Page History

...

By default, the following alarms will become available in the Detection Tools alarm group:

These alarms are designed for the special mode of Monitoring operation with ACFA Intellect (see Configuring the special mode of Monitoring operation with ACFA Intellect). However, these alarms can be used to monitor the state of the relay, for example, to generate a short and long alarm when the relay switches from the Relay on to the Relay off state, and another short alarm when the relay switches from the Relay off to the Relay on state.

...

1. In the System Settings dialog box, go to the Programming tab (1).
   
2. Create the Script object (2) on the basis of the Scripts object in the object tree.
3. If you are configuring the special mode of Monitoring operation with ACFA Intellect, it is necessary to copy the contents of a sample script from the page Sample scripts for determining the current state of the zones of the Rovalant (A6, A16) object on the Agent of Control side.
4. If you are configuring the monitoring of the relay state, it is necessary to copy the contents of a sample script from the page на странице Пример скрипта для определения текущего состояния реле на стороне Агента КонтроляSample scripts for determining the current state of the relay on the Agent of Control side.

5. Click Apply (3).

Operating procedure

...