Page History

...

1. Go to the Train detection control panel.
   
2. Click the Settings button. The Detection settings windows will open.
3. Specify the surveillance area on the video image:
   1. Click the Stop video button to capture the video image (1).
      
   2. Click the Surveillance territory button (2).

   3. On the captured video image (3) sequentially specify nodal points of area to be analyzed by clicking the left mouse button (1). It is possible to add only one area. While attempting to add the second area the first one will be deleted. After area specifying the remaining part of video image will be darkened.
      

      Info
      title Note.
      To remove the area click the  button next to the Surveillance territory button.

      
      

      Info
      title Note.
      The area of interest The surveillance territory is to be specified in such a way as to be no any motion in it except of the train motion.

      
      

      Note
      title Attention!
      Setting the Surveillance territory is a mandatory requirement for the detection module operation.

      
      

4. Go to the Setting tab (4) and do the following:
    
   1. In the Number of processed frames per second (0.016-100) field (5), set the number of frames per second that will be processed by the detection tool.

   2. Click the OK button to save changes and return to the control panel of the Train detection (6).

      Info
      title Note.
      To return to the control panel of the Train detection without saving changes, click Cancel.

      
      

5. Click Apply on the Train detection control panel.

...