Go to documentation repository
Page History
...
AUTO Intellect | |||||
Registry section | String parameter | Available values | Default | Product version | Parameter in effect |
x32: (x32)\LPRVIEWER | protocollimit | <1000 | - | 4.7.5 and later | Sets number of lines shown in the protocol (this parameter is for testing only). |
x32: (x32)\radar | EmulateRefreshSpeed | 1 - 2147483647 | 100 | 4.7.5 and later | Radar emulator. Sets time period (ms) for refreshing data about speed in the radar emulation mode. 0 value blocks data refreshing. |
x32: (x32)\radar | WriteSpeedOnTitles | 0, 1 | 0 | 4.7.5 and later | Defines whether to write speed values on titles. |
x32: (x32)\URMLPR | DisableUrmOutput | 0, 1 | 0 | 4.7.5 and later | Disables results output. |
x32: (x32)\URMLPR | GlobalUrmDebug | 0, 1 | 0 | 4.7.5 and later | Enables displaying CZoneInfo objects in dbgview. |
x32: (x32)\URMLPR | OneSpeedDetect | 0, 1 | 0 | 4.7.5 and later | Enables filtering the radar speed values. |
x32: (x32)\URMLPR | ReadSpeedFromTitles | 0, 1 | 0 | 4.7.5 and later | Defines whether to read speed from titles or not. |
x32: (x32)\URMLPR | TestWidth | - | 0 | 4.7.5 and later | Image width change (internal use only). |
x32: (x32)\URMLPR | TestHeight | - | 0 | 4.7.5 and later | Image height change (internal use only). |
x32: (x32)\URMLPR | Time | - | - | 4.7.5 and later | Saves time of the last viewed archive fragment in the test mode. |
x32: (x32)\URMLPR | UrmDebug | 0, 1 | 0 | 4.7.5 and later | Enables recording of tiff files to UrmDebug folder. |
x32: (x32)\URMLPR | UrmSendProcessEvents | 0, 1 | 0 | 4.7.5 and later | Sends beginning (VEHICLES_BEGIN) and ending (VEHICLES_END) parameters of license plate recognition to the core. |
x32: (x32)\URMLPR | UseTry | 0, 1 | 0 | 4.7.5 and later | Enables the seh module. |
x32: (x32)\URMLPR | WriteUraganErrorBuf | 0, 1 | 0 | 4.7.5 and later | If failure occurs, the uragan.buf file is created (only of UseTry=1). |
x32: (x32)\URMLPR\UnitTest | CountryName | Text | RUS | 4.7.5 and later | Sets the test country name. |
x32: (x32)\URMLPR\UnitTest | Enabled | 0, 1 | 0 | 4.7.5 and later | Enables/disables test. |
x32: (x32)\URMLPR\UnitTest | ExecuteSecond | > = 0 | 3 | 4.7.5 and later | Sets time of test execution. |
x32: (x32)\URMLPR\UnitTest | Number | Text | M038EH150 | 4.7.5 and later | Sets the test number. |
x32: (x32)\URMLPR\UnitTest | PlateHeightPercent | > 0 | 15 | 4.7.5 and later | Sets the test license plate height. |
x32: (x32)\URMLPR\UnitTest | PlateWidthPercent | > 0 | 25 | 4.7.5 and later | Sets the test license plate width. |
x32: (x32)\URMLPR | ParkingMode | 0, 1 | - | 5.0 | Enabling the parking mode for recognizer: 1 – parking mode is enabled. Recognition starts at ULPR|START reaction. As soon as one license plate is recognized, the recognition stops. 0 – parking mode is disabled. Recognition continues till getting the ULPR|STOP reaction. Important! For correct operation of the key make sure that the Enable on motion detection trigger checkbox is set on the settings panel of the LPR channel object corresponding to the CARMEN-parking recognition module (see Setting the joint operation of the LPR channel and the motion detector of the Intellect platform). Note. The ULPR|START and ULPR|STOP reactions are created using the scripts. Operator command, sensor triggering, motion detection tool triggering, etc. can cause the reaction. |
x32: (x32)\URMLPR | SaveRawRecognitionResult | 0,1 | 0 | 5.1 | When value = 1, the key allows saving frames transmitted from Intellect to the CARMEN Parking / CARMEN-Auto module.
