Page History

...

1. Time period for the report. Use the Beginning date, Beginning time, End date, and End time parameters for this.
2. Object description. This setting allows switching between the two report modes:
   1. Report on all system objects
   2. Report on one system object
      
3. Report type. This setting allows switching between the five available reports:
   1. snapshots – operations. These are snapshots during the time when bank card transactions were being performed at the ATM.
   2. snapshots – alarms. These are snapshots after an alarm sensor was triggered at the object ("Vibration sensor", "Lock open sensor", etc.).
   3. snapshots – other. These are snapshots obtained by a custom video archive query.
   4. video frames – alarms. These are video frames obtained after an alarm sensor is triggered at the object.
   5. video frames – other. These are video frames obtained  by a custom video archive query.
      
4. If you select Video frames – Others report type, the Camera parameter becomes available. Use this parameter to specify select the camera from which you want to get video frames.
   

5. If you select snapshots – operations report type, the Camera, Card number, and Operation sum parameters become available.

   Info
   title Note
   The Card number field is auto-filled. Each card number entered in this field will be stored in the database and will be automatically inserted into the field upon retyping.

   
   

After configuring all parameters, click OK. A separate window displays the results of search for snapshots for the specified criterion.

...