Page History

The Auto-Intellect software module supports the wide list of Radar type devices. Selecting of connected device is performed via Speed traps server object corresponding to the configured Radar software.

To select the model of model and installation mode of Radar device, do the following:

1. Open the Hardware tab in the System Settings window (1).
2. In the object tree on the left side of the Hardware tab, select Go to the Speed-trap traps server object (2) representing the Radar module to be set up. The settings panel of the selected object will open on the right side of the window (2).
   

3. Specify the model of Radar device from From the Model drop-down list of supported devices (3) select the model of the supported installed Radar device.

   Note
   title Attention!
   Correct operation of the Iskra-1, Iskra-1B, Iskra-1D, Iskra-1KRIS models is not guaranteed.

   
   

4. From the Type drop-down list select the installation mode of Radar device:
   • Stationary - if the Radar device is installed stationary.

   • Moving - if the Radar device is installed on moving vehicles.

     Info
     title Note
     The availability of the Type drop-down list depends on the selected Radar device model.

     
     

5. Click Apply (4).

The process of selecting the module of Radar devise and installation mode of Radar device is completed.