When value = 1, frames are not saved. |
x32: (x32)\URMLPR | TrackOnlyRedLight | 0, 1 | 1 | 5.1 | When value = 1, the key allows fixing violations by the traffic violations detection (crossing the stop line, stop over crosswalk line, running a red light) only for vehicles which crossed the stop line on red light. |
x32: (x32)\URMLPR | MaxStoppingSpeed | 0 - 10000 | 1000 | 5.1 | Controls maximal speed in relative units (relatively from width and height of frame) at which the vehicle is still considered as the stopped vehicle (for the Stop over crosswalk line violation). |
x32: (x32)\URMLPR | RayHardwareDelay | >0 | 0 | 5.2 | Sets time (in milliseconds) corresponding to the delay with which events about green/red traffic lights are received. Example. If the key value is RayHardwareDelay=2000 and an event is received at 12:00:00, then the system thinks the event is received at 11:59:58. |
x32: (x32)\URMLPR | TimestampFontSize | >=139 | 139 | 5.2 | The key sets the text font size on the photo of the fine (containing date and time). The value is font size multiplied by 10. For instance, if the key is 139, then the font size will be 13,9pnt. |
x32: (x32)\URMLPR | ReadRayFromTitles | 0, 1 | 0 | 5.3 | The key enables the multi-stream mode emulation in IntLab. 0 – license plates recognition is performed when the ray, specified on the settings panel of the IntLab-Carriages module object, is open or closed (see Setting up the IntLab-Carriages module). 1 – information about the time when the license plates recognition is to be started is taken from the titles overlaid on the video. |
x32: (x32)\URMLPR | PlateImprover | 0, 1, 2 | 0 | 5.3 | The key sets an algorithm of frame preparation before sending it to the Carmen license plate recognition module: 0 – frames are sent to the Carmen license plate recognition module without pre-processing. 1 – rectangular areas that may contain a license plate are searched in the frame. Only those rectangular areas that may contain a license plate are then forwarded to the Carmen license plate recognition module. 2 – if any rectangular area that may contain a plate number is detected on the frame, the frame in whole is forwarded to the Carmen license plate recognition module. If the Carmen license plate recognition module detects a license plate, it tries to find another plate number, and time for recognition increases as a result. 3 – if any rectangular area that may contain a plate number is detected on the frame, the frame in whole is forwarded to the Carmen license plate recognition module. If the Carmen license plate recognition module detects a license plate, it does not try to find another license plate. |
| 0, 1, 2, 3 | 5.4 | ||||
x32: (x32)\URMLPR | SpeedField | "FASTEST", "STRONGEST" | "FASTEST" | 5.4 | "FASTEST" – a speed trap sends speed of the fastest object to the Intellect software "STRONGEST" – a speed trap sends speed of the biggest object to the Intellect software Important! If values other than above are specified for the key, the Intellect software does not recieve speed data from speed traps. |
x32: (x32)\URMLPR | Compress | 0, 1 | 1 | 5.2 | The parameter is intended for disabling compression when transferring video from the video subsystem (the Camera object) to the LPR channel, if the video subsystem and the LPR channel are on the same local computer. This allows reducing the load on the Server processor. 0 – the video is transmitted to the local LPR channel without compression. 1 – the video is transmitted to the LPR channel after compression. |
x32: (x32)\URMLPR | RemoteLpr.NearestTime | Full path to local or network folder | 0 | 5.3 | The key specifies the time difference (in milliseconds) between the moments of receiving the frame and license plate recognition event, sufficient to allow these events to be linked. The key is to be in use if data about recognized license plates are not displayed on the On-line monitor in Auto Intellect, although there are recognition events in the Debug window. |
| х32: (х32)\URMLPR x64:(х64)\URMLPR | LprDB.Path | 0, 1 | C:\ProgramData\AxxonSoft\LprDB | 5.5 | Specifies the local or network folder for storing the recognized LP images and vehicle images if the LprDB.Use key value 1 (see below) is specified. |
