Page History

The connection is configured in the Connection section as follows:

1. Set the Autoconnect checkbox (1) if it is necessary to automatically connect to the last previously connected Server at the app launch.

2. The Cloud server url parameter (2) displays the URL address of the AxxonNet Server

To configure the connection:

1. In the Connection speed field (1), select the maximum fps rate when connecting to the Internet: Maximum: 9 fps, Normal: 6 fps, Slow: 3 fps.

   Image Removed

2. Enable the Autoconnect feature (2) if the auto connection to the latest Server is required at the app start.

3. Enable the Check config updated feature (3) to periodically check if the Server configuration is changed, and if so, to suggest reconnecting to the Server and apply the changes.

   Info
   title Note
   If the Check config updated feature is disabled, and the Server configuration is changed, then the changes will be applied only on the next app start.

   Image Removed

4. In the Config autoupdate interval field (4) set the time interval to check the Server configuration changes.

Enable the Enable automatic redirect http to https (5) parameter if it is necessary to enable the automatic redirect to HTTPS — if the HTTP protocol is specified in the Axxon Next Server connection URL address. Otherwise, when connected to the Server, you will be requested to automatically change the Server URL-address to HTTPS.


Info
title Note.
This setting is valid only when connecting to the Axxon Next Server.

Image Removed

5. It is strongly recommended not to change this address without consulting AxxonSoft Support.

   
   

6. Select the interval for the video update on the widgets (3): 10 sec, 1 min, 5 min, 10 min, 1 hour.

The connection is now configured.