Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

The Sweethearting at checkout detection module  module is configured on the settings panel of the Sweethearting at checkout detection object  object created under the Camera object on the Hardware tab of the System settings dialog box.

The Sweethearting at checkout detection module is configured as follows:

  1. Go to the settings panel of the Sweethearting at checkout detection module module.
  2. Click the Settings button (1).
    Image Modified
    The Detection settings window will open.
    Image Modified
  3. Specify the area of interest of the detection:
    1. Go to the Select area tab (1).
    2. Click Stop video to capture the video image (2).
    3. Click Area of interest (3).
    4. Specify the area of interest in the captured video image to be analyzed. The selected area must comply with Camera and camera settings requirements for the Sweethearting detection module .

      Info
      titleNote

      Only one area can be specified. If the second area is specified, then the first area will be deleted.

      To remove a selected area, click the  button next to the Area of interest button.


  4. Go to the Parameters (45) tab and perform the folowing following actions:
    Image Modified
  5. Specify the detection sensitivity in the range from 0.0 to 1.0 in the Detection sensitivity (0.0 - 1.0) parameter (56).

    By default the 0.65 value is set in the Detection sensitivity (0.0 - 1.0) parameter.
    Info
    titleNote

    The value is found experimentally.

    Specify the number of frames processed per second by the detcetion in the Maximum frame rate parameter (6).

    Info
    titleNote

    2-3 fps are enough for proper operation of the Sweethearting detection module.


  6. Click OK (7) to save changes and return to the settings panel of the Sweethearting detection Sweethearting at checkout detection object.

    Info
    titleNote

    To return to the control panel of the Sweethearting at checkout detection without  without saving changes, click Cancel.


  7. Click the Apply button (2) on the Sweethearting  detection control panel5).

The Sweethearting at checkout detection module  module is now configured.