Versions Compared

Old Version 1

changes.mady.by.user Vadim Belyakov

Saved on

compared with

New Version 2

changes.mady.by.user Vadim Belyakov

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

The default setting for all detection tools (except Motion Detection) is Decode key frames (2). In this case, the frames are processed every 500 milliseconds or less often. To disable Decode key frames, select No in the appropriate field.

...


Note
titleImportant

Period and Decode key frames parameters are correlated.

If no local Clients are connected to a Server, the following rules are set for remote Clients:

  • If the interval between consecutive I-frames exceeds the value specified in the Period field, the detection tool will process I-frames.
  • If the I-frame frequency is lower than the value specified in the Period field, the detection tool will use the set value.

If at least one local Client connects to the Server, the detection tool is forced to use the set value. After the local Client disconnects, the indicated rules become valid again.

 


To configure detection of noise, blurred image and compression artifacts, do as follows:

  1. Max Processing Time is the maximum time for detection (3). If the bad image is not detected within the specified time, change the sensitivity settings.
  2. Sensitivity in standard units from 0 to 100 (5).

...