Page History

The push notifications are configured in the Pushes section as follows:

Image Added

1. In the Notifications period parameter (1) select

To configure the events receiving, do the following: 

1. By default, the Android Mobile Client auto updates the Server events in the specified time period. To stop the events auto updating, disable the corresponding parameter (1).
   Image Removed
2. Select

   the autoupdate interval for events:

    5 seconds, 10 seconds or 1 minute (2).

   • No limit (push notification will be displayed at the moment of event);

   • 5 seconds;

   • 10 seconds;

   • 1 minute.

   Info
   title Note
   After changing the notifications period, it is necessary to restart the application.

   
   

3. Set the Show images checkbox (2) to display the images in push notificationsTo disable the images display in push notifications, disable the Show images parameter (3).

   Info
   title Note
   It is possible to receive push notifications from the Server Axxon Next Server in case the the alarm event on camera is detected.

   
   

4. To enable the push notifications receiving, perform the following actions in the direct order: 

   1. Connect to the required Axxon Next Server (see Connecting to the server and working with servers in the Android clientConnection and Server operations in AxxonNet client on Android OS). 

      Note
      title Important!
      To receive push notifications from the Axxon Next Server, connect this Server to the AxxonNet cloud service (see AxxonNet Setup and Operation). The push notifications from Axxon Next Server can be sent to mobile devices automatically and manually when initiating an alarm event: To send push notifications automatically, it is necessary to configure the corresponding macro to initiate an alarm event on the detector (see Trigger an alarm). Manual alarm event initiation (see Manual Initiation) also initiates sending push notifications to mobile devices.

      
      

   2. On the Server statistics screenStatus tab, go to the Pushes tab section and click subscribe SUBSCRIBE (see Server statistics screen The Status tab in AxxonNet client on Android OS).

   3. Make sure the device has access to Axxon Next AxxonNet notifications.

      Image Removed

      Info
      title Note
      Push notification is sent only when the alarm on camera is detected. If there are no you don't receive push notifications, restart the Android device.

5. In the Notifications period parameter (4) set the time period within which the repeated triggerings of the same camera will be ignored:

   1. None (all push notifications will be received);

   2. 5 seconds (default);

   3. 10 seconds;

   4. 1 minute.

   Info
   title Note
   After changing the Notifications period parameter value, it is necessary to restart the Android device.

   Image Removed

...