Page History

The Virdi ACS SafeKey panel connection is configured as follows:

1. Go to the settings panel of the Virdi Server SafeKey Panel object, which is created on the basis of the Computer object on the Hardware tab of the System settingsSettings dialog windowbox.Image RemovedImage Added

2. In the

   Server port

   IP address field (1), enter the

   port

   IP address of the

   ACFA-Intellect Server to which the Virdi ACS is connected

   SafeKey panel.

3. Set

   In the

   Dynamic checkbox

   Port field (2)

   if it is necessary to automatically send the changes in employees, access rights or time zones to the corresponding controllers and readers for which these changes are made.
4. Press the Restart button (3) if it is necessary to reconnect to all controllers and readers.
5. Click the Write users button (4) if it is necessary to record the users to all controllers and readers.
6. From the Default authentication type drop-down list (5), select the default authentication type:
   • Fingerprint is only a fingerprint.
   • Fingerprint in card (*) is a fingerprint attached to the card.
   • Fingerprint + Password is a combination of a fingerprint and a password.
   • Password, if Fingerprint failed is a password if fingerprint authentication failed.
   • Card + Password + Fingerprint is a combination of a card, a password, and a fingerprint.
   • Password is a password only.
   • Card is only a card.
   • Card or Fingerprint is either a card or a fingerprint.
   • Card + Fingerprint is a combination of a card and a fingerprint.
   • Card or password is either a card or a password.
   • Card + password is a combination of a card and a password.
   • (ID or Card) + Fingerprint is a combination of a user ID or a card, and a fingerprint.
   • (ID or Card) + Password is a combination of a user ID or a card, and a password.
7. From the Default security level drop-down list (6), select the quality level of fingerprint verification from the lowest to the highest.

8. , enter the connection port of the SafeKey panel.

9. In the Password field (3) enter the password to connect to the SafeKey panel

   Click the Search devices button (7) to find all devices connected to the Server and build a tree of objects corresponding to the configuration

   .

10. Click the Apply button (

    8

    4) to save the

    changes

    settings.

The Virdi ACS connection is SafeKey panel connection is now configured.