Go to documentation repository
Page History
...
To set up the detector parameters, do the following:
- In the System Settings dialog window, open the Hardware tab (1).
- In the object tree on the left side of the Hardware tab (2). The settings panel of the selected object will open on the right side of the windowGo to the settings panel of the LPR channel object corresponding to the activated software module (see Activating the program module, used for identifying the plates).
- Enter the value in the Search Area search threshold field (31).
Set the Max. width and Max. height parameters:
4.1 Click the X the (2) button next to the parameters. Interactive interface of setting up the zone parameters (4) showing the image from the corresponding camera will downloadbe displayed.
4.2 At the appropriate moment, click the Stop video button and then hold the mouse while dragging it across the required area and click OK button.Info title Note. You can select the zone in the Real Time Video mode as well (see The Traffic Monitor setup procedure section).
Results of setting the parameters will be automatically entered in the Max. width and Max. height fields.
- Set the Min. width and Min. height parameters by analogy with Max. width and Max. height parameters – see item 4 (5using the button (3).
If necessary set the Ignore Skip unrecognized LPs checkbox (64).
Info title Note. You can set unrecognized license plates ignoring when using CARMEN-Auto, ARH-Containers and VIT This setting is only available for the Auto-URAGAN program modules.
If necessary set the Cut area image with carvehicle checkbox (75).
Info title Note. Setting up the frame with a car cut is used only in case of working with megapixel video surveillance cameras.
Info title Note. Setting up the frame with a car cut is available also with the use of VIT Seenaptec program module.
- Click Apply button (8).
...