Page History

Configuring the connection with ATM-Intellect Pro

To configure the connection with ATM-Intellect Pro, do the following:

1. In the ATM IDfield specify identification number of the ATM. This value should match the "ID" value in the settings of ATMConnection to dropbox (1) select ATM-Intellect Pro (1).
   Image Modified
   Image Removed
2. In the IP address field (2) specify the IP address of the computer on which Intellect and ATM-Intellect Pro are installed (2) . If they are installed on the ATM's control computer, you can leave the default value unchanged (127.0.0.1).
3. In the TCP portfield (3) specify the TCP port on which ATM-Intellect Pro expects connections from ATM Event Capture. This value should match the TCP port (UPS-SCS) value in the settings of ATM-Intellect Pro (3Pro (see Setting the port used to listen for messages from the UPS and Smart Card Service ATMs).
4. To save settings, click the Save button (4).

Configuring the connection with Axxon Next

Configuring POS devices

To configure the connection with Axxon Next, do the following:

1. In the Connection to dropbox (1) select POS.
   Image Added
2. In the

...

1. IP address field (2) specify the IP address of the computer on which Axxon Next is installed. If it is installed on the ATM's control computer, you can leave the default value unchanged (127.0.0.1).
2. In the TCP portfield (3) specify the TCP port on which Axxon Next expects connections from ATM Event Capture (see Connecting POS devices).
3. To save settings, click the Save button.