Page History

The number of objects shown on in the Log Panel or Control panel and Control Panel is set defined by the current filter (see The number of alarms displayed), if activated. Time periods are shown in the list on the left. If an alarm is recorded at an object during the selected time period, the alarm is placed in if it is enabled with the filtering button Image Added (Turn filter on/off).

Image AddedImage AddedImage Added

The left list allows to show objects with alarms of failures only, the connected or disconnected objects only. The middle list shows time periods. If there was an alarm during the selected period, it is included on the list. The right list shows the

...

alarm durations that trigger the filter

...

.

...

For example, with if you set the filter to "Current " and "- 1 minute" for filter settings, only those objects are shown that are currently in the alarm state and that have been having an alarm for at least one minute are shown. If "Day" and "5 hours" are selected, only objects that have had alarms during already been in this state for 1 minute or more. If you set the filter to "Day- 5 hours", only those objects are shown that have at least once been in the alarm state in the last 24 hours and that lasted were in this state for at least five hours are shown5 hours.

To calculate rates only for filtered objects, click Image Added (Calculate rates only for filtered table lines). If Alarms, Failures or Disconnected filter is enabled, rates are not calculated.