Page History

You can configure the access plan settings of a Hikvision reader via the Hikvision 26X Reader, Hikvision 28X Reader, and Hikvision K1T605XF Reader objects configuration panel, which are created on the basis of the Hikvision 26X, Hikvision 28X, and Hikvision K1T605XF objects manually or automatically after reading the configuration from the corresponding controller (see Network settings of the Hikvision controller and Configuring the Hikvision controller). As an example of configuring the access plan settings of a Hikvision reader, let's consider a Hikvision 26X controller.

To configure the Hikvision reader access plan settings

...

, do the following:

...

1. Go to the

...

1.  Hikvision 28X Reader object setup panel.
   Image Modified
2. Click on the Access

...

1. plan setup button. The Reader

...

1. access plan setup window opens.
   Image Modified

...

1. In the area (1), set the required access type.

   Info
   title Note.
   The Sleep access type stands for the sleep mode. The reader is not operable in this mode. The Card + Pass access type means that you first need to swipe the card and then enter the password, only then the access is granted. The Card/Auth.Pass access type means that you can swipe the card OR enter the password to access.

   
   

2. In

...

1. column (2),

...

1. select the day of the week, and using the mouse, set the time interval for this access type in the corresponding line in area (3).

...

1. If necessary, adjust the time interval in area (4)

...

1. , where the left field indicates the beginning time, and the right field indicates the ending

...

1. time of this time interval.
2. Click

1. OK (5)

...

1. to save

...

1. the settings.
2. Click Apply (2).

The access schedule for plan settings of the Hikvision reader is are now configured.