| х32: (х32)\URMLPR x64:(х64)\URMLPR | LprDB.Use | 0, 1 | 1 | 5.5 | Specifies the way of storing images. 0 – metadata and images are stored only in the database. 1 – metadata is stored in the database, and images are stored in the local or network folder. Full path to the folder is specified by the LprDB.Path key (see above). Note. Recognized LP numbers information is stored in the database regardless of the LprDB.Use key. |
| х32: (х32)\URMLPR x64:(х64)\URMLPR | LprDB.FreeMB | >0 | 5000 | 5.5 | Specifies the amount of free storage space in a directory. When its limit is exceeded, the overwriting process starts, rewriting the oldest images with the most recent ones. The key is used if the LprDB.Use key value is 1 (see above). |
| х32: (х32)\URMLPR x64: (х64)\URMLPR | AutoUragan.SDKVersion | 3.5, 3.7 | 3.5 | 5.5 and later | The key sets the SDK version which is being used in the Auto-Uragan software module. |
| х32: (х32)\URMLPR x64:(х64)\URMLPR | VIT.TimeoutLostNumber | >=0 | 0 | 5.5 and later | The key enables the tracking of the recognized number disappearance and sets the time in milliseconds, after which the lost number event will be generated if this number has disappeared from the camera field of view. 0 - tracking of the recognized number disappearance is disabled. >1 - after the specified time has passed, if the recognized number disappeared from the camera field of view, a lost number event will be generated. |
| х32: (х32)\URMLPR x64:(х64)\URMLPR | SaveFilterToDB | 0, 1 | 1 | 5.5 and later | The key enables saving the filtered numbers to the database. 0 - filtered numbers are saved to the database. 1 - filtered numbers are not saved to the database. |
POS-Intellect | |||||
|---|---|---|---|---|---|
Registry section | String parameter | Available values | Default | Product version | Parameter in effect |
x32: (x32)\POS | Capture | 0, 1 | 1 | 4.7.3 and later | Defines whether to store log-files or not. |
x32: (x32)\POS | Dos2Win | 0, 1 | 1 | 4.7.3 and later | Detects encoding: |
x32: (x32)\POS | GlobalTextDelay | - | 0 | 4.7.3 and later | Sets the shift of Text data from video to TextSearch. |
x32: (x32)\POS | Nohotkey | 0, 1 | 1 | 4.7.3 and later | Allows disabling hot keys used for POSVIEWER and TITLEVIEWER. If Nohotkey = 1, then when clicking |
| х32:(х32)\POS x64:(х64)\POS | DecodeUtf8 | 0, 1 | 0 | 5.0 | The key enables the UTF-8 encoding to ensure the correct display of captions in cases when the incoming to the POS terminal packages have the UTF-8 encoding. |
x32: (x32)\POS | PosLogMaxsize | >0 | 10 | 5.1 | The key sets maximum size (in MBs) of the POS terminal’s log. Note. POS terminal logging is enabled using the Capture key – see above. |
| x32: (x32)\POS x64: (x64)\POS | SetFlowControlNone | 0, 1 | 1 | 5.4 and later | COM port control. Set to 0 if POS terminal fails to operate while connecting to POS-Intellect. |
| х32:(х32)\POS x64:(х64)\POS | UseLocalTimestamp | 0, 1 | 0 | 5.4 and later | The key enables the received local timestamp conversion to UTC when creating a record in the corresponding POS-Intellect database. 0 - received local timestamp will be recorded to the corresponding database without any changes. 1 - received local timestamp will be converted to UTC when creating a record in the corresponding database. |
| х32:(х32)\POS x64:(х64)\POS | UseLastCashierInfo | 0, 1 | 0 | 5.4 and later | In case the D-store POS-terminals are used, the key enables saving the info about the last cashier whose data was received by the POS-terminal. Until there is no data, the following default values are used: cashier_name = "Jane B."; cashier_number = "1147911"; 0 - the info about the last cashier whose data was received by the POS-terminal, is not saved. 1 - the info about the last cashier whose data was received by the POS-terminal, is saved. |
| х32:(х32)\POS x64:(х64)\POS | NewReceipt.Use | 0, 1 | 0 | 5.4 and later | In case the D-store POS-terminals are used, the key enables initiating the receipt creation by any data input. In addition to that, the text line specified in the NewReceipt.Word key (see below) is added to the receipt text. 0 - the receipt creation is initiated by the word specified to trigger the receipt creation. 1 - the receipt creation is initiated by any data input, and the text line specified in the NewReceipt.Word key (see below) is added to the receipt text. Note. This key works only if the UseLastCashierInfo key (see above) is enabled. |
