Page History

MOXA cards (list of all cards which can be connected by the Moxa MX-AOPC UA Server or via SNMP is presented here)

Note. Licensing of OPC and SNMP connection differs. For OPC, the connection with the OPC Server is license-protected, while each Moxa input and output is licensed for SNMP.

Connection with OPC Wrapper:

• control relay depending on type of card;
• receive the current state of connected sensors.

Connection with SNMP Wrapper:

• receive the current state of connected sensors.

• Monitoring, control (

• FPA 1200/5000)

• receive the current state of object;
• reset the objectin its default state;
• arm/include the object in the controlled area;
• disarm/exclude the object from the controlled area;
•  set the object in Test mode;
• set the object in active state from quiet;
• set the object in quiet state from active.

• receive events about passes;
• door tampering;
• exit by button.

• monitoring of the status of a zone or an element;
• sending control commands to a group or an element;
• internal acoustic off command;
• external accoustic off command;
• summary alarm reset command.

Monitoring:

• status of a point or a zone;
• status of an output;
• status of a line;
• status of a panel;
• status of an acoustic signaling device;
• status of an UE.

Control:

• connect/disconnect a point or a zone;
• connect/disconnect an output;
• send a command to a panel.

• open/close of fire dumper;
• set the angle of fire dumper;
• receive the current state of connected devices;
• receive states of fire dumper (open, close, damage);
• control program which control all fire dumpers in case of damage;
• show temperatures inside the ventillation tunnels;
• control smoke exhaust fan.

Monitoring of the following events:

• Humidity is out-of-bounds;
• Humidity is within borders;
• Cabinet open;
• Cabinet close;
• Temp is out-of-bounds;

• Temp is within bounds;

• Power loss;

• Power connected.

Door status monitoring;
Door control.