Page History

...

1. Go to the Hardware tab in the System settings dialog box (1).
2. Select the Camera object corresponding to the required camera in the objects tree (2). The settings panel for the selected object is displayed on the right of the Hardware tab.
3. Go to the Basic settings tab on the settings panel of the Camera object (3).
   Image Modified
4. In the "Hot record" rate field (4) specify the frame rate for hot recording of the alarm event.
   The value specified in the "Hot record" rate ​​parameter allows you to calculate the time interval (in milliseconds), after which it is necessary to capture a frame for recording into the archive. The calculation is made according to the formula:
   Time interval = 1000 / The value specified in the "Hot record" rate ​​field
   The value of this parameter should not exceed the value of the frame rate with which the video signal is digitized.

5. In the "Hot record" time field (5) specify the interval in seconds from the moment of alarm registration or the start of recording, during which the video is recorded with the frame rate specified in the "Hot record" rate ​​field.

   Info
   title Note.
   If there is an end of alarm event while recording in the hot record mode, then recording to the archive will be with the same rate as hot record until the end of specified interval.

   
   

6. Click the Apply button (6).

...