Page History

...

1. Select the License plate recognition (VT) object (1).
   

2. If you require using this detection tool for real-time number plate recognition (see Configuring real-time vehicle license plate recognition), set the corresponding parameter to Yes (2).

3. If you need to enable recording of metadata, select Yes from the Record Objects tracking list (3).
4. If a camera supports multistreaming, select the stream for which detection is needed. Selecting a low-quality video stream allows reducing the load on the Server (4).
   Image Added

5. In the appropriate fields, select one or more countries for ANPR (12).Image Removed

   Note
   title Important
   The more countries you select, the slower the recognition and the greater the likelihood of the recognition error.

   
   

6. Select a processing resource for decoding video streams (3). When you select a GPU, a stand-alone graphics card takes priority (when decoding with NVidia NVDEC chips). If there's no appropriate GPU, the decoding will use the Intel Quick Sync Video technology. Otherwise, CPU resources will be used for decoding.

7. Analyzed framed are scaled down to a specified resolution (2, 1920 pixels on the longer side). This is how it works:

   1. If the longer side of the source image exceeds the value specified in the Frame size change field, it is divided by two.

   2. If the resulting resolution falls below the specified value, it is used further.

   3. If the resulting resolution still exceeds the specified limit, it is divided by two, etc.

      Info
      title Note
      For example, the source image resolution is 2048 * 1536, and the limit is set to 1000. In this case, the source resolution will be divided two times (down to 512 * 384): after the first division, the number of pixels on the longer side exceeds the limit (1024 > 1000).

      
      

   
   

8. Select the current license type (35).

   License	Description
   Search in archive	Basic ANPR Search License. Attention! This type of license provides a 30-sec delay between the number recognition and the corresponding event.  (see Vehicle number plate recognition and search).
   25 FPS or 6 FPS	The 25 FPS license has a priority. The 6 FPS license is used only if you have no 25 FPS license. You cannot use the number plate recognition function if you have no FPS licenses purchased.
   25 FPS	The "Fast" license allows you to process video feeds up to 25 fps with a maximum vehicle speed of 150 km/h. You have to obtain an appropriate license to make ANPR work.
   6 FPS	The "Slow" license allows you to process video feeds up to 6 fps with a maximum vehicle speed of 20 km/h. You have to obtain an appropriate license to make ANPR work.

   
   

   Note
   title Important
   All license types except the standard one (Search in archive) require the hardware key or the software key activation (see Activating a software license key for the ANPR). You can use a 60-day trial key (see Activating the trial version of the ANPR via a software key).

   
   

   Note
   title Important
   On a virtual machine, you may use only a hardware key. To use a hardware key, select the 25 FPS or 6 FPS license type.

   
   

9. Set the maximum and minimum width of the vehicle number plate as a percentage of the FoV width (46, 5 7).

   Note
   title Important
   The Minimum LP width parameter affects the CPU load as follows: the higher the parameter is, the higher the load.

   
   

10. Set the number of frames required for LPR / ANPR (69). This is though a necessary condition, but not sufficient for the first output. This condition delays LPR output.  This parameter allows to increase the reliability of the results, as well as to hide false positives.

11. If necessary, configure  advanced detection settings (see Fine-tuning the VT number plate detection tool).

12. You can configure an ANPR zone in FoV. The zone is resized by moving the anchor points.
    

    Info
    title Note
    For your convenience, you can click the  button and configure the mask on a still frame / snapshot. To undo, click this button again.

    
    

    Info
    title Note
    Detection zone is displayed by default. You can click the  button to hide the zone. To undo, click this button again.

    
    

13. Click the Apply button.

...