Page History

The push notifications are configured in the Pushes section as follows:

1. In the Notifications period parameter (1) select the autoupdate interval for events:

   • No limit (push notification will be displayed at the moment of event);

   • 5 seconds;

   • 10 seconds;

   • 1 minute.

   Info
   title Note
   After changing the notifications period, it is necessary to restart the application.

   Set the Show images checkbox (2) to display the images in push notifications.

   Info
   title Note
   It is possible to receive push notifications from the Axxon Next Server in case the alarm event on camera is detected.

   To enable the push notifications receiving, perform the following actions in the direct order: 

   1. Connect to the required Axxon Next Server (Server (to Axxon Next - only via AxxonNet, to Intellect - directly, see Connection and Server operations in AxxonNet client on Android OS).   

      Note
      title ImportantAttention!
      To receive push notifications from the Axxon Next Server, connect do the following: Connect this Server to AxxonNet (see AxxonNet Setup and Operation). The push notifications from Axxon Next Server can be sent to mobile devices automatically and manually when initiating an alarm event: To send push notifications automatically, it is necessary to configure the corresponding macro to initiate an alarm event on the detector (see Trigger an alarm).Manual alarm  Manual alarm event initiation (see Manual Initiation) also initiates sending push notifications to mobile devices. To receive push notifications from the Intellect Server, it is necessary to activate and configure receiving push notifications in Intellect (see Configuring the Events filter for the Web-server 2.0 module).

      
      

   2. Subscribe to push notifications on the Status tab On the Status tab, go to the Pushes section and click SUBSCRIBE (see The Status tab in AxxonNet client on Android OS).

   3. Make sure the Android device has access to AxxonNet notifications.
      

2. In the Notifications period parameter (1), select the frequency of receiving notifications. Notifications will not come more often than specified in the period:

   • No limit;

   • 5 seconds;

   • 10 seconds;

   • 1 minute.

   Info
   title Note
   After changing the notifications period, it is necessary to restart the application.

   
   

3. Set the Show images checkbox (2) to display the images in push notifications.