Page History

...

1. Go to the LPR channel object settings panel (2), corresponding to the activated module (see Activating the program module, used for identifying the plates section).
   
2. From the Direction drop-down list (1), select the traffic direction relative to the camera in which it is necesary to recognize the LP numbers (3).
3. Set the Undefined checkbox (42) if it is necessary to display the direction as Undefined in the Vehicle Tracker module, if it is not possible to determine the vehicle direction.

4. If the from the camera or to the camera value is selected in the Direction dropdown list, the Record violation checkbox becomes available (53). By default this checkbox is set. That means that in case if the direction of vehicle moving is not coincide with the specified value, the Entering an oncoming lane alarm event will be created. If this event should not be created, uncheck the checkbox.

   Info
   title Note.
   The following variations are possible depending on selecting the traffic direction: if the to the camera direction is selected and the Record violation checkbos is set the recognition is performed in both direction; if traffic is performed from the camera the alarm event will be created; if the from the camera direction is selected and the Record violation checkbos is set the recognition is performed in both direction; if traffic is performed to the camera the alarm event will be created; if the to the camera direction is selected and the Record violation checkbos is not set the recognition is performed only in direction to the camera; if the from the camera direction is selected and the Record violation checkbos is not set the recognition is performed only in direction from the camera;

   
   

5. Click Apply (64).

The vehicle movement direction is now selected.