Page History

To open the properties window for a Camera object, see the Editing objects properties in the template editor section.

As a result the Camera properties window the window will open containing the properties of the corresponding object.

Image Added

To edit the properties of the Camera object, do the following:

1. From the Camera drop-down list (1) select the camera object from which displaying of video signal to the created field will be performed

Editing of Camera object properties is completed.

Image Removed

Image Removed

Image Removed

1. .
2. From the Compression drop-down list (2) select the video stream compression level:
   Image Added
   • Stream from camera - the video from the camera is transmitted to the client without any changes.
   • Frames (no compress) - the video from the camera is unpacked and the uncompressed stream is transmitted to the client.

   • Frames (compression 1) to Frames (max compression) - the video from the camera is unpacked, compressed in MJPEG or MWavelet and transmitted to the client.

     Note
     title Attention!
     Using the video stream compression mechanism places a heavy load on the video server processor, especially when using several Event manager objects. Therefore, it is recommended to use the Stream from camera mode and use a stream of a lower resolution and quality (see the stream selection setting below).

     
     

3. From the Dispaly mode drop-down list (3) select the display mode:

   • Stream - displays the video stream in real time.

   • Archive - displays the video archive, paused at the time of the event.

     Info
     title Note
     If you choose the Archive display mode, make sure that the video archive is recorded.

     
     

     Image Added
4. From the Stream drop-down list (4) select the required video stream.
   Image Added

Editing of the Camera оbject properties is complete.

Image Removed