Go to documentation repository
Page History
The settings panel of the SIP-device object is shown in the pictures below.
Table describes the parameters of the SIP-device system object.
№ | Parameter | Method for setting the parameter value | Description | Presented as | Default value | Range of values |
The | ||||||
Server connection settings group | ||||||
| 1 | The User ID field | Enter the value in the field | Sets the SIP-device identification number, i.e. the number to call it. | Integer | >=0 | |
| 2 | The Device IP address field | Enter the value in the field | For SIP-server terminal type only Sets the SIP-device IP address. | IP address | 1.0.0.0 - 255.255.255.255 | |
| 3 | The Password field | Enter the value in the field | For SIP-server terminal type only Sets the password specified on the SIP-device. | Latin, Cyrillic letters and service characters | A line representing a sequence of any symbols (letters, numbers, service symbols) | |
| 4 | The State field | Automatically | For SIP-server terminal type only Displays the SIP device state | - | - | - |
| 5 | The Device type drop-down list | Is selected in the list | Sets the icon type to represent the device on the Map. | Names of the available icon types | - | |
SIP client — the SIP-device acts as a client, it can be connected to any SIP-server
SIP server — the SIP-device acts as a server, any SIP-clients can be connected to it
No value touch panel speaker camera microphone default |
| 6 | The Device priority drop-down list | Is selected in the list | Sets the priority of a call from this device |
in the incoming calls window of the SIP panel | Integer | - | 0 – 10 The |
lower the number, the higher the priority and, accordingly, the higher the display in the list. If the field is left |
blank, then the priority is considered to be minimal. |
Calls from devices with the same priority will be sorted by the time of the call. |
The Video / Audio tab (only for SIP server terminal type)Table describes the parameters of the SIP-device settings panel.
Table describes the parameters of the SIP-device settings panel Video / Audio tab.
№ | Parameter | Method for setting the parameter value | Description | Presented as | Default value | Range of values |
| The Video/Audio tab (for SIP-server terminal type only) | ||||||
| 1 | The Video switch | Set the switch to the required position | Sets the video camera used for calls | Supported options of camera usage | Off | Off — the video is not used during the call. SIP camera — a SIP-device camera connected via the SIP protocol is used. Other — any other camera from the Intellect hardware tree selected from the Camera drop-down list is used. |
| 2 | The Camera drop-down list | Is selected in the list | Sets any video camera used for calls | Name of the Camera objects registered in the system. | - | Depends on the number of the Camers objects in the system. |
| 3 | The Audio switch | Set the switch to the required position | Sets the microphone used for calls | Supported options of audio usage | Off | Off — the audio is not used during the call. On — the microphone of the SIP-device is used. |
| 4 | The Microphone field | Automatically | Displays the name of the Microphone object corresponding to the SIP device | - | - | - |
The Relay tab (only for SIP server terminal type)
Table describes the parameters of the SIP-device settings panel Relay tab.
№ | Parameter | Method for setting the parameter value | Description | Presented as | Default value | Range of values |
| 1 | The DTMF type drop-down list | Is selected in the list | Sets the type of the tone DTMF command | Supported signal type | sip_info | sip_info – signals are transmitted in |
the SIP INFO message. sip_notify – signals are transmitted in the SIP NOTIFY message. in_band – the signal is transmitted as normal sound in an audio stream. http_bas – signals are transmitted over the HTTP protocol separately from the voice stream |
sip_info – signals are transmitted in the SIP INFO message.
sip_notify – signals are transmitted in the SIP NOTIFY message. | ||||||
| 2 | The Signal duration, ms field | Enter the value in the field | Sets the time period in milliseconds during which the command is to be sent. | Integer | >0 | |
| The Device connection settings group | ||||||
| 3 | The Login field | Enter the value in the field | Sets the user name to connect to the (BasIP) SIP device | Latin, Cyrillic letters and service characters | - | A line representing a sequence of any symbols (letters, numbers, service symbols) |
| The Password field | Enter the value in the field | Sets the password to connect to the (BasIP) SIP device | Latin, Cyrillic letters and service characters | - | A line representing a sequence of any symbols (letters, numbers, service symbols) | |
| The IP address field | Enter the value in the field | Sets the (BasIP) SIP device IP address | IP address | - | 1.0.0.0 - 255.255.255.255 | |
| 4 | The Name field | Enter the value in the field | Sets the name of the command displayed on the SIP panel | Latin, Cyrillic letters and service characters | A line representing a sequence of any symbols (letters, numbers, service symbols) | |
| 5 | The Code field | Enter the value in the field | Sets the unique command code | Integer or HTTP request (for http_bas) | ||
A line containing a natural number or HTTP request |
Overview
Content Tools