4.9.8 and later | ||||
x32: (X32)\Video | determineNoise | 0, 1 | 1 | 4.9.5 to 4.9.7 | Use (1) or not (0) the algorithms for detecting pseudo-moving objects |
| x32:(X32)\Video\VMDA x64:(x64)\Video\VMDA | 4.9.8 and later | ||||
x32: (X32)\Video | determineColorIdentity | 0, 1 | 1 | 4.9.5 to 4.9.7 | Use (1) or not (0) the algorithms for detecting objects matching by their color characteristics |
| x32:(X32)\Video\VMDA x64:(x64)\Video\VMDA | 4.9.8 and later | ||||
x32: (X32)\Video | determineHumanCar | Comma-separated camera identifiers. EXAMPLE determineHumanCar ="1,1000,2,999,3,5,4,6,7,8" | - | 4.9.5 to 4.9.7 | Sets the list of camera identifiers for which the algorithm of determining whether it is a car or a human is to be ENABLED. For proper operation of the tracker determineGivenTaken and determineHumanCar keys MUST be used at the same time. There is no point in using only one key. |
| x32:(X32)\Video\VMDA x64:(x64)\Video\VMDA | 4.9.8 and later | ||||
x32: (X32)\Video | determineGivenTaken | Comma-separated camera identifiers. EXAMPLE determineGivenTaken ="1,1000,2,999,3,5,4,6,7,8" | 4.9.5 to 4.9.7 | Sets the list of camera identifiers for which the algorithm of determining whether the object is given or taken is to be enabled in the unattended object detection tool. For proper operation of the tracker determineGivenTaken and determineHumanCar keys MUST be used at the same time. There is no point in using only one key. | |
| x32:(X32)\Video\VMDA x64:(x64)\Video\VMDA | 4.9.8 and later | ||||
x32: (X32)\Video | VMDAFPS | >=-1 | 30 | 4.9.5 to 4.9.7 | Sets fps to be sent to the tracker. |
| x32:(X32)\Video\VMDA x64:(x64)\Video\VMDA | 4.9.8 and later | ||||
| x32:(x32)\Video\VMDA x64:(x64)\Video\VMDA | useLeftImprover | 0,1 | - | 4.9.8 and later | The key specifies usage of previous frame processing before its sending to video analytics repository: 0 – not to use. 1 – to use. If the key is enabled, it's in use for all cameras. Important! The useFilterFrame parameter is to have ‘1’ value for key operation (see below). |
| x32:(x32)\Video\VMDA x64:(x64)\Video\VMDA | longShif | >=0 | - | 4.9.8 and later | Parameter of moving average accumulation is reasonable only when value 1 is assigned to the useLeftImprover parameter. It is not recommended to change value of parameter. |
| x32:(x32)\Video\VMDA x64:(x64)\Video\VMDA | longShiftUpdateThreshold | >=0 | - | 4.9.8 and later | Threshold of difference from a background below of which the long moving average is updated. It has a point if value 1 is assigned to the useLeftImprover parameter. It is not recommended to change the parameter value. |
| x32:(x32)\Video\VMDA x64:(x64)\Video\VMDA | useLeftImproverGeometry | 0, 1 | - | 4.9.8 and later | The key specifies post processing usage of frames received from video analytics repository. Procedure is configured only for operation with frames from left-off items detection, so it can operate incorrectly with frames from tracker. If the key is enabled, it is in use for all cameras. Important! The useFilterFrame parameter is to have ‘1’ value for key operation (see below). |
| x32:(x32)\Video\VMDA x64:(x64)\Video\VMDA | timeShift | >=0 | - | 4.9.8 and later | Time period in seconds after receiving a frame from video analytics repository, during which item in the frame will be analyzed for "invalidity". Operates only when the useLeftImproverGeometry key is enabled. The more this time period the longer item is analyzed and analysis is more authentic, but the more unlikely the item will be removed from the frame by the time of analysis completion. |
| x32:(x32)\Video\VMDA x64:(x64)\Video\VMDA | timeLife | >=0 | - | 4.9.8 and later | Time period during which left-off item frame will be sent after its recognition by analyzer of post processing video analytics repository. It is in use only when the useLeftImproverGeometry key is enabled. |
