Page History
...
- On the No RAID calculation tab, set the parameters of the archive depth and the average number of hours per day during which it is planned to record into the archive.
- Go to the Calculation based on RAID tab and select the RAID level. The following options are available:
- JBOD – simple consolidation of disks, which is not a RAID level.
- RAID-0 – RAID 0, an array of disks with data striping.
- RAID-10 – RAID 10, an array of disks with mirroring and striping.
- RAID-5 – RAID 5, an array of disks with block-level striping and one checksum.
- RAID-6 – RAID 6, an array of disks with block-level striping and two checksums.
- Specify the Disk size in the selected units (GB or TB). It is assumed that RAID will be built on the basis of disks of the specified size. The calculation results indicate the required number of disks and other RAID parameters (see Platform calculation results for Axxon Next and Intellect Server).
Overview
Content Tools