Page History

SIP-operators correspond to of the registered Intellect users.SIP-operators are configured on the Intellect's SIP - client are configured as follows:

1. Create a SIP-operator object based on the SIP-terminal object on the Hardware tab of the System Settings dialog box.
   

2. In

   the Ringing number field 

   the Number field (1)

   ,

   enter the

   operator

   identification number

   which one can call.

   for calls.

3. If it is necessary to bind a SIP-operator to the Intellect user rights, set the Bind operator to user rights checkbox (2) and select the corresponding Intellect user from the User drop-down list (3). It is used when the User rights are selected by default on the operator's SIP panel.

4. From the Device priority drop-down list (4), select the priority of a call from this operator in the incoming calls window of the SIP panel. The lower the number, the higher the priority, hence, the higher the call is displayed in the list. If the field is left blank, the priority is considered to be minimal. Calls from operators with the same priority will be sorted by the time of the call

   From the User drop-down list (2), select the corresponding Intellect user (for the details on creating and configuring the users, see Configuration of users and permissions)

   .

5. In the Address field (45), specify the IP address of the SIP-server.
6. In the Port field (56), specify the port of the SIP-server.
7. In the Login field (67), enter the username for connecting to the SIP-server.
8. In the Password field (78), specify the password for connecting to the SIP-server.
9. Go to the Address book tab (8).
   
   Image Removed

10. In

    the use column 

    the Address books table (9),

    mark those devices, operators and special numbers that should be available in the SIP panel address book of this operator.

    select the required address books, the numbers of which should be available for this SIP-operator (see Setting up the address book of a SIP terminal).

    Info
    title Note
    To add new lines to the table, use the Down key on your keyboard. To delete a line, use the Ctrl+Del key combination.

    1. To add all address books, click All (10).

    2. To add several address books, click Range (11). This will open the Add address books window.
       Image Added

       1. Select the required address books from the left list (1) and use the buttons (2) to move them to the right list (3).

       2. Click the Apply changes and close button (4).

11. Click Apply (12

    Click Apply (10

    ).

The configuration of SIP-operators on the Intellect SIP-client is complete.