Page History

...

1. Set the Full hexadecimal mode checkbox (3) if it is necessary to use the entire card number in hexadecimal notation.
   
2. Set the Full decimal mode checkbox (2) if it is necessary to use the entire card number in decimal notation.
3. In the Get bit range from card data group, set the settings for the received card data:
   1. Set the length in bits of the card data (3).
   2. Set the offset in bits of the card data (4).
   3. Set the Invert byte order checkbox (5), if it is necessary to invert the bit byte order of the card data.
   4. Set the Invert bit values checkbox (6) if it is necessary to invert the bits of the card data.
   5. Set the Add high bit checkbox (7) if it is necessary to add the high-order bit to the received data, and select the type of the high-order bit to be added from the drop-down list.
   6. Set the Add low bit checkbox (8) if it is necessary to add the low-order bit to the received data, and select the type of the low-order bit to be added from the drop-down list.
4. In the Get card code from range group, set the settings for the received card code:
   1. Set the length in bits of the card code (9).
   2. Set the offset in bits of the card code (10).
   3. Set the Invert byte order checkbox on (11) if it is necessary to invert the byte order of the card code.
   4. Set the Invert bit order checkbox (12) if it is necessary to invert the bit order of the card code.
5. In the Get facility code from range group, set the settings for the received facility code of the card:
   1. Set the length of the facility code in bits (13).
   2. Set the offset of the facility code in bits (14).
   3. Set the Invert byte order checkbox (15) if it is necessary to invert the byte order in the facility code.
   4. Set the Invert bit order checkbox (16) if it is necessary to invert the bit order of the facility code.
6. In the Facility code field (17), if necessary, enter the facility code, which will be automatically assigned to all access cards.
7. Click Apply (18).

...