| х32:(х32)\POS x64:(х64)\POS | NewReceipt.Word | String value | NEW RECEIPT | 5.4 and later | The key enables specifying the text line which will be added to the receipt text if the NewReceipt.Use key (see above) is enabled. |
| х32:(х32)\POS x64:(х64)\POS | PrintTime | 0, 1 | 0 | 5.4 and later | The key activates displaying in the Monitor the time (UTC) when each caption appeared. 0 - the captions timestamps (UTC) are not displayed in the Monitor. 1 - the captions timestamps (UTC) are displayed in the Monitor. |
ATM-Intellect | |||||
|---|---|---|---|---|---|
Registry section | String parameter | Available values | Default | Product version | Description |
x32: (x32-ATM/Monitoring) x64: (x64-ATM/Monitoring) | PeakWorkingSetSizeQuota | >=0 | 100 | from 8.0 | The maximum memory size in megabytes used by the process videosrv.exe on ATM-Intellect Pro. If the parameter is set to 0, then the check for the used memory is not performed. Once a day, the ATM-Intellect Prochecks the size of the memory it uses. The check is performed at the time specified by the TimeOfCheckWorkingSetSize key (see below). After exceeding the specified value, the videosrv.exe module is rebooted. |
x32: (x32-ATM/Monitoring) x64: (x64-ATM/Monitoring) | TimeOfCheckWorkingSetSize | >=0 | 3 | from 8.0 | Time to check memory usage in hours. Default value is 3 (3:00 AM). See also the PeakWorkingSetSizeQuota key description above. |
x32: (x32-ATM/Monitoring) x64: (x64-ATM/Monitoring) | StoreVideoFiles | >0 | 3 | from 5.0 | Time period for storage of not completely downloaded files on ATM-Intellect Pro. After the storage period is exceeded, the not completely downloaded files are deleted. |
x32: (x32-ATM/Monitoring) x64: (x64-ATM/Monitoring) | run_intellect | 0.1 | 1 | from 5.0 | The key sets the ATM-Intellect Pro actions in case if the Intellect software is shut down. 0 – do not start the Intellect software 1 – start the Intellect software |
x32: (x32-ATM/Monitoring) x64: (x64-ATM/Monitoring) | socket_connect_tout | >=0 | 0 | from 5.0 | The key defines TCP/IP connection mode with ATM-Intellect Workstation. 0 – blocking mode. ATM-Intellect Pro connects to ATM-Intellect Workstation without specifying connection timeout. >0 – non-blocking mode. ATM-Intellect Pro connects to ATM-Intellect Workstation with a connection timeout set by the socket_connect_tout > 0 parameter in seconds. |
x32: (x32-ATM/Monitoring) x64: (x64-ATM/Monitoring) | write_buffer_enable | 0.1 | 1 | from 7.0 | Data buffering while recording on disc when receiving video data on ATM-Intellect Workstation. ATM-Intellect Pro transfers video data to ATM-Intellect Workstation in packages of 800 to 4096 bytes (4096 by default). When buffering is enabled, a 264 Kb block of memory is allocated to the ATM-Intellect Workstation for receiving video data, and data is saved to the disk when this memory block is full, not every time a packet is received from ATM-Intellect Pro. 0 – buffering is enabled. 1 – buffering is disabled. |
x32: (x32-ATM/Monitoring) x64: (x64-ATM/Monitoring) | stop_data_by_trx | 0.1 | 1 | from 5.0 | The key determines the actions of ATM-Intellect Pro in case if, during the transfer of video data to ATM-Intellect ARM, a financial transaction has begun on the ATM. 0 – video data transfer is not stopped. 1 – video data transfer is suspended until financial transaction if completed. |
x32: (x32-ATM/Monitoring) x64: (x64-ATM/Monitoring) | financial_trx_tout | >0 | 60 | from 7.0 | Timeout for waiting for the financial transaction to complete in minutes. If after the start of the financial transaction during the time-out, there is no message from the ATM about its end, it will be considered to be completed. |
x32: (x32-ATM/Monitoring) x64: (x64-ATM/Monitoring) | OldLogPanel | 0, 1 | 0 | from 11.0 | The key changes the Log Panel interface color theme. 0 - dark interface theme. 1 - light interface theme. |
