Page History

The AUTO-Uragan, CARMEN-Auto, RoadAR and VIT recognition modules enable estimating vehicle speed by video. The speed can be received in Auto-Intellect software to be shown as captions over the camera video image via the Auto Intellect algorithm. The results are displayed over video image as captions.

To configure speed estimation by video, do the following:

1. Go to the LPR channel object settings panel, corresponding to the activated module (see Activating the software module used for identifying the plates section).
   Image Added
2. Go to the Speed camera settings tab (1).Image Removed
3. Set the Get speed from video checkbox (2). As a result, settings for speed estimation become available.
4. Click the Configuration button (3). The Get speed from video dialog box opens.
   
   1. Click Stop Start video (1).
   2. Add a line segment of a known length in centimeters to the video image (2).
   3. Click OK (3).
5. In the Distance field, enter the length of the previously specified line segment in centimeters (4).
6. Enter permitted vehicle speed in the Permitted speed field (5).
7. Enter maximum vehicle speed in the Alarm on speed limit field. If this speed is exceedexceeded, an alarm event is generated (6).
8. Click Apply (7).

...