Page History
The following figure shows the settings panel of the Face Recognition Server.
The General settings tab.
Description of settings is given in the following table.
...
Description of settings is given in the following table.
№ | Parameter | Method for entering the parameter value | Parameter description | Symbols used | Default value | Value range |
|---|---|---|---|---|---|---|
| 1 | Access event generation checkbox | Set checkbox | Enables/disables the Pass event generation when the face is recognized | Boolean type | No | Yes - the access event is generated No - the access event is not generated |
| 2 | Indicate similar faces checkbox | Set checkbox | Enables/disables the grouping of similar faces | Boolean type | No | Yes - the grouping of similar faces is enabled No - the grouping of similar faces is disabled |
Temperature group | ||||||
3 | Threshold field | Enter the value into the field | Sets the temperature in degrees Celsius; when this value is exceeded, the TEMPERATURE_ALARM event is generated. | °C | 37 | <>= 0 |
4 | Combined work with thermal camera checkbox | Set checkbox | Enables/disables the FIND_PERSON event generation only when the temperature is received from the thermal camera or after the time, specified in the Thermal camera reply timeout, sec parameter | Boolean type | No | Yes - the combined work with thermal camera is enabled No - the combined work with thermal camera is disabled |
| 5 | Thermal camera reply timeout, sec field | Enter the value into the field | Sets the timeout in seconds for the reply from the thermal camera with the temperature | Time in seconds | 1 | >= 0 |