x32: (x32-ATM/Monitoring) x64: (x64-ATM/Monitoring) | StreamViewerExportPath | Text | <Intellect installation directory>\export | from 11.0 | The key specifies the path to the catalog of frames and video clips which were exported from the Monitoring interface during the live and archive video playback from a certain camera. See Playing back live video and archive from a specific camera. |
x32: (x32-ATM/Monitoring) x64: (x64-ATM/Monitoring) | MonitoringReserving | 0, 1 | 0 | from 11.0 | The key removes the restriction on adding the same cameras for tracking in different Surveillance Objects. 0 - the restriction is enabled. 1 - the restriction is removed. |
x32: HKLM\SOFTWARE\BitSoft\MonitorSSTV\Loader x64: HKLM\SOFTWARE\Wow6432Node\BitSoft\MonitorSSTV\Loader | UseBulkInsert | 0, 1 | from 10.0 | The key accelerates the speed of data loading from files to the MonitorSSTV database by activating the group operator of data loading if the database is installed locally. 0 - do not use the BULK INSERT operator (if the SQL Server is remote) | |
x32: (x32-ATM/Monitoring) x64: (x64-ATM/Monitoring) | PrefixForTimeOut | Text | - | from 10.0 | The key specifies the prefix in the identifier of the Surveillance Objects for which the waiting timeout specified in the TimeoutForPrefix key should be specified. |
x32: (x32-ATM/Monitoring) x64: (x64-ATM/Monitoring) | TimeoutForPrefix | >0 | 6 | from 10.0 | The key sets the waiting timeout in minutes for the ATM-Intellect Workstation to receive the packets with the technical state of ATM-Intellect Pro. After this time the "No connection" error will be displayed. |
x32: (x32-ATM/Monitoring) x64: (x64-ATM/Monitoring) | UsingTimeoutForPrefix | 0, 1 | 0 | from 10.0 | The key enables the waiting timeout set in the TimeoutForPrefix key for all Surveillance objects with the identifier prefix specified in the PrefixForTimeOut key. |
| HKEY_CURRENT_USER\SOFTWARE\BitSoft\MonitorSSTV | MAXRECORDSONPAGE | 1,000 - 2,000,000,000 | 10,000 | from 11.0 | Sets the maximum number of events to be displayed in the Event Log window without navigation buttons. |
Restricting the Operator’s access to the camera's functional menu and its options | |||||
x32: HKEY_LOCAL_MACHINE\SOFTWARE\BitSoft\VHOST\CamMonitor x64:HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\BitSoft\VHOST\CamMonitor | MENU_DISABLE_OPTION | 0, 1 | 0 | from 11.0 | The key hides the camera's menu. 0 - The menu is displayed. 1 - The menu is hidden. |
x32: HKEY_LOCAL_MACHINE\SOFTWARE\BitSoft\VHOST\CamMonitor x64:HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\BitSoft\VHOST\CamMonitor | MENU_ARM_DISABLE_OPTION | 0, 1 | 0 | from 11.0 | The key hides the Arm menu option. 0 - The Arm menu option is displayed. 1 - The Arm menu option is hidden. |
x32: HKEY_LOCAL_MACHINE\SOFTWARE\BitSoft\VHOST\CamMonitor x64:HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\BitSoft\VHOST\CamMonitor | MENU_REC_DISABLE_OPTION | 0, 1 | 0 | from 11.0 | The key hides the Start recording menu option. 0 - The Start recording menu option is displayed. 1 - The Start recording menu option is hidden. |
x32: HKEY_LOCAL_MACHINE\SOFTWARE\BitSoft\VHOST\CamMonitor x64:HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\BitSoft\VHOST\CamMonitor | MENU_CAMS_DISABLE_OPTION | 0, 1 | 0 | from 11.0 | The key hides the Camera menu option. 0 - The Camera menu option is displayed. 1 - The Camera menu option is hidden. |
x32: HKEY_LOCAL_MACHINE\SOFTWARE\BitSoft\VHOST\CamMonitor x64:HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\BitSoft\VHOST\CamMonitor | MENU_TITLES_DISABLE_OPTION | 0, 1 | 0 | from 11.0 | The key hides the Show titles menu option. 0 - The Show titles menu option is displayed. 1 - The Show titles menu option is hidden. |
x32: HKEY_LOCAL_MACHINE\SOFTWARE\BitSoft\VHOST\CamMonitor x64:HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\BitSoft\VHOST\CamMonitor | MENU_PROCESSING_DISABLE_OPTION | 0, 1 | 0 | from 11.0 | The key hides the Processing menu option. 0 - The Processing menu option is displayed. 1 - The Processing menu option is hidden. |
