Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Select the movement direction of the vehicles to detect their speed – toward or away from the speed-trap.

To select the vehicle movement direction and distance, do the following:

  1. Open the Hardware tab in the System Settings window (1).
  2. In the object tree on the left side of the Hardware tab, select the Speed-trap server object Go to the Speed-traps server object (2representing the Radar module to be set up. The settings panel of the selected object will open on the right side of the window (2).
  3. In From the Target drop-down list (3), select the vehicle movement direction (3).
    Select Oncoming to make the speed-trap detect the speed of the oncoming traffic.
    Select Passing to make the speed-trap detect the speed of passing traffic.
    Select Automatically to make the speed-trap automatically select the movement directiondirection relative to the Radar device to determine its speed of movement.
    • Automatically - to automatically determine the vehicles speed moving relative to the Radar device;
    • Oncoming - to determine the vehicles speed moving oncoming to the installed Radar device;
    • Passing - to determine the vehicles speed moving from the installed Radar device.
  4. When configuring the Auto-URAGAN or CARMEN-Auto software modules, from the Distance drop-down list, select the distance from the Radar device to the place where the vehicle speed is determined.
  5. Click Apply (4).

The vehicle movement direction and distance is now selected.