Page History

...

1. Go to the Track counter object settings panel, which is created on the basis of the Neurotracker object.
   
2. On the video image, specify the surveillance area, within which the track counter will count the objects:
   1. Click the Settings button (1). As a result, the Detection settings window will open.
      
   2. Click the Stop video button (1) to capture a frame of the video image.

   3. Click the Surveillance territory button (2) and select the area, within which the track counter will count the objects (3).

      Info
      title Note
      To delete the selected area, click the  button (4).

      
      

   4. Click OK button (5).
3. From the If the Generate event only when the number is changed check box is not set, then from the Counter period drop-down list (2) , select the counter period time unit: seconds, minutes, hours, days.In the Counter period field  Then in the field (3), specify the time in which the event containing the total number of objects recorded for a given time period will be generated.

4. Set the the Generate the event only , when the number is changed checkbox (4) if it is necessary to generate the events only if when the number of recorded objects has changedchanges.

   Info
   title Note
   If this check box is set, the Counter period field becomes inactive, and the specified value of the counter period is ignored.

   
   

5. If objects are lost during the track counter operation, then for more accurate counting, set the Set number of frames for counting checkbox (5) and in the field (6) enter the number of frames that will be analyzed to calculate the average objects number.

   Info
   title Note
   This feature works only if the Generate event only when the number is changed checkbox is set. The value of the number of frames for counting is selected experimentally depending on the neural network used. Recommended values are: 3, 5, 7, 9.

   
   

6. Click the Apply button (57).

The neurotracker track counter is configured.