x32: HKEY_LOCAL_MACHINE\SOFTWARE\BitSoft\VHOST\CamMonitor x64:HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\BitSoft\VHOST\CamMonitor | MENU_EXPORT_DISABLE_OPTION | 0, 1 | 0 | from 11.0 | The key hides the Export menu option. 0 - The Export menu option is displayed. 1 - The Export menu option is hidden. |
| Restricting the Operator’s access to the Processing menu within the camera's functional menu | |||||
x32: HKEY_LOCAL_MACHINE\SOFTWARE\BitSoft\VHOST\CamMonitor x64:HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\BitSoft\VHOST\CamMonitor | MENU_PROCESSING_DEINTERLACE_DISABLE_OPTION | 0, 1 | 0 | from 11.0 | The key hides the Deinterlacing menu option. 0 - The Deinterlacing menu option is displayed. 1 - The Deinterlacing menu option is hidden. |
x32: HKEY_LOCAL_MACHINE\SOFTWARE\BitSoft\VHOST\CamMonitor x64:HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\BitSoft\VHOST\CamMonitor | MENU_PROCESSING_ZOOM_DISABLE_OPTION | 0, 1 | 0 | from 11.0 | The key hides the Zoom-in menu option. 0 - The Zoom-in menu option is displayed. 1 - The Zoom-in menu option is hidden. |
x32: HKEY_LOCAL_MACHINE\SOFTWARE\BitSoft\VHOST\CamMonitor x64:HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\BitSoft\VHOST\CamMonitor | MENU_PROCESSING_CONTRAST_DISABLE_OPTION | 0, 1 | 0 | from 11.0 | The key hides the Contrast menu option. 0 - The Contrast menu option is displayed. 1 - The Contrast menu option is hidden. |
x32: HKEY_LOCAL_MACHINE\SOFTWARE\BitSoft\VHOST\CamMonitor x64:HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\BitSoft\VHOST\CamMonitor | MENU_PROCESSING_MASK_DISABLE_OPTION | 0, 1 | 0 | from 11.0 | The key hides the Detector mask menu option. 0 - The Detector mask menu option is displayed. 1 - The Detector mask menu option is hidden. |
x32: HKEY_LOCAL_MACHINE\SOFTWARE\BitSoft\VHOST\CamMonitor x64:HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\BitSoft\VHOST\CamMonitor | MENU_PROCESSING_SHARPNESS_DISABLE_OPTION | 0, 1 | 0 | from 11.0 | The key hides the Sharpen menu option. 0 - The Sharpen menu option is displayed. 1 - The Sharpen menu option is hidden. |
| Restricting the Operator’s access to the CamMonitor component buttons | |||||
x32: HKEY_LOCAL_MACHINE\SOFTWARE\BitSoft\VHOST\CamMonitor x64:HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\BitSoft\VHOST\CamMonitor | BUTTON_ARCH_DISABLE_OPTION | 0, 1 | 0 | from 11.0 | The key hides the Archive button. 0 - The Archive button is displayed. 1 - The Archive button is hidden. |
x32: HKEY_LOCAL_MACHINE\SOFTWARE\BitSoft\VHOST\CamMonitor x64:HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\BitSoft\VHOST\CamMonitor | BUTTON_TIME_DISABLE_OPTION | 0, 1 | 0 | from 11.0 | The key hides the time. 0 - The time is displayed. 1 - The time is hidden. |
x32: HKEY_LOCAL_MACHINE\SOFTWARE\BitSoft\VHOST\CamMonitor x64:HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\BitSoft\VHOST\CamMonitor | BUTTON_NAME_DISABLE_OPTION | 0, 1 | 0 | from 11.0 | The key hides the camera name. 0 - The camera name is displayed. 1 - The camera name is hidden. |
x32: HKEY_LOCAL_MACHINE\SOFTWARE\BitSoft\VHOST\CamMonitor x64:HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\BitSoft\VHOST\CamMonitor | BUTTON_MENU_DISABLE_OPTION | 0, 1 | 0 | from 11.0 | The key hides the Menu button. 0 - The Menu button is displayed. 1 - The Menu button is hidden. |
| Restricting the Operator’s access to the CamMonitor control via the keyboard and mouse | |||||
x32: HKEY_LOCAL_MACHINE\SOFTWARE\BitSoft\VHOST\CamMonitor x64:HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\BitSoft\VHOST\CamMonitor | KEYS_DISABLE_OPTION | 0, 1 | 0 | from 11.0 | The key disables the control over the CamMonitor component using the hotkeys available for Video Monitor (see Video Monitor). 0 - The control over the CamMonitor component using the hotkeys is enabled. 1 - The control over the CamMonitor component using the hotkeys is disabled. |
x32: HKEY_LOCAL_MACHINE\SOFTWARE\BitSoft\VHOST\CamMonitor x64:HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\BitSoft\VHOST\CamMonitor | TELEMETRY_ENABLE_OPTION | 0, 1 | 0 | from 11.0 | The key enables the Telemetry control using the CamMonitor component (see Telemetry control). 0 - The Telemetry control using the CamMonitor component is disabled 1 - The Telemetry control using the CamMonitor component is enabled. |
...
Overview
Content Tools