Versions Compared

Old Version 2

changes.mady.by.user Roman Nazarov

Saved on

compared with

New Version 3

changes.mady.by.user Gleb Matskevich

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

If traffic direction is set, then by default in case if the direction of vehicle movement does not coincide with the specified value, the Entered the oncoming lane alarm event will be created. This event can be disabled. If vehicle movement direction is undefined, the Entered the oncoming lane alarm event is not created.

Infonote
titleNote.Attention!

These settings are available This setting is given only when using the Auto-Uragan, Remote recognition or VIT modules are in use.For IntLab module the , VIT, and IntLab modules. For the IntLab module, the direction of carriages in the camera view is selected (from left to the left right or to the right) – from right to left (see Setting up the IntLab module).

To select the movement direction for the vehicles to be recognized, do the following:

  1. Go to the LPR channel object settings panel, corresponding to the activated module (see Activating the program module, used for identifying the plates section).
  2. From the Direction drop-down list (1), select the traffic direction relative to the camera in which it is necessary to recognize the LP numbers.
  3. Set the Undefined checkbox (2) if it is necessary to display the direction as Undefined in the Vehicle Tracer module, if it is not possible to determine the vehicle direction.

  4. If the from the camera or to the camera value is selected in the Direction dropdown list, the Record violation checkbox becomes available (3). By default this checkbox is set. That means that in case if the direction of vehicle moving is not coincide with the specified value, the Entering an oncoming lane alarm event will be created. If this event should not be created, uncheck the checkbox.

    Info
    titleNote.

    The following variations are possible depending on selecting the traffic direction:

    • if the to the camera direction is selected and the Record violation checkbox is set the recognition is performed in both direction; if traffic is performed from the camera the alarm event will be created;
    • if the from the camera direction is selected and the Record violation checkbox is set the recognition is performed in both direction; if traffic is performed to the camera the alarm event will be created;
    • if the to the camera direction is selected and the Record violation checkbox is not set the recognition is performed only in direction to the camera;
    • if the from the camera direction is selected and the Record violation checkbox is not set the recognition is performed only in direction from the camera;


  5. Click Apply (4).

...