| x32:(x32)\Video\VMDA x64:(x64)\Video\VMDA | maxDeltaInside | 0-255 | - | 4.9.8 and later | Value of maximal difference of average color in the left-off item frame at the moment of frame receiving from video analytics repository and at the moment after time specified by the timeShift key. The less value, the more strict condition and the less number of items (left-off items) satisfying this condition. |
| x32:(x32)\Video\VMDA x64:(x64)\Video\VMDA | minDeltaOutside | 0-255 | - | 4.9.8 and later | Minimal difference of average color in the left-off item frame received from video analytics repository from average color around the frame, at which the frame will be further analyzed and won't be considered as invalid trigger. It is in use only when the useLeftImproverGeometry key is enabled. The higher value, the more strict condition and the less number of items (left-off items) satisfying this condition. |
| x32:(x32)\Video\VMDA x64:(x64)\Video\VMDA | useFilterFrame | 0, 1 | 0 | 4.9.8 and later | The key is responsible for enabling frame pre-process before its analysis. If it is disabled, useLeftImprover and useLeftImproverGeometry keys won’t work (see above). 1 – enabled; 0 – disabled. |
| x32:(x32)\Video\VMDA x64:(x64)\Video\VMDA | VMDA.determineNoise | 0, 1 | 1 | Starting with 4.10.3 | Enables the noise determination function on the video and when smart video detection tools operate. |
| x32:(x32)\Video\VMDA x64:(x64)\Video\VMDA | VMDA.determineGivenTaken | IDs of cameras, comma-separated | - | Starting with 4.10.3 | Enables the function of determining the given/taken objects on the side of the Tracker library. Information about given/taken objects is recorded to the VMDA metadata storage. After that, it is possible to perform forensic search by them in the archive. See also CAM_VMDA_DETECTOR. |
| x32:(x32)\Video\VMDA x64:(x64)\Video\VMDA | VMDA.determineHumanCar | IDs of cameras, comma-separated | - | Starting with 4.10.3 | Enables the function of determining the object type on the side of the Tracker library. This type is stored to the VMDA metadata storage. After that, it is possible to perform forensic search by it in the archive. See also CAM_VMDA_DETECTOR. |
RTSP-server | |||||
|---|---|---|---|---|---|
Registry section | String parameter | Available values | Default | Product version | Parameter in effect |
| x32:(x32)\StreamingServer x64:(x64)\StreamingServer
| def_port | >0 | 17000 | 4.9.9 | Sets the range start of used UDP protocols for RTSP-RTP. |
| x32:(x32)\StreamingServer x64:(x64)\StreamingServer | IpInterface | IP-address | - | 4.9.9 | Sets IP-address of network interface which is to be used for RTSP-server broadcast. |
| x32:(x32)\StreamingServer x64:(x64)\StreamingServer | split_range | >0 | 1 | 4.10.1 | The key is responsible for merging archive fragments into one when playing back the archive via the RTSP Server. If the split between archive fragments is less than time specified in the key, then archive fragments will be in the same range in the DESCRIBE field when addressing RTSP archive as if there is no split in the archive. Note. The key is in use for integration with ECHD. |
| x32:(x32)\StreamingServer x64:(x64)\StreamingServer | send_real_time | 0, 1 | 0 | 4.10.1-4.10.3 | The key is in use if there are any problems playing back the RTSP archive in the VLC media player. The key allows sending real time instead of frame time to the player. Important! If the key value is “1”, then the Single Data Center (ECHD) clients won’t work. Note. Since Intellect 4.10.4, the VLC player compatibility mode parameter is used instead of this key. It is located on the settings panel of the RTSP Server object - see Configuring RTSP Server Module. |
x32: (x32)\StreamingServer | LogFrames | 0, 1 | 1 | 4.10.1 | The key enables RTSP stream statistics logging. |
| Anchor | ||||
|---|---|---|---|---|
|
AviExport utility | |||||
|---|---|---|---|---|---|
Registry section | String parameter | Available values | Default | Product version | Parameter in effect |
x32: (X32)\Video\AVI | UseCodecAXXN | 0, 1 | 0 | 4.10.0 | 1 – utility is started in export mode in the AXXN codec if Export to AVI in initial format item is selected.
0 – export is possibly performed in original format. Note. See also The AviExport utility. |
| x32: (x32)\Video\AviExport x64: (x64)\Video\AviExport | ExportPriority | -2 to 2 | -1 | 4.10.0 | Key sets priorities of the AviExport utility and is used by the Video.run module while its starting: -2 – low priority (IDLE_PRIORITY_CLASS) -1 – below average priority(BELOW_NORMAL_PRIORITY_CLASS) 0 – average priority (NORMAL_PRIORITY_CLASS) 1 – above average priority (ABOVE_NORMAL_PRIORITY_CLASS) 2 – high priority (HIGH_PRIORITY_CLASS) |
| x32: (x32)\Video\AviExport x64: (x64)\Video\AviExport | BookmarkMaxLen | >0 Fractional values can be specified with comma as decimal separator (for example, "0,5") | - | 4.10.3 | Sets the length of a bookmark in hours. If the key is not created, the bookmark length is not limited. |
| х32:(X32)\Video\AVI64 x64:(x64)\Video\AVI64 | SuspendDiskSizeUpdate | 0, 1 | 0 | 4.10.5 and later | When the export period is being set, the key disables the automatic loading of indexes until the date/time control focus is removed. 0 - the indexes are loaded automatically. 1 - the indexes are not loaded until the focus is removed from the date/time controls. |
| x32: (x32)\Video\AviExport x64: (x64)\Video\AviExport | ExportDir | Path to a folder | C:\export | 4.10.0 | Specifies the directory for saving recordings exported via AviExport (Background export). |
ECHD | |||||
|---|---|---|---|---|---|
| Registry section | String parameter | Available values | Default | Product version | Parameter in effect |
| x32: (x32)\WebServer\ECHD\ x64: (x64)\WebServer\ECHD\ | ExportContainerFormat | mp4, avi, flv, mov, asf | mp4 | 4.10.1 and later | The key sets data format for archive export using Intellect HTTP API commands – see Archive export. |
| x32: (x32)\WebServer\ECHD\ x64: (x64)\WebServer\ECHD\ | AdditionalVersionString | Latin, Cyrillic, digits | - | 4.10.5 | The key sets the prefix for the Intellect version that is returned on the "getdeviceinfo" request via the HTTP API in the "firmware version" field. |
Intercom subsystem | |||||
|---|---|---|---|---|---|
| Registry section | String parameter | Available values | Default | Product version | Parameter in effect |
| х32: (х32)\MonitoringCenter\ x64: (х64)\MonitoringCenter\ | DefaultButtonWidth | >0 | 100 | 4.10.4 and later | The key sets the width of buttons (in pixels) of the Monitoring Center. The button position is changed automatically when the values are changed. |
| х32: (х32)\MonitoringCenter\ x64: (х64)\MonitoringCenter\ | DefaultRowHeight | >0 | 70 | 4.10.4 and later | The key sets the height of buttons (in pixels) of the Monitoring Center. The button position is changed automatically when the values are changed. |
| х32: (х32)\MonitoringCenter\ x64: (х64)\MonitoringCenter\ | ButtonFontHeight | Integer numbers | -11 | 4.10.4 and later | Sets font size for buttons of the Monitoring Center. |
| х32: (х32)\MonitoringCenter\ x64: (х64)\MonitoringCenter\ | clrButtonAccept | Color designation in #RRGGBB format | #FFFFFF | 4.10.4 and later | Sets the text font for the Accept button of the Monitoring Center as #RRGGBB. For example, #FFFFFF (default) is white, #00FF00 is green. |
| х32: (х32)\MonitoringCenter\ x64: (х64)\MonitoringCenter\ | clrButtonClose | Color designation in #RRGGBB format | #FFFFFF | 4.10.4 and later | Sets the text font for the Close button of the Monitoring Center as #RRGGBB. For example, #FFFFFF (default) is white, #00FF00 is green. |
| х32: (х32)\MonitoringCenter\ x64: (х64)\MonitoringCenter\ | CancelByServerEnable | >=0 | - | 4.10.4 and later | The key enables forced connection closure after the call is completed from the device web-interface. It is used in cases when, for example, there are errors in the protocol or connection problems, the command to close the call in the Monitoring Center may not come. 0 – forced connection closure is disabled. >0 – forced connection closure is enabled. |
Overview
Content Tools