Page History

Configure the Face Detection object detection module operation with a thermal camera or an external system as follows:

1. Go to the External source tab on the settings panel of the the Face Detection object.
   

2. From the Combined work drop-down list (1) select the combined operation mode:

   • No -

      

      combined operation mode is not used.

   • Combine with thermal camera temperature

     - 

      - receiving the temperature and coordinates of a captured face frame from the thermal camera. A photograph of a captured face will be obtained from the capturing camera. If this mode is selected, the following setting become available:

     • In the 

       Thermal camera reply timeout,

       sec field

       s (2)

       , enter

       - sets the timeout in seconds for

       the reply

       receiving data from the thermal camera

       with the temperature

       .

       Info
       title Note
       The FIND_PERSON event is will be generated only when the temperature is received from the thermal camera or after the time , specified in the the Thermal camera reply timeout, secs parameter.

       
       

   • Get photo from thermal camera

     - 

      - receiving the temperature and photos of a captured face from the thermal camera.

   • Get photo and metadata from external system -

     receiving the temperature and photos of a captured face from a thermal camera or Axxon Next.

3. Click Apply (3) to save the changes

   To save the changes click the Apply button (3)

   .