Versions Compared

Old Version 5

changes.mady.by.user Roman Nazarov

Saved on

compared with

New Version 6

changes.mady.by.user Roman Nazarov

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

  1. Go to the settings panel of the SIP-terminal object.
    Image Modified
  2. Set the Terminal type switch to the SIP server position (1)  — the SIP-terminal acts as a server, any SIP-clients can be connected to it (both Intellect-based and the third-party SIP-devices).
  3. From the Netw drop-down list (12), select the IP address of the network adapter that will be used to connect to the network where the SIP-clients are located.
  4. In the SIP port field (23), specify the port number which will receive the data from the SIP-clients.
  5. From the SIP transport drop-down list (34), select the transport level protocol to be used: TCP or UDP.
  6. If necessary, specify the RTP ports range in the corresponding text fields (45).
  7. Click Apply (56).

The network settings of the Intellect SIP-server are set.