Go to documentation repository
Page History
Rules of the indicator state change enable changing the BACnet object indicator on the map in case the value of a parameter property falls into a given range.
...
- Check the Enable box to activate the rule.
- In the Sign column: , select the sign that will define the value range. The list of recognized signs differs for each supported value type, see the table below.
- In the Value column: enter the parameter , enter the property value that will define the value range. The value must match the formatting rules for the data type of the BACNet parameter BACNet property the rule is configured for, see Configuring the parameters of BACnet channels.
OR
In the Minimum value and Maximum value fields: , specify the interval the value must fall into. - In the Red, Green and Blue columns: , define the indicator colour according to the RGB model.
- Click the Apply button to save the changes.
...
| Note | ||
|---|---|---|
| ||
If the value of the parameter the property falls into several intervals, the indicator will take the colour according to the rule with the least order number. |
The signs available for different value types are listed in the table below:
| Value Type | Signs |
|---|---|
| Unsigned Int | =, !=, <, >, <=, >= |
| Signed Int | =, !=, <, >, <=, >= |
| Real | =, !=, <, >, <=, >= |
| Double | =, !=, <, >, <=, >= |
Overview
Content Tools