Page History

...

If any of these values exceeds the limit, it is highlighted in red color in the Traffic Monitor (see the Auto-Intellect Software Package. The Operator's Guide document Using the Traffic Monitor interface object), and the alarm notification window can be set to open.

To specify the traffic limits, do the following:

1. Open the Hardware tab in the System Settings window (1).
2. In the object tree on the left side of the Hardware tab, select the Traffic Detector object representing the Traffic Detector module to be set up. The settings panel of the selected object will open on the right side of the window Go to the Traffic Detector object settings panel (2).
   
3. In the Speed limit, km/h field (3), enter the maximum allowed driving speed.

4. In the Road load Traffic jam threshold, % field (4), enter the maximum allowed road load.

   Info
   title Note.
   The road load parameter is calculated using the following formula:  , where T0 where Image Added is the total of the time periods when time during which the vehicles were present in the loop detector zone, and T is the time period set in the Statistics update time fieldin the coverage area of the Traffic Detector software module for the statistics update period, and Image Added is the total operating time of the Traffic Detector software module for the statistics update period (see Setting up the statistics update period).

   
   

5. Click Apply (65).

The traffic limitations are now set.