Page History

...

To enable automatic recording functionality and to specify the recording duration, do the following:

1. In the System Settings dialog window, open the Hardware tab.
2. Select the LPR channelGo to the LPR channel object settings panel (2), corresponding to the activated program module, in the objects tree on the Hardware tab (see  Auto-Uragan or CARMEN-Auto module (see Activating the program module, used for identifying the plates section, 2). The settings panel of the selected object will open on the right side of the window.
   

3. Check Set the Auto recording checkbox to enable recording the video upon recognizing an LP number (3).

   Info
   title Note.
   For correct auto recording when working with the IntLab-Carriage program module specify the Pre-alarm record parameter in the settings panel of the Camera object (see Configuring video in the Pre-alarm record mode).

   
   

4. In the field next to the checkbox (4), specify for how many seconds the video should be recorded after LP number recognition (4).

   Info
   title Note.
   Zero (0) in this field means that the recording starts at the moment of LP recognition and continues indefinitely.

   
   

5. Click Apply (5).

...