Page History

...

1. Switch on the control device.
2. Enter username and password in the device display. The default credentials are as follows:
   
   1. login: admin
   2. password: 123456
3. Configure the device network configuration. To do this, in the Local Cfg -> Net Cfg menu, set the following settings:
   
   1. IP address
   2. Mask
   3. Gateway
4. Add Intellect Server/Client to the internal configuration of the device. To do this, in the Dev Manage -> Manual Cfg -> Add Dev menu, set the following settings:
   
   1. ID – enter any number (range: 1-240, the number must not coincide with the ID of the remote control or other already added device).
   2. name – enter a string (1-8 characters).
   3. DType – select VM (VideoManagementSystem, i.e. Intellect).
   4. LType – select NetWork (the device is integrated for connecting to Intellect via the network).
   5. After selecting LType, press the button on the joystick and enter the IP address of the Intellect server  Server/Client and the port used (60000 by default).
5. Connect to the Intellect Server/Client added in the previous step. To do this, enter the above ID in the FindDev -> Dev ID menu or select the found profile in the Dev Manage -> Search Dev menu.
6. If the device is found, information about it will be displayed on the device display.
7. Press on the ID field. As a result, it will be possible to work with the control device in Intellect.

...