Go to documentation repository
Page History
The Teltonika tracking system connection to ACFA Intellect is configured as follows:
- Go to the settings panel of the Teltonika object, which is created on the basis of the Computer object on the Hardware tab of the System settings dialog box.
Из раскрывающегося списка From the Connection mode drop-down list (1) выбрать типа протоколаselect the protocol type: TCP или or UDP.
В поле In the Local IP Address field (2) указать в явном виде локальный или статический (публичный) IP-адрес сервера, который задан в конфигураторе Teltonika (см. , explicitly specify the local or static (public) IP address of the server, which is specified in the Teltonika configurator (see Pre-configuring the Teltonika tracking system). В случае использования локального IP-адреса на него должен перенаправляться трафик со статического (публичного) адреса сервера.
В поле Local port (3) указать порт приема событий от трекеров.
Нажать кнопку Search devices (4), чтобы выполнить поиск трекеров. Для найденных в сети трекеров будут созданы соответствующие данным устройствам дочерние объекты.
- Нажать кнопку Применить (5) для сохранения внесенных изменений.
If a local IP address is used, the traffic from the static (public) server address should be redirected to it.
In the Local Port field (3), specify the port for receiving the events from the trackers.
Click the Search for devices button (4) to search for the trackers. For the trackers found in the network, the child objects corresponding to these devices will be created.
- Click Apply (5) to save the changes.
The Teltonika tracking system connection to ACFA Intellect is now configuredНастройка подключения системы геотрекинга Teltonika завершена.