Page History

№

Parameter name

Parameter setting method

Description

Data type

Default value

Value range

2

Select cameras group

License plates recognition drop-down list

Select value from the list

Main video camera for license plate recognition

List of available Camera objects

Camera 1

Depending on the number of available Camera objects

Synchronous pickup drop-down list

Select value from the list

Additional video camera operating together with the main camera

List of available Camera objects

None

Depending on the number of available Camera objects

Auto recording checkbox

Set the checkbox

Enabling the automatic recording on the LP number recognition

Boolean

No

Yes – automatic recording enabled,

No – automatic recording disabled

Auto recording field

Enter the value in the text field

Setting the auto recording duration (in seconds)

Seconds

10

0 - 1000

For normal mode:

Yes –  if the camera is armed, the LPR channel scans all video images til the basic motion detection of the Intellect software is in the Alarm mode; If the camera is not armed, the LPR doesn't work, but manual start using scripts is available (see item 6 in the Scripts used in the Auto-Intellect software package section). Recognition will process frames untill the stop command will be done.

No – the LRP channel scans video images permanently.

For Parking mode:

Yes –if the camera is armed, the LPR channel scans all video images, until the plate will be recognized, after it recognition stops even if the Alarm mode is still in process and procedure repeats when the new trigger of alarm is activated; if the camera is not armed, the LPR doesn't work, but manual start using scripts is available (see item 6 in the Scripts used in the Auto-Intellect software package section). Recognition will process frames untill the plate will be recognizied and then will stop before new manual start.

No – the LRP channel scans video images permanently

3

Settings button 
(is not used when the Carmen-Auto, ARH-Containers, or VIT modules are enabled)

Click the button

Access to frame sign settings

-

-

-

Area search threshold field.
Is available if the Auto-Uragan, IntelliVision LPR modules are activated

Enter the value in the text

field

Detecting zone sensitivity

Number

20

Unlimited (20 to 60 recommended)

Max. width

field.
Is available if the Auto-Uragan, IntelliVision LPR, IntLab, VIT modules are activated

Enter the value in the text field

Maximum

available width of license plate

Percentage of frame width

21

Unlimited

Max. height

field.
Is available if the Auto-Uragan, IntelliVision LPR, IntLab modules are activated

Enter the value in the text field

Maximum

available height of license plate

Percentage of frame height

9

Unlimited

Button X
Is

available if the Auto-Uragan, IntelliVision LPR modules are activated

Click the button

Access to the interactive interface of setting the area width and height

-

-

-

Min. width field.
Is

available if the Auto-Uragan, IntelliVision LPR, VIT modules are activated

Enter the value in the text field

Minimum

available width of license plate

Percentage of frame width

-

Unlimited

Min. height field.
Is

available if the Auto-Uragan, IntelliVision LPR modules are activated

Enter the value in the text field

Minimum

available height of license plate

Percentage of frame width

-

Unlimited

Button X
Is

available if the Auto-Uragan, IntelliVision LPR modules are activated

Click the button

Access to the interactive interface of setting the area width and height

-

-

-

Cut image with vehicle checkbox.
Is available if the Auto-Uragan, IntelliVision LPR, CARMEN-Auto, Remote recognition modules are activated

Set the checkbox

Set up the detection settings to the image with a car

Boolean

No

Yes - frame with a

vehicle is cut

No - frame with a

vehicle is not cut

Enabling the

option of the LP number search area boundaries setting

Yes

- the option of the LP number search area boundaries setting is enabled

No

- the option of the LP number search area boundaries setting is disabled

Select value from the list

Setting the traffic direction to detect the LP numbers

List of

available Direction objects

Any

Any
Towards the camera
Away from the camera

Record violation checkbox.
Only used when direction is selected in the Direction list (Towards the camera/
Away from the camera)

Set the checkbox

Enabling event generating in case of vehicle entering an oncoming lane

Boolean

Yes

Yes – in case if the direction of vehicle moving is not coincide with the specified in the Direction list, the Entered the oncoming lane alarm event will be created.
No – the Entered the oncoming lane alarm event is not created.

Show results before

vehicle leave checkbox.
(is not used

if the ARH-Containers

, Arena

 or Remote recognition

modules are enabled)

Set the checkbox

Enabling the results to be displayed before the car leaves the viewing zone

Boolean

Yes

Yes – the result is displayed before

the vehicle leaves
No – the result is displayed after the

vehicle leaves

Delay of showing results field.
(is not used

if the ARH-Containers

, Arena or Remote recognition

modules are enabled)

Enter the value in the text field

The time delay between the first recognition of the LP number and displaying the results

Seconds

3

0 - 100

Recognition number threshold field.
(is not used

if the ARH-Containers

, Arena

 or Remote recognition

modules are enabled)

Enter the value in the text field

The number of reliable recognitions to give the result

Number

2

0 - 1000

Record frames to SQL DB checkbox

Set the checkbox

Saving video frames of vehicle's recognized number into SQL DB

Boolean

Yes

Yes – the frame with a vehicle is saved into the database
No – the frame with a vehicle is not saved into the database

Show

captions checkbox

Set the checkbox

Enabling the LP number titles overlaid with the video image while making report about the recognized number

Boolean

Yes

Yes –

captions overlay enabled
No

– captions overlay disabled

Deinterlace checkbox

Set the checkbox

Enables deinterlacing of video frame with a vehicle when the image is received in full resolution

Boolean

No

Yes - deinterlacing of video frame with a vehicle is implemented
No– deinterlacing of video frame with a vehicle is not implemented

Ratio 4:

3 checkbox

Set the checkbox

Set the ratio 4:3 of video frame's width and height while making report about the recognized number

Boolean

Yes

Yes –

video frame with a vehicle is displayed in ratio 4:3
No – initial ratio of the frame while making report about the recognized number is not changed

Archive size, days field

Enter the value in the text field

Database archive depth

Days

30

0 - 10000

Speed camera settings drop-down list

Select the value from the list

Selecting the speed camera

to work together with

LPR Channel

List of available

Radar objects

Not specified

Depending on the number of

available Radar objects

Synchronization time

field

Enter the value in the text field

The time it takes the car to move from the point of speed detection by the Radar module to the viewing zone of the camera

Milliseconds

Not specified

0 - 20000

Filter events from

speed camera checkbox

Set the checkbox

Enables saving the first speed detected only

Boolean

No

Yes – only the first detected speed value is used, others are ignored until the delay expires or the number is recognized
No – all speed values are used

Yes – vehicle speed is estimated by video, the results are displayed over video image as captions.

No – vehicle speed is not estimated by video.