Go to documentation repository
Page History
...
The following table shows the main parameters required for camera installation.
Parameter | Maximum value | Recommended (optimal) value |
|---|---|---|
Camera height | 20 m | 6 m |
Vertical inclination | 30 º | 18 º |
Horizontal inclination | 20 º | 5-10 º |
Maximum inclination of the license plate | 10 º | 10 º |
Control zone width of a CCTV camera:
- 3 m – frontal camera location;
- 3.2--3.7 m - side location with an angle of no more than 10-20.
Zone width of a 1 Mpix digital camera:
- 6.5 m – frontal location.
Zone width of a 3 Mpix digital camera:
- 11 m – frontal location.
| Note | ||
|---|---|---|
| ||
Licensing of the Auto-Uragan module depends on the number of motion lanes in the video camera control area. Calculation of the numbers of motion lanes is performed by internal module logic and depends on automatically defined typical minimal and maximum sizes of license plates (see the Setting up the Auto-Uragan module section). Maximal width of motion lane is 3.5 m.So if the width of video camera control area more than 3.5 metres, the license for 2 channels of the Auto-Uragan module is required. If the width of control area more than 7 metres, the license for 3 channels is required. |
Basic characteristics of used video cameras are presented in the General requirements for mounting and configuring of cameras section.
Overview